Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Ram ProMaster Key Replacement in Pasadena, CA

Need a Ram ProMaster key in Pasadena? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Ram ProMaster Key Replacement in Pasadena, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Ram ProMaster keys on site in Pasadena, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Ram ProMaster
Model years covered
2014–present
Service area
Pasadena, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Ram ProMaster keys made and programmed on site

The Ram ProMaster was sold in the United States for model years 2014–present, and its key technology changed along the way. We make keys for every one of those years in Pasadena: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram ProMaster key replacement in Pasadena
Ram ProMaster keys are cut and programmed at the vehicle in Pasadena.

Ram ProMaster key types by model year

The table shows the key most Ram ProMaster models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Ram ProMaster.
Model yearsTypical keyTransponder chipBlade
2014–2026Remote head keyYesLaser-cut

Choose your Ram ProMaster year

Select a model year for the exact key type, programming method and what to expect.

Types of Ram ProMaster keys

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram ProMaster we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.

How Ram key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Common Ram key and lock problems

These are the issues we see most often on Ram vehicles in Pasadena:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Ram right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Ram ProMaster key replacement across Pasadena

Located in Los Angeles County, Pasadena is an incorporated city within our San Gabriel Valley service area. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.

Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.

People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.

Getting a Ram ProMaster key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Ram ProMaster, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Ram ProMaster key in Pasadena
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ram key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Ram ProMaster key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.

Situations we are called to most often

  • The ignition will not turn and the key will not come out.
  • A used car was sold with one worn key and no spare.
  • The dash reads "key not detected" and the start button does nothing.
  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.

Why drivers in Pasadena choose Big Daddy

One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Ram car key service in Pasadena
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ram key

  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.

Other Ram models

Ram ProMaster keys near Pasadena

We make Ram ProMaster keys in the communities around Pasadena as well. See the main Ram ProMaster key replacement page or the Pasadena locksmith page.

Ram ProMaster key replacement in Pasadena: frequently asked questions

Do I need a PIN code to program a Ram key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Ram with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Is a locksmith-made Ram key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you program a key I bought online for my Ram ProMaster?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

How much does a Ram ProMaster key cost?

It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.

Can you make a Ram ProMaster key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

What do you need from me to make a Ram ProMaster key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Can you unlock my Ram ProMaster if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Will my lost Ram ProMaster key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Which parts of Pasadena do you serve?

All of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, and Bungalow Heaven, and addresses in ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.

Do you have a locksmith shop in Pasadena?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Pasadena and the rest of the San Gabriel Valley area. All work is done at your location.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Call Now (562) 550-7206Open 24 hours · mobile locksmith