Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Deadbolt Installation in Arleta, CA

Big Daddy Car Key Replacement provides deadbolt installation service throughout Arleta. We come to you at any hour with the tools and parts to finish the job on site. Installing single-cylinder, double-cylinder, high-security or smart deadbolts.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Deadbolt Installation in Arleta, CA by Big Daddy Car Key Replacement

Quick answer

Deadbolt Installation: Installing single-cylinder, double-cylinder, high-security or smart deadbolts. Big Daddy Car Key Replacement provides deadbolt installation service in Arleta as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Deadbolt Installation
Area
Arleta, Los Angeles County, CA (91331)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Residential Locksmith Services
Phone
(562) 550-7206
On this page

What deadbolt installation means

Installing single-cylinder, double-cylinder, high-security or smart deadbolts. A deadbolt is the lock that actually resists force, because its bolt cannot be pushed back with a card or pried like a spring latch. We install single-cylinder deadbolts with an inside thumbturn, double-cylinder models where glass is near the lock, and keypad or smart versions, each with a reinforced strike anchored into the wall stud.

Deadbolt Installation in Arleta, CA by Big Daddy Car Key Replacement
Deadbolt Installation in Arleta: mobile service, carried out at your location.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our deadbolt installation service in Arleta is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.

Customers we serve in Arleta

We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Arleta. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.

This service is part of our residential locksmith services in Arleta.

When you need deadbolt installation service

People in Arleta usually call us for deadbolt installation service in situations like these:

  • Your door only has a locking knob
  • The existing deadbolt has a short or wobbly bolt
  • There is glass within reach of the thumbturn
  • You want keyless entry on the main door

Deadbolt Installation across Arleta

Arleta is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our deadbolt installation service reaches all of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91331 ZIP code.

Arleta is mostly postwar single-family tract homes from the late 1940s and 1950s, many still carrying original knob locks and aging deadbolts that are due for a rekey or an upgrade.

People call us from all over Arleta, including the areas around Branford Park, Arleta High School, and Hansen Dam Recreation Area. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Arleta follows I-5, SR-170, Woodman Avenue, Van Nuys Boulevard, Osborne Street, and Terra Bella Street. You get a realistic arrival estimate when you call.

What happens when you call

  1. A short phone consultation

    Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.

  2. On-site inspection

    The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.

  3. Clear options and a firm price

    You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.

  4. The work is done at your door

    Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.

  5. Every lock is tested with you

    You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.

  6. Keys and advice are handed over

    You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing deadbolt installation service in Arleta, California
Our technicians work from fully equipped vans throughout Arleta.

Typical calls we receive

  • You have just closed on a house and have no idea how many keys the previous owners handed out.
  • An older parent is having trouble with a round knob and needs lever handles.
  • A back door has only a locking knob, which can be slipped or forced in seconds.
  • A handbag with house keys and a driver’s license was stolen from a car.
  • The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
  • A roommate, partner or tenant has moved out and still has a key.
  • Each door in the house takes a different key and the ring keeps growing.

What our technicians bring

Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.

Terms worth knowing

Backset
The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
Rekeying
Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
Keyed alike
Several locks set to operate with the same key.
ANSI/BHMA grade
A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
Keyway
The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Deadbolt
A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
Single and double cylinder
A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
Strike plate
The metal plate on the door frame that the latch or bolt enters when the door is closed.

What affects the cost of deadbolt installation service

Smart or electronic features
Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
Door preparation
Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
Rekey, repair or replace
Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
Condition of door and frame
A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
Scheduling
Planned daytime appointments are typically priced lower than urgent late-night calls.
Grade and brand of hardware
A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Arleta. The technician confirms the figure before starting.

Why call Big Daddy Car Key Replacement

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Residential locksmith work in Arleta, CA
Residential Locksmith Services from Big Daddy Car Key Replacement.

Advice worth knowing

  • Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
  • Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
  • Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
  • If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
  • Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
  • Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
  • Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
  • When buying new hardware, check that the ANSI/BHMA grade is printed on the package.

Doing it yourself versus calling a professional

Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Questions to ask any locksmith

  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.

Before you call (562) 550-7206

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need deadbolt installation service often ask about these as well. Each can usually be handled in the same visit to Arleta.

  • High-Security Lock Installation

    Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.

  • Lock Repair

    Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.

  • Lock Installation

    Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.

  • Lock Rekey

    Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.

  • Security Door Lock Service

    Installing, repairing and rekeying locks for security screen doors and metal security doors.

  • Tenant Move-Out Rekey

    Rekeying locks after tenants move out to protect property owners and new occupants.

  • Door Knob Lock Installation

    Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.

  • Sliding Door Lock Repair

    Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.

  • Change Locks

    Swapping out the locks on your doors for new ones, with new keys, in one visit.

  • Residential Locksmith

    Complete lock and key service for houses, apartments, condos and rental properties.

  • Storefront Lock Repair

    Repairing locks on glass storefront doors, aluminum doors and commercial entryways.

  • Key Fob Replacement

    Replacing remote key fobs for cars, trucks, SUVs and vans.

  • Ignition Repair

    Repairing ignition cylinders that are stuck, worn or will not turn.

  • Broken Key Extraction

    Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.

  • Automotive Locksmith

    Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.

Deadbolt Installation near Arleta

We provide the same deadbolt installation service in the communities around Arleta. See the main deadbolt installation page or the full list of service areas.

Deadbolt Installation in Arleta: frequently asked questions

Should I get a single or double cylinder deadbolt?

Single-cylinder deadbolts use a key outside and a thumbturn inside and suit most doors. Double-cylinder deadbolts need a key on both sides, which helps when glass is nearby but can slow an emergency exit, so check local code and keep a key close.

What is the most secure type of front door lock?

A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.

Should I rekey or replace the locks in my Arleta home?

Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.

What lock brands do you work with?

We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.

Do you need to see proof that I live here?

For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.

Can you install locks I bought myself?

Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.

How long does a typical residential job take?

A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.

Can all my doors use the same key?

Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.

Are you open 24 hours in Arleta?

Yes. We take calls and dispatch to Arleta 24 hours a day, including weekends and holidays.

Do you have a locksmith shop in Arleta?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Arleta and the rest of the San Fernando Valley area. All work is done at your location.

Which parts of Arleta do you serve?

All of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, and addresses in ZIP code 91331.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith