Quick answer
Big Daddy Car Key Replacement cuts and programs Ram ProMaster keys on site across Los Angeles County and Ventura County, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- Ram ProMaster
- Model years covered
- 2014–present
- Service area
- Los Angeles & Ventura County
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your vehicle
- Phone
- (562) 550-7206
On this page
- Ram ProMaster keys made and programmed on site
- Ram ProMaster key types by model year
- Choose your Ram ProMaster year
- Types of Ram ProMaster keys
- How Ram key and immobilizer systems work
- Common Ram key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ram right now?
- Getting a Ram ProMaster key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ram key?
- What affects the cost of a Ram ProMaster key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers choose Big Daddy
- Looking after your Ram key
- Choosing a car locksmith you can trust
- Other Ram models
- Related automotive locksmith services
- Where we make Ram ProMaster keys
- Ram ProMaster key replacement: frequently asked questions
Ram ProMaster keys made and programmed on site
The Ram ProMaster was sold in the United States for model years 2014–present, and its key technology changed along the way. We make keys for every one of those years: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram ProMaster key types by model year
The table shows the key most Ram ProMaster models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.
| Model years | Typical key | Transponder chip | Blade |
|---|---|---|---|
| 2014–2026 | Remote head key | Yes | Laser-cut |
Choose your Ram ProMaster year
Select a model year for the exact key type, programming method and what to expect.
- 2026 Ram ProMaster
- 2025 Ram ProMaster
- 2024 Ram ProMaster
- 2023 Ram ProMaster
- 2022 Ram ProMaster
- 2021 Ram ProMaster
- 2020 Ram ProMaster
- 2019 Ram ProMaster
- 2018 Ram ProMaster
- 2017 Ram ProMaster
- 2016 Ram ProMaster
- 2015 Ram ProMaster
- 2014 Ram ProMaster
Types of Ram ProMaster keys
Remote head key
A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram ProMaster we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.
How Ram key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Common Ram key and lock problems
These are the issues we see most often on Ram vehicles:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ram right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
Getting a Ram ProMaster key made, step by step
Call with the year, make and model
Tell us you need a key for a Ram ProMaster, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ram key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a Ram ProMaster key
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- The dash reads "key not detected" and the start button does nothing.
- The key is locked in the trunk and the trunk release is disabled.
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
- The key fob went through the washing machine.
Why drivers choose Big Daddy
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Looking after your Ram key
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
Choosing a car locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
Other Ram models
Related automotive locksmith services
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Spare Car Key
Creating duplicate or backup keys.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
Where we make Ram ProMaster keys
Big Daddy Car Key Replacement is a mobile service covering 140 communities across Los Angeles County and Ventura County. The work is done wherever the vehicle is parked. A few of the areas we serve are listed here; see all service areas for the rest.
- Ram ProMaster keys in West Hills
- Ram ProMaster keys in La Mirada
- Ram ProMaster keys in San Marino
- Ram ProMaster keys in Pasadena
- Ram ProMaster keys in Walnut
- Ram ProMaster keys in Valley Glen
- Ram ProMaster keys in Willowbrook
- Ram ProMaster keys in Manhattan Beach
- Ram ProMaster keys in Temple City
- Ram ProMaster keys in Pacoima
- Ram ProMaster keys in North Hills
- Ram ProMaster keys in Sherman Oaks
- Ram ProMaster keys in Stevenson Ranch
- Ram ProMaster keys in Claremont
- Ram ProMaster keys in La Habra Heights
- Ram ProMaster keys in Studio City
- Ram ProMaster keys in Pico Rivera
- Ram ProMaster keys in Santa Monica
- Ram ProMaster keys in Maywood
- Ram ProMaster keys in San Fernando
- Ram ProMaster keys in Van Nuys
- Ram ProMaster keys in Commerce
- Ram ProMaster keys in Monrovia
- Ram ProMaster keys in Ventura
Ram ProMaster key replacement: frequently asked questions
Do I need a PIN code to program a Ram key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Ram with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Can you program a key I bought online for my Ram ProMaster?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
Do you also repair the ignition on a Ram ProMaster?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
How many keys should I have for my Ram ProMaster?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Will my lost Ram ProMaster key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Is a locksmith-made Ram key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
How much does a Ram ProMaster key cost?
It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.
What do you need from me to make a Ram ProMaster key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
