Quick answer
The 1993 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Big Daddy Car Key Replacement makes 1993 Ford Explorer keys on site in Arcadia, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 1993 Ford Explorer
- Typical key
- Traditional metal key
- Transponder chip
- No
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 1993 Ford Explorer use?
- How we make a 1993 Ford Explorer key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 1993 Ford Explorer key replacement across Arcadia
- Getting a 1993 Ford Explorer key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 1993 Ford Explorer key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Arcadia choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Explorer years
- Other Ford models
- Related automotive locksmith services in Arcadia
- 1993 Ford Explorer keys near Arcadia
- 1993 Ford Explorer key replacement in Arcadia: frequently asked questions
What kind of key does a 1993 Ford Explorer use?
The 1993 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 1993 Ford Explorer key
For the 1993 Ford Explorer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 1993 model year. For other years, see the Ford Explorer key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Arcadia:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ford right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
1993 Ford Explorer key replacement across Arcadia
Arcadia is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Our Ford key replacement service reaches all of Arcadia, including the Upper Rancho, the Lower Rancho, Santa Anita Oaks, the Baldwin Avenue corridor, and Downtown Arcadia, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91006 and 91007 ZIP codes.
Arcadia is known for large custom homes, many newly built, where owners want multi-point locks, high-security cylinders, safes and smart entry systems installed correctly the first time.
Whether you are at home, at work, or stuck near Santa Anita Park, The Shops at Santa Anita, the Los Angeles County Arboretum, or Arcadia County Park, tell the dispatcher the nearest landmark and we will find you. Arcadia is served by I-210, Huntington Drive, Baldwin Avenue, Santa Anita Avenue, Foothill Boulevard, and Duarte Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 1993 Ford Explorer key made, step by step
Call with the year, make and model
Tell us you need a key for a 1993 Ford Explorer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 1993 Ford Explorer key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- Immobilizer
- The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The ignition will not turn and the key will not come out.
- A hardware-store copy opens the door but the engine will not start.
- A used car was sold with one worn key and no spare.
- The key is locked in the trunk and the trunk release is disabled.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
Why drivers in Arcadia choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arcadia.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Looking after your Ford key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
Other Ford Explorer years
- 2026 Explorer
- 2025 Explorer
- 2024 Explorer
- 2023 Explorer
- 2022 Explorer
- 2021 Explorer
- 2020 Explorer
- 2019 Explorer
- 2018 Explorer
- 2017 Explorer
- 2016 Explorer
- 2015 Explorer
- 2014 Explorer
- 2013 Explorer
- 2012 Explorer
- 2011 Explorer
- 2010 Explorer
- 2009 Explorer
- 2008 Explorer
- 2007 Explorer
- 2006 Explorer
- 2005 Explorer
- 2004 Explorer
- 2003 Explorer
- 2002 Explorer
- 2001 Explorer
- 2000 Explorer
- 1999 Explorer
- 1998 Explorer
- 1997 Explorer
- 1996 Explorer
- 1995 Explorer
- 1994 Explorer
- 1992 Explorer
- 1991 Explorer
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in Arcadia
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Ignition Key Replacement
Making replacement keys for vehicle ignitions.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Push-to-Start Key Programming
Programming proximity keys for push-button ignition vehicles.
- Smart Key Replacement
Replacing push-to-start smart keys and proximity keys.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Scooter Key Replacement
Making replacement keys for scooters and small vehicles.
1993 Ford Explorer keys near Arcadia
We make 1993 Ford Explorer keys in the communities around Arcadia as well. See the main 1993 Ford Explorer key replacement page or the Arcadia locksmith page.
- 1993 Ford Explorer keys in Sierra Madre
- 1993 Ford Explorer keys in Monrovia
- 1993 Ford Explorer keys in Temple City
- 1993 Ford Explorer keys in Duarte
- 1993 Ford Explorer keys in Bradbury
- 1993 Ford Explorer keys in San Marino
- 1993 Ford Explorer keys in Rosemead
- 1993 Ford Explorer keys in El Monte
- 1993 Ford Explorer keys in San Gabriel
- 1993 Ford Explorer keys in Baldwin Park
- 1993 Ford Explorer keys in Alhambra
- 1993 Ford Explorer keys in South El Monte
1993 Ford Explorer key replacement in Arcadia: frequently asked questions
Does a 1993 Ford Explorer key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 1993 Ford Explorer key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Ford key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Will my lost 1993 Ford Explorer key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
What do you need from me to make a 1993 Ford Explorer key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you make a 1993 Ford Explorer key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
How many keys should I have for my 1993 Ford Explorer?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Is a locksmith-made Ford key as good as a dealer key?
Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.
Do you have a locksmith shop in Arcadia?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Arcadia and the rest of the San Gabriel Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Arcadia?
It depends on where the nearest technician is and on traffic along I-210, Huntington Drive, or Baldwin Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
