Quick answer
Depending on trim, the 2014 Ford Explorer uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything. Big Daddy Car Key Replacement makes 2014 Ford Explorer keys on site, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2014 Ford Explorer
- Typical key
- Smart proximity key or remote head key, depending on trim
- Transponder chip
- Yes on most; varies by trim
- Blade
- Laser-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2014 Ford Explorer use?
- How we make a 2014 Ford Explorer key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- Getting a 2014 Ford Explorer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2014 Ford Explorer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Explorer years
- Other Ford models
- Related automotive locksmith services
- Where we make 2014 Ford Explorer keys
- 2014 Ford Explorer key replacement: frequently asked questions
What kind of key does a 2014 Ford Explorer use?
Depending on trim, the 2014 Ford Explorer uses either a smart proximity key with push-button start or a remote head key with a conventional ignition. We confirm which one your vehicle has before cutting anything.
Smart proximity key
A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat.
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps.

How we make a 2014 Ford Explorer key
For the 2014 Ford Explorer we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep. Most smart keys take 30 to 60 minutes including programming. Vehicles that need server authorization or have all keys lost can take longer.
This page covers the 2014 model year. For other years, see the Ford Explorer key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ford right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a 2014 Ford Explorer key made, step by step
Call with the year, make and model
Tell us you need a key for a 2014 Ford Explorer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2014 Ford Explorer key
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Smart keys are the most expensive type because of the fob itself and the secured programming. The model year, the system generation, and whether any working key remains all affect the price. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Situations we are called to most often
- A hardware-store copy opens the door but the engine will not start.
- The key fob went through the washing machine.
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The key is locked in the trunk and the trunk release is disabled.
Why drivers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Looking after your Ford key
When the dash warns that the key battery is low, replace the coin cell promptly. If it dies, hold the fob against the start button or in the marked backup spot to start the car.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
Choosing a car locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Other Ford Explorer years
- 2026 Explorer
- 2025 Explorer
- 2024 Explorer
- 2023 Explorer
- 2022 Explorer
- 2021 Explorer
- 2020 Explorer
- 2019 Explorer
- 2018 Explorer
- 2017 Explorer
- 2016 Explorer
- 2015 Explorer
- 2013 Explorer
- 2012 Explorer
- 2011 Explorer
- 2010 Explorer
- 2009 Explorer
- 2008 Explorer
- 2007 Explorer
- 2006 Explorer
- 2005 Explorer
- 2004 Explorer
- 2003 Explorer
- 2002 Explorer
- 2001 Explorer
- 2000 Explorer
- 1999 Explorer
- 1998 Explorer
- 1997 Explorer
- 1996 Explorer
- 1995 Explorer
- 1994 Explorer
- 1993 Explorer
- 1992 Explorer
- 1991 Explorer
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Emergency Vehicle Lockout
Fast unlocking for cars, trucks, SUVs, vans and work vehicles.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Spare Car Key
Creating duplicate or backup keys.
- Motorcycle Key Replacement
Replacing lost or broken motorcycle keys.
- RV Key Replacement
Replacing keys for RV doors, compartments, storage locks and ignitions.
Where we make 2014 Ford Explorer keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- 2014 Ford Explorer keys in Bellflower
- 2014 Ford Explorer keys in La Verne
- 2014 Ford Explorer keys in Rolling Hills Estates
- 2014 Ford Explorer keys in La Habra Heights
- 2014 Ford Explorer keys in Fillmore
- 2014 Ford Explorer keys in Bell Gardens
- 2014 Ford Explorer keys in View Park–Windsor Hills
- 2014 Ford Explorer keys in Rowland Heights
- 2014 Ford Explorer keys in Simi Valley
- 2014 Ford Explorer keys in Vernon
- 2014 Ford Explorer keys in Gardena
- 2014 Ford Explorer keys in La Puente
- 2014 Ford Explorer keys in Arleta
- 2014 Ford Explorer keys in Bradbury
- 2014 Ford Explorer keys in Athens
- 2014 Ford Explorer keys in Rosemead
- 2014 Ford Explorer keys in La Cañada Flintridge
- 2014 Ford Explorer keys in West Carson
- 2014 Ford Explorer keys in Rolling Hills
- 2014 Ford Explorer keys in Hawaiian Gardens
- 2014 Ford Explorer keys in Azusa
- 2014 Ford Explorer keys in Pacoima
- 2014 Ford Explorer keys in Artesia
- 2014 Ford Explorer keys in Ojai
2014 Ford Explorer key replacement: frequently asked questions
How do I start my 2014 Ford Explorer if the smart key battery is dead?
Use the emergency blade to open the door, then hold the fob directly against the start button, or place it in the backup slot if your model has one, and press the button. The car reads the chip at close range without battery power.
Can a locksmith program a smart key for a 2014 Ford Explorer?
In most cases, yes, at your location. A small number of late-model systems are restricted to dealer-supplied keys. Call (562) 550-7206 with your VIN and we will tell you which applies.
Can a used smart key from another Ford be programmed to my car?
Often not directly. Many smart keys lock to the first vehicle they are programmed to. Some can be reset with special equipment and some cannot be reused at all, so we check before you pay for programming.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Do I have to tow my 2014 Ford Explorer to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you also repair the ignition on a 2014 Ford Explorer?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost 2014 Ford Explorer key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you unlock my 2014 Ford Explorer if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
Can you program a key I bought online for my 2014 Ford Explorer?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
