Quick answer
Big Daddy Car Key Replacement cuts and programs Ram ProMaster City keys on site across Los Angeles County, Ventura County and the Anaheim area of Orange County, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Ram ProMaster City
- Model years covered
- 2015–2022
- Service area
- Los Angeles, Ventura & Orange County
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Ram ProMaster City keys made and programmed on site
- Ram ProMaster City key types by model year
- Choose your Ram ProMaster City year
- Types of Ram ProMaster City keys
- How Ram key and immobilizer systems work
- Common Ram key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ram right now?
- Getting a Ram ProMaster City key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ram key?
- What affects the cost of a Ram ProMaster City key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Ram key
- Choosing a car locksmith you can trust
- Other Ram models
- Related automotive locksmith services
- Where we make Ram ProMaster City keys
- Ram ProMaster City key replacement: frequently asked questions
Ram ProMaster City keys made and programmed on site
The Ram ProMaster City was sold in the United States for model years 2015–2022, and its key technology changed along the way. We make keys for every one of those years: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram ProMaster City key types by model year
The table shows the key most Ram ProMaster City models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 2015–2022 | Remote head key | Yes | Laser-cut |
Choose your Ram ProMaster City year
Select a model year for the exact key type, programming method and what to expect.
- 2022 Ram ProMaster City
- 2021 Ram ProMaster City
- 2020 Ram ProMaster City
- 2019 Ram ProMaster City
- 2018 Ram ProMaster City
- 2017 Ram ProMaster City
- 2016 Ram ProMaster City
- 2015 Ram ProMaster City
Types of Ram ProMaster City keys
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram ProMaster City we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.
How Ram key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Common Ram key and lock problems
These are the issues we see most often on Ram vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ram right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a Ram ProMaster City key made, step by step
Call with the year, make and model
Tell us you need a key for a Ram ProMaster City, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ram key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Ram ProMaster City key
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Situations we are called to most often
- A used car was sold with one worn key and no spare.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- The dash reads "key not detected" and the start button does nothing.
- The key fob went through the washing machine.
- The ignition will not turn and the key will not come out.
Why drivers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Ram key
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
Choosing a car locksmith you can trust
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
Other Ram models
Related automotive locksmith services
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Key Fob Programming
Programming new or replacement key fobs.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Broken Car Key Extraction
Removing broken keys from ignitions, door locks, trunks and glove boxes.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
Where we make Ram ProMaster City keys
Big Daddy Car Key Replacement is a mobile service covering 150 communities across Los Angeles County, Ventura County and the Anaheim area of Orange County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- Ram ProMaster City keys in San Dimas
- Ram ProMaster City keys in Downey
- Ram ProMaster City keys in South El Monte
- Ram ProMaster City keys in Placentia
- Ram ProMaster City keys in Porter Ranch
- Ram ProMaster City keys in Bell Gardens
- Ram ProMaster City keys in Maywood
- Ram ProMaster City keys in Chatsworth
- Ram ProMaster City keys in Sun Valley
- Ram ProMaster City keys in Monterey Park
- Ram ProMaster City keys in Woodland Hills
- Ram ProMaster City keys in Buena Park
- Ram ProMaster City keys in Moorpark
- Ram ProMaster City keys in Valley Village
- Ram ProMaster City keys in Santa Monica
- Ram ProMaster City keys in Gardena
- Ram ProMaster City keys in Temple City
- Ram ProMaster City keys in Culver City
- Ram ProMaster City keys in Garden Grove
- Ram ProMaster City keys in Torrance
- Ram ProMaster City keys in San Fernando
- Ram ProMaster City keys in Fullerton
- Ram ProMaster City keys in Duarte
- Ram ProMaster City keys in Diamond Bar
Ram ProMaster City key replacement: frequently asked questions
Do I need a PIN code to program a Ram key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Ram with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Do I have to tow my Ram ProMaster City to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Is a locksmith-made Ram key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
What do you need from me to make a Ram ProMaster City key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you unlock my Ram ProMaster City if the keys are inside?
Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.
How many keys should I have for my Ram ProMaster City?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Can you program a key I bought online for my Ram ProMaster City?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Can you make a key for a Ram ProMaster City if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
