Quick answer
Commercial Smart Lock Installation: Installing electronic and app-controlled locks for businesses. Big Daddy Car Key Replacement provides commercial smart lock installation service in Beverly Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Smart Lock Installation
- Area
- Beverly Hills, Los Angeles County, CA (90210, 90211, 90212)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What commercial smart lock installation means
- Who uses this service
- Signs you need commercial smart lock installation service
- Commercial Smart Lock Installation across Beverly Hills
- What happens when you call
- Common situations in Beverly Hills
- Equipment and hardware on the van
- A short glossary
- How commercial smart lock installation service is priced
- Why Beverly Hills customers choose Big Daddy
- Advice worth knowing
- Doing it yourself versus calling a professional
- How we work on every job
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Beverly Hills
- Commercial Smart Lock Installation near Beverly Hills
- Commercial Smart Lock Installation in Beverly Hills: frequently asked questions
What commercial smart lock installation means
Installing electronic and app-controlled locks for businesses. Commercial smart locks put access control inside the lock itself: a Grade 1 lever or deadbolt with a keypad or card reader, managed from an app or cloud dashboard, with no wiring to the door. They suit small offices, clinics and retail back rooms that want schedules and audit trails without a full wired system.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our commercial smart lock installation service in Beverly Hills takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Beverly Hills range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Beverly Hills.
Signs you need commercial smart lock installation service
If any of the following sounds familiar, commercial smart lock installation service is likely what you need:
- You want access control on a few doors only
- Running wire to the door is impractical
- You need user schedules and entry logs
- Staff codes must be easy to add and remove
Commercial Smart Lock Installation across Beverly Hills
Beverly Hills is an incorporated city in Los Angeles County, part of the Westside area we cover every day. Our commercial smart lock installation service reaches all of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, Beverly Hills Gateway, and the area south of Wilshire, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 90210, 90211, and 90212.
Beverly Hills combines landmark estates, luxury retail and medical and office towers, so the work leans toward high-security and restricted keyways, safes, commercial hardware and keys for European vehicles.
If you are out and about near Rodeo Drive, Beverly Hills City Hall, Beverly Gardens Park, Greystone Mansion, or The Beverly Hills Hotel, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Beverly Hills follows Santa Monica Boulevard, Wilshire Boulevard, Sunset Boulevard, Olympic Boulevard, Beverly Drive, and Coldwater Canyon Drive. You get a realistic arrival estimate when you call.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Beverly Hills
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- A homeowner wants to let a contractor in while at work.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Audit trail
- A stored record of which credential opened a door and when.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
How commercial smart lock installation service is priced
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Beverly Hills. The technician confirms the figure before starting.
Why Beverly Hills customers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Beverly Hills.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Give each person their own code or credential so access can be removed individually.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Turn on two-factor authentication for any account that can unlock your door.
- Keep firmware up to date. Updates often fix security issues.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Beverly Hills
Customers who need commercial smart lock installation service often ask about these as well. Each can usually be handled in the same visit to Beverly Hills.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
Commercial Smart Lock Installation near Beverly Hills
We provide the same commercial smart lock installation service in the communities around Beverly Hills. See the main commercial smart lock installation page or the full list of service areas.
- Commercial Smart Lock Installation in West Hollywood
- Commercial Smart Lock Installation in Culver City
- Commercial Smart Lock Installation in Studio City
- Commercial Smart Lock Installation in Ladera Heights
- Commercial Smart Lock Installation in Sherman Oaks
- Commercial Smart Lock Installation in Toluca Lake
- Commercial Smart Lock Installation in View Park–Windsor Hills
- Commercial Smart Lock Installation in Valley Village
- Commercial Smart Lock Installation in Santa Monica
- Commercial Smart Lock Installation in Marina del Rey
- Commercial Smart Lock Installation in North Hollywood
- Commercial Smart Lock Installation in Valley Glen
Commercial Smart Lock Installation in Beverly Hills: frequently asked questions
Are residential smart locks suitable for a business?
Generally not. Business doors need Grade 1 hardware rated for heavy use, fire and ADA compliance where applicable, and user management built for many people.
Which smart lock is best for a home in Beverly Hills?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Is there a travel charge for Beverly Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Beverly Hills, so you know the cost in advance.
Which parts of Beverly Hills do you serve?
All of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, and Beverly Hills Gateway, and addresses in ZIP codes 90210, 90211, and 90212.
Can you make car keys in Beverly Hills?
Yes. We cut and program car keys on site anywhere in Beverly Hills, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
