Quick answer
Door Hardware Repair: Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. Big Daddy Car Key Replacement provides door hardware repair service in Beverly Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Hardware Repair
- Area
- Beverly Hills, Los Angeles County, CA (90210, 90211, 90212)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- What door hardware repair means
- Who uses this service
- When you need door hardware repair service
- Door Hardware Repair across Beverly Hills
- Our door hardware repair process, step by step
- Situations we handle regularly
- What our technicians bring
- Terms worth knowing
- What affects the cost of door hardware repair service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in Beverly Hills
- Door Hardware Repair near Beverly Hills
- Door Hardware Repair in Beverly Hills: frequently asked questions
What door hardware repair means
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. A door that will not latch or lock is rarely a lock problem alone. Hinges loosen, frames shift and weatherstripping swells, and the hardware goes out of line. We look at the whole opening, fix the cause, and leave the door closing with a push and locking with two fingers.

If you have to lift, push or slam a door to get it to lock, something is out of line. For door hardware repair service in Beverly Hills, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.
Who uses this service
Door hardware calls in Beverly Hills come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
Our full list of locksmith services shows everything we offer, and the Beverly Hills locksmith page covers local details.
When you need door hardware repair service
If any of the following sounds familiar, door hardware repair service is likely what you need:
- The door must be slammed or lifted to latch
- The deadbolt only works if you push on the door
- The door rubs the frame or floor
- Hardware is loose, rattling or misaligned
Door Hardware Repair across Beverly Hills
Beverly Hills is an incorporated city in Los Angeles County, part of the Westside area we cover every day. We cover every part of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, Beverly Hills Gateway, and the area south of Wilshire. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90210, 90211, and 90212.
Beverly Hills combines landmark estates, luxury retail and medical and office towers, so the work leans toward high-security and restricted keyways, safes, commercial hardware and keys for European vehicles.
People call us from all over Beverly Hills, including the areas around Rodeo Drive, Beverly Hills City Hall, Beverly Gardens Park, Greystone Mansion, and The Beverly Hills Hotel. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Beverly Hills follows Santa Monica Boulevard, Wilshire Boulevard, Sunset Boulevard, Olympic Boulevard, Beverly Drive, and Coldwater Canyon Drive. You get a realistic arrival estimate when you call.
Our door hardware repair process, step by step
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- A latch has jammed and someone is stuck in a room.
- The top corner of the door rubs the frame and the paint is wearing through.
- The deadbolt only turns if you pull the door hard toward you.
- The back door swings outward and its latch is visible through the gap.
- A previous break-in left the jamb cracked around the strike.
- The door drifts open by itself because the latch no longer catches.
What our technicians bring
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Terms worth knowing
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
What affects the cost of door hardware repair service
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Beverly Hills. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Beverly Hills.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
Why this is a job for a locksmith
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Beverly Hills
Customers who need door hardware repair service often ask about these as well. Each can usually be handled in the same visit to Beverly Hills.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Door Chain Installation
Installing door chains or secondary security locks.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
Door Hardware Repair near Beverly Hills
We provide the same door hardware repair service in the communities around Beverly Hills. See the main door hardware repair page or the full list of service areas.
- Door Hardware Repair in West Hollywood
- Door Hardware Repair in Culver City
- Door Hardware Repair in Studio City
- Door Hardware Repair in Ladera Heights
- Door Hardware Repair in Sherman Oaks
- Door Hardware Repair in Toluca Lake
- Door Hardware Repair in View Park–Windsor Hills
- Door Hardware Repair in Valley Village
- Door Hardware Repair in Santa Monica
- Door Hardware Repair in Marina del Rey
- Door Hardware Repair in North Hollywood
- Door Hardware Repair in Valley Glen
Door Hardware Repair in Beverly Hills: frequently asked questions
Why does my door not latch anymore?
The latch and strike plate have moved out of alignment, most often because hinge screws have loosened and the door has dropped. Tightening or shimming the hinges and adjusting the strike restores the latch.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Why do I have to push my door to lock it in Beverly Hills?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
How long does it take a locksmith to reach me in Beverly Hills?
It depends on where the nearest technician is and on traffic along Santa Monica Boulevard, Wilshire Boulevard, or Sunset Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Beverly Hills do you serve?
All of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, and Beverly Hills Gateway, and addresses in ZIP codes 90210, 90211, and 90212.
Is there a travel charge for Beverly Hills?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Beverly Hills, so you know the cost in advance.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
