Quick answer
Panic Bar Installation: Installing panic bars, push bars and crash bars for emergency exits. Big Daddy Car Key Replacement provides panic bar installation service in Altadena as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Panic Bar Installation
- Area
- Altadena, Los Angeles County, CA (91001)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our panic bar installation service
- Customers we serve in Altadena
- When you need panic bar installation service
- Panic Bar Installation across Altadena
- Our panic bar installation process, step by step
- Common situations in Altadena
- What our technicians bring
- A short glossary
- Cost factors for panic bar installation service
- Why Altadena customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- How we work on every job
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Altadena
- Panic Bar Installation near Altadena
- Panic Bar Installation in Altadena: frequently asked questions
About our panic bar installation service
Installing panic bars, push bars and crash bars for emergency exits. A panic bar lets anyone open an exit door by pushing a horizontal bar, with no key or special knowledge, which is what building and fire codes require on many exits. We install rim, mortise and vertical-rod devices, match fire-rated doors with fire exit hardware, and add outside trim or an alarm where needed.

Every business in Altadena eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our panic bar installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Altadena
Our commercial customers in Altadena include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Altadena.
When you need panic bar installation service
People in Altadena usually call us for panic bar installation service in situations like these:
- An inspector required panic hardware on an exit
- An exit is secured with a deadbolt or padlock
- You are opening an assembly or retail space
- A back door needs to lock from outside but open freely from inside
Panic Bar Installation across Altadena
Located in Los Angeles County, Altadena is an unincorporated community within our San Gabriel Valley service area. We cover every part of Altadena, including the Lake Avenue corridor, the Christmas Tree Lane area, the Loma Alta area, and the Lincoln Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 91001.
As Altadena rebuilds after the January 2025 Eaton Fire, new-construction lock installation, construction-site lock boxes and rekeying for rebuilt and temporary homes are common needs alongside everyday service.
If you are out and about near Christmas Tree Lane, Farnsworth Park, Loma Alta Park, Eaton Canyon, or the Lake Avenue business district, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Altadena follows I-210, Lake Avenue, Fair Oaks Avenue, Altadena Drive, Woodbury Road, and Lincoln Avenue. You get a realistic arrival estimate when you call.
Our panic bar installation process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Altadena
- A closer has failed and the front door slams hard enough to rattle the glass.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Cost factors for panic bar installation service
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Altadena customers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Consider keypad or card access for doors with frequent staff turnover.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Altadena
Customers who need panic bar installation service often ask about these as well. Each can usually be handled in the same visit to Altadena.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- Apartment Building Locksmith
Common area locks, unit rekeys, mailbox locks, access control, gate locks and emergency exit hardware.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
Panic Bar Installation near Altadena
We provide the same panic bar installation service in the communities around Altadena. See the main panic bar installation page or the full list of service areas.
- Panic Bar Installation in Pasadena
- Panic Bar Installation in La Cañada Flintridge
- Panic Bar Installation in Sierra Madre
- Panic Bar Installation in San Marino
- Panic Bar Installation in South Pasadena
- Panic Bar Installation in Arcadia
- Panic Bar Installation in Alhambra
- Panic Bar Installation in San Gabriel
- Panic Bar Installation in Temple City
- Panic Bar Installation in Glendale
- Panic Bar Installation in Monrovia
- Panic Bar Installation in Rosemead
Panic Bar Installation in Altadena: frequently asked questions
When is a panic bar required?
Model codes used in California generally require panic hardware on exit doors serving assembly and educational occupancies with 50 or more occupants and certain hazardous areas. Your local fire marshal or building official makes the final determination for your space.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Can you work outside our business hours in Altadena?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Which parts of Altadena do you serve?
All of Altadena, including the Lake Avenue corridor, the Christmas Tree Lane area, the Loma Alta area, and the Lincoln Avenue corridor, and addresses in ZIP code 91001.
Is there a travel charge for Altadena?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Altadena, so you know the cost in advance.
Can you make car keys in Altadena?
Yes. We cut and program car keys on site anywhere in Altadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
