Quick answer
Access Control Installation: Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Big Daddy Car Key Replacement provides access control installation service in Burbank as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Control Installation
- Area
- Burbank, Los Angeles County, CA (91501, 91502, 91504, 91505, 91506)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What access control installation involves
- Who uses this service
- Signs you need access control installation service
- Access Control Installation across Burbank
- What happens when you call
- Situations we handle regularly
- Tools, parts and hardware we carry
- Terms worth knowing
- Cost factors for access control installation service
- Why Burbank customers choose Big Daddy
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- How to choose a locksmith you can trust
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Burbank
- Access Control Installation near Burbank
- Access Control Installation in Burbank: frequently asked questions
What access control installation involves
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Access control replaces keys with credentials, cards, fobs, codes or phones, managed from software. Each door gets a reader, an electric lock, a door sensor and a request-to-exit device, wired to a controller. You decide who can enter which door at what times, and see a log of every entry.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our access control installation service in Burbank takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Burbank range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Burbank.
Signs you need access control installation service
People in Burbank usually call us for access control installation service in situations like these:
- Rekeying after every staff change is costing you
- You need to know who entered and when
- Different people need different door schedules
- Several doors or sites need central management
Access Control Installation across Burbank
Located in Los Angeles County, Burbank is an incorporated city within our Burbank, Glendale & Foothills service area. We cover every part of Burbank, including Magnolia Park, the Media District, the Rancho Equestrian District, Downtown Burbank, and the Burbank Hills. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91501, 91502, 91504, 91505, and 91506.
Burbank blends studio lots and media offices with tidy 1930s-to-1950s bungalows and hillside homes, so production-office master keys and vintage residential hardware are both familiar work.
Whether you are at home, at work, or stuck near Warner Bros. Studios, Walt Disney Studios, Hollywood Burbank Airport, Burbank Town Center, or the Empire Center, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Burbank by I-5, SR-134, Olive Avenue, Magnolia Boulevard, Burbank Boulevard, and Victory Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- Children get home from school before their parents and keep losing keys.
- A business needs to know who entered the stockroom and when.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
- A smart lock reports "jammed" every evening when the door swells.
- An office wants to stop rekeying each time an employee leaves.
Tools, parts and hardware we carry
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Audit trail
- A stored record of which credential opened a door and when.
Cost factors for access control installation service
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Burbank customers choose Big Daddy
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Burbank.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.

Practical advice from our locksmiths
- Delete factory default codes on the day of installation.
- Turn on two-factor authentication for any account that can unlock your door.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Review the user list every few months and remove anyone who no longer needs access.
- Give each person their own code or credential so access can be removed individually.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep the mechanical override key somewhere accessible outside the locked area.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Burbank
Customers who need access control installation service often ask about these as well. Each can usually be handled in the same visit to Burbank.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Key Fob Access Systems
Installing and programming key fob systems.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Audit Trail Lock Systems
Installing locks that track access history.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
Access Control Installation near Burbank
We provide the same access control installation service in the communities around Burbank. See the main access control installation page or the full list of service areas.
- Access Control Installation in Toluca Lake
- Access Control Installation in Glendale
- Access Control Installation in North Hollywood
- Access Control Installation in Sun Valley
- Access Control Installation in Valley Village
- Access Control Installation in Studio City
- Access Control Installation in La Cañada Flintridge
- Access Control Installation in Valley Glen
- Access Control Installation in West Hollywood
- Access Control Installation in Lake View Terrace
- Access Control Installation in Van Nuys
- Access Control Installation in Arleta
Access Control Installation in Burbank: frequently asked questions
How does an access control system work?
A reader checks a credential with a controller, which releases an electric lock if that person is allowed through that door at that time. The event is logged, and access can be changed or revoked instantly in software.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Which smart lock is best for a home in Burbank?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Is there a travel charge for Burbank?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Burbank, so you know the cost in advance.
Are you open 24 hours in Burbank?
Yes. We take calls and dispatch to Burbank 24 hours a day, including weekends and holidays.
Do you have a locksmith shop in Burbank?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Burbank and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
