Quick answer
Access Code Programming: Adding, removing or changing access codes. Big Daddy Car Key Replacement provides access code programming service in Burbank as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Code Programming
- Area
- Burbank, Los Angeles County, CA (91501, 91502, 91504, 91505, 91506)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What access code programming involves
- Who we help in Burbank
- Signs you need access code programming service
- Access Code Programming across Burbank
- How our access code programming service works
- Situations we handle regularly
- Equipment and hardware on the van
- Terms worth knowing
- What affects the cost of access code programming service
- What you can expect from us
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in Burbank
- Access Code Programming near Burbank
- Access Code Programming in Burbank: frequently asked questions
What access code programming involves
Adding, removing or changing access codes. Good code management keeps an electronic lock secure. We add and delete user codes, change master and programming codes, set passage mode and auto-relock, and document the settings for you. For businesses we program codes per person so the audit trail means something.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our access code programming service in Burbank takes care of each part and shows you how to use it.
Who we help in Burbank
Electronic lock and access control customers in Burbank range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Burbank.
Signs you need access code programming service
If any of the following sounds familiar, access code programming service is likely what you need:
- An employee or tenant has left
- The master code was shared too widely
- New users need codes today
- You need codes that expire automatically
Access Code Programming across Burbank
Burbank is an incorporated city in Los Angeles County, part of the Burbank, Glendale & Foothills area we cover every day. We cover every part of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, Downtown Burbank, and the Burbank Hills. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91501, 91502, 91504, 91505, and 91506 ZIP codes.
Burbank blends studio lots and media offices with tidy 1930s-to-1950s bungalows and hillside homes, so production-office master keys and vintage residential hardware are both familiar work.
If you are out and about near Warner Bros. Studios, Walt Disney Studios, Hollywood Burbank Airport, Burbank Town Center, or the Empire Center, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Burbank by I-5, SR-134, Olive Avenue, Magnolia Boulevard, Burbank Boulevard, and Victory Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our access code programming service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
What affects the cost of access code programming service
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Burbank. The technician confirms the figure before starting.
What you can expect from us
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Burbank.

Practical advice from our locksmiths
- Delete factory default codes on the day of installation.
- Give each person their own code or credential so access can be removed individually.
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Keep the mechanical override key somewhere accessible outside the locked area.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Burbank
Customers who need access code programming service often ask about these as well. Each can usually be handled in the same visit to Burbank.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
Access Code Programming near Burbank
We provide the same access code programming service in the communities around Burbank. See the main access code programming page or the full list of service areas.
- Access Code Programming in Toluca Lake
- Access Code Programming in Glendale
- Access Code Programming in North Hollywood
- Access Code Programming in Sun Valley
- Access Code Programming in Valley Village
- Access Code Programming in Studio City
- Access Code Programming in La Cañada Flintridge
- Access Code Programming in Valley Glen
- Access Code Programming in West Hollywood
- Access Code Programming in Lake View Terrace
- Access Code Programming in Van Nuys
- Access Code Programming in Arleta
Access Code Programming in Burbank: frequently asked questions
How often should door codes be changed?
Delete a person’s code as soon as they no longer need access, and change shared codes every few months. Individual codes that can be removed one at a time are better than one code for everyone.
Which smart lock is best for a home in Burbank?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Are you open 24 hours in Burbank?
Yes. We take calls and dispatch to Burbank 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Burbank?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Burbank and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
Is there a travel charge for Burbank?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Burbank, so you know the cost in advance.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
