Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1997 Ford Explorer Key Replacement in Arcadia, CA

Lost or broken 1997 Ford Explorer key? Big Daddy Car Key Replacement cuts and programs a new one at your vehicle in Arcadia, 24 hours a day. No tow and no dealer appointment.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1997 Ford Explorer Key Replacement in Arcadia, CA by Big Daddy Car Key Replacement

Quick answer

The 1997 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Ford Explorer keys on site in Arcadia, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1997 Ford Explorer
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1997 Ford Explorer use?

The 1997 Ford Explorer typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

1997 Ford Explorer key replacement in Arcadia
Traditional metal key for a 1997 Ford Explorer, made on site in Arcadia.

How we make a 1997 Ford Explorer key

For the 1997 Ford Explorer we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 1997 model year. For other years, see the Ford Explorer key replacement overview, or browse all Ford models.

How Ford key and immobilizer systems work

Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.

Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.

Common Ford key and lock problems

These are the issues we see most often on Ford vehicles in Arcadia:

  • A rapidly flashing theft light and no start after using an unprogrammed copy
  • Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
  • Remote-head keys whose buttons wear through
  • Door keypad codes that owners have forgotten or never learned

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Ford right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

1997 Ford Explorer key replacement across Arcadia

Arcadia is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Customers anywhere in Arcadia, including the Upper Rancho, the Lower Rancho, Santa Anita Oaks, the Baldwin Avenue corridor, and Downtown Arcadia, can have a mobile technician sent directly to them. We serve the 91006 and 91007 ZIP codes.

Arcadia is known for large custom homes, many newly built, where owners want multi-point locks, high-security cylinders, safes and smart entry systems installed correctly the first time.

Whether you are at home, at work, or stuck near Santa Anita Park, The Shops at Santa Anita, the Los Angeles County Arboretum, or Arcadia County Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Arcadia by I-210, Huntington Drive, Baldwin Avenue, Santa Anita Avenue, Foothill Boulevard, and Duarte Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

Getting a 1997 Ford Explorer key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1997 Ford Explorer, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1997 Ford Explorer key in Arcadia
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ford key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1997 Ford Explorer key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.

Situations we are called to most often

  • The ignition will not turn and the key will not come out.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The key fob went through the washing machine.
  • The key is locked in the trunk and the trunk release is disabled.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Arcadia choose Big Daddy

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arcadia.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Ford car key service in Arcadia
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ford key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

Other Ford Explorer years

Other Ford models

1997 Ford Explorer keys near Arcadia

We make 1997 Ford Explorer keys in the communities around Arcadia as well. See the main 1997 Ford Explorer key replacement page or the Arcadia locksmith page.

1997 Ford Explorer key replacement in Arcadia: frequently asked questions

Does a 1997 Ford Explorer key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 1997 Ford Explorer key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Ford key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

I have only one Ford key. Can I program a second one myself?

No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.

Why does programming a Ford key take ten minutes of waiting?

PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.

What do you need from me to make a 1997 Ford Explorer key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Does car insurance cover a replacement Ford key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

How many keys should I have for my 1997 Ford Explorer?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Can you make a 1997 Ford Explorer key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Can you program a key I bought online for my 1997 Ford Explorer?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Is there a travel charge for Arcadia?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Arcadia, so you know the cost in advance.

Which parts of Arcadia do you serve?

All of Arcadia, including the Upper Rancho, the Lower Rancho, Santa Anita Oaks, and the Baldwin Avenue corridor, and addresses in ZIP codes 91006 and 91007.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith