Quick answer
Key Card Access Systems: Installing card reader systems for controlled entry. Big Daddy Car Key Replacement provides key card access system service in Burbank as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Key Card Access Systems
- Area
- Burbank, Los Angeles County, CA (91501, 91502, 91504, 91505, 91506)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What key card access systems involves
- Who we help in Burbank
- Reasons to call for key card access system service
- Key Card Access Systems across Burbank
- How our key card access system service works
- Common situations in Burbank
- Tools, parts and hardware we carry
- Trade terms explained
- What affects the cost of key card access system service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- How we work on every job
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Burbank
- Key Card Access Systems near Burbank
- Key Card Access Systems in Burbank: frequently asked questions
What key card access systems involves
Installing card reader systems for controlled entry. Card systems issue each person a credential that can be printed as a photo ID badge. We install readers and controllers, recommend encrypted smart-card formats over older 125 kHz proximity cards, which are easily cloned, and enroll your cards so they are ready on day one.

Electronic locks replace the question "who has a key?" with a list you control. Our key card access system service in Burbank covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who we help in Burbank
Electronic lock and access control customers in Burbank range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Burbank.
Reasons to call for key card access system service
If any of the following sounds familiar, key card access system service is likely what you need:
- Staff already wear ID badges
- You want one card for several doors
- Old proximity cards are a cloning risk
- Visitors and contractors need temporary cards
Key Card Access Systems across Burbank
Burbank is an incorporated city in Los Angeles County, part of the Burbank, Glendale & Foothills area we cover every day. We cover every part of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, Downtown Burbank, and the Burbank Hills. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91501, 91502, 91504, 91505, and 91506.
Burbank blends studio lots and media offices with tidy 1930s-to-1950s bungalows and hillside homes, so production-office master keys and vintage residential hardware are both familiar work.
People call us from all over Burbank, including the areas around Warner Bros. Studios, Walt Disney Studios, Hollywood Burbank Airport, Burbank Town Center, and the Empire Center. A landmark or cross street helps the technician reach you quickly. Burbank is served by I-5, SR-134, Olive Avenue, Magnolia Boulevard, Burbank Boulevard, and Victory Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our key card access system service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Burbank
- A short-term rental needs a new code for every guest.
- An apartment building wants to replace a shared entry key with fobs.
- Children get home from school before their parents and keep losing keys.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
- An office wants to stop rekeying each time an employee leaves.
- A smart lock reports "jammed" every evening when the door swells.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
What affects the cost of key card access system service
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Burbank. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Burbank.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Advice worth knowing
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Give each person their own code or credential so access can be removed individually.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Turn on two-factor authentication for any account that can unlock your door.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Burbank
Customers who need key card access system service often ask about these as well. Each can usually be handled in the same visit to Burbank.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
Key Card Access Systems near Burbank
We provide the same key card access system service in the communities around Burbank. See the main key card access systems page or the full list of service areas.
- Key Card Access Systems in Toluca Lake
- Key Card Access Systems in Glendale
- Key Card Access Systems in North Hollywood
- Key Card Access Systems in Sun Valley
- Key Card Access Systems in Valley Village
- Key Card Access Systems in Studio City
- Key Card Access Systems in La Cañada Flintridge
- Key Card Access Systems in Valley Glen
- Key Card Access Systems in West Hollywood
- Key Card Access Systems in Lake View Terrace
- Key Card Access Systems in Van Nuys
- Key Card Access Systems in Arleta
Key Card Access Systems in Burbank: frequently asked questions
Are key cards more secure than keys?
Yes, when encrypted cards are used. A lost card is deleted in seconds, access can be limited by door and time, and every use is logged, none of which is possible with a metal key.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Do you have a locksmith shop in Burbank?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Burbank and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
Which parts of Burbank do you serve?
All of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, and Downtown Burbank, and addresses in ZIP codes 91501, 91502, 91504, 91505, and 91506.
How long does it take a locksmith to reach me in Burbank?
It depends on where the nearest technician is and on traffic along I-5, SR-134, or Olive Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
