Quick answer
Door Viewer & Peephole Installation: Installing peepholes or door viewers for added safety. Big Daddy Car Key Replacement provides peephole installation service in Beverly Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Viewer & Peephole Installation
- Area
- Beverly Hills, Los Angeles County, CA (90210, 90211, 90212)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- What door viewer & peephole installation means
- Who we help in Beverly Hills
- Reasons to call for peephole installation service
- Door Viewer & Peephole Installation across Beverly Hills
- How our peephole installation service works
- Typical calls we receive
- Tools, parts and hardware we carry
- Trade terms explained
- How peephole installation service is priced
- What you can expect from us
- Advice worth knowing
- Professional service compared with doing it yourself
- What we commit to
- Choosing a locksmith: a short checklist
- What to have ready when you call
- Once the work is done
- Related locksmith services in Beverly Hills
- Door Viewer & Peephole Installation near Beverly Hills
- Door Viewer & Peephole Installation in Beverly Hills: frequently asked questions
What door viewer & peephole installation means
Installing peepholes or door viewers for added safety. A door viewer lets you see who is outside without opening the door. We install wide-angle viewers at the right height for the household, including a second lower viewer for children or wheelchair users, and can fit digital viewers that show the image on a small inside screen.

If you have to lift, push or slam a door to get it to lock, something is out of line. For peephole installation service in Beverly Hills, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.
Who we help in Beverly Hills
Door hardware calls in Beverly Hills come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in Beverly Hills.
Reasons to call for peephole installation service
These are the most common reasons customers in Beverly Hills ask for peephole installation service:
- Your front door has no way to see out
- The existing peephole is cloudy or too high
- A household member uses a wheelchair
- You want a wider field of view
Door Viewer & Peephole Installation across Beverly Hills
Beverly Hills is an incorporated city in Los Angeles County, part of the Westside area we cover every day. We cover every part of Beverly Hills, including The Flats, Trousdale Estates, the Golden Triangle, Beverly Hills Gateway, and the area south of Wilshire. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 90210, 90211, and 90212.
Beverly Hills combines landmark estates, luxury retail and medical and office towers, so the work leans toward high-security and restricted keyways, safes, commercial hardware and keys for European vehicles.
Whether you are at home, at work, or stuck near Rodeo Drive, Beverly Hills City Hall, Beverly Gardens Park, Greystone Mansion, or The Beverly Hills Hotel, tell the dispatcher the nearest landmark and we will find you. Depending on where the closest technician is, the drive into Beverly Hills follows Santa Monica Boulevard, Wilshire Boulevard, Sunset Boulevard, Olympic Boulevard, Beverly Drive, and Coldwater Canyon Drive. You get a realistic arrival estimate when you call.
How our peephole installation service works
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A previous break-in left the jamb cracked around the strike.
- The top corner of the door rubs the frame and the paint is wearing through.
- A latch has jammed and someone is stuck in a room.
- The back door swings outward and its latch is visible through the gap.
- The door drifts open by itself because the latch no longer catches.
- The deadbolt only turns if you pull the door hard toward you.
Tools, parts and hardware we carry
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Trade terms explained
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
How peephole installation service is priced
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Beverly Hills. The technician confirms the figure before starting.
What you can expect from us
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Beverly Hills.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Advice worth knowing
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
Professional service compared with doing it yourself
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Beverly Hills
Customers who need peephole installation service often ask about these as well. Each can usually be handled in the same visit to Beverly Hills.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
Door Viewer & Peephole Installation near Beverly Hills
We provide the same peephole installation service in the communities around Beverly Hills. See the main door viewer & peephole installation page or the full list of service areas.
- Door Viewer & Peephole Installation in West Hollywood
- Door Viewer & Peephole Installation in Culver City
- Door Viewer & Peephole Installation in Studio City
- Door Viewer & Peephole Installation in Ladera Heights
- Door Viewer & Peephole Installation in Sherman Oaks
- Door Viewer & Peephole Installation in Toluca Lake
- Door Viewer & Peephole Installation in View Park–Windsor Hills
- Door Viewer & Peephole Installation in Valley Village
- Door Viewer & Peephole Installation in Santa Monica
- Door Viewer & Peephole Installation in Marina del Rey
- Door Viewer & Peephole Installation in North Hollywood
- Door Viewer & Peephole Installation in Valley Glen
Door Viewer & Peephole Installation in Beverly Hills: frequently asked questions
How high should a peephole be installed?
Standard height is around 58 to 60 inches from the floor, adjusted to the people who use the door. A second viewer around 43 inches suits children and seated users.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Why do I have to push my door to lock it in Beverly Hills?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Do you have a locksmith shop in Beverly Hills?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Beverly Hills and the rest of the Westside area. All work is done at your location.
How long does it take a locksmith to reach me in Beverly Hills?
It depends on where the nearest technician is and on traffic along Santa Monica Boulevard, Wilshire Boulevard, or Sunset Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Can you make car keys in Beverly Hills?
Yes. We cut and program car keys on site anywhere in Beverly Hills, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
