Quick answer
Access Control Installation: Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Big Daddy Car Key Replacement provides access control installation service in Glendale as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Access Control Installation
- Area
- Glendale, Los Angeles County, CA (91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What access control installation involves
- Who we help in Glendale
- Reasons to call for access control installation service
- Access Control Installation across Glendale
- Our access control installation process, step by step
- Common situations in Glendale
- Equipment and hardware on the van
- Trade terms explained
- How access control installation service is priced
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- What we commit to
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Glendale
- Access Control Installation near Glendale
- Access Control Installation in Glendale: frequently asked questions
What access control installation involves
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities. Access control replaces keys with credentials, cards, fobs, codes or phones, managed from software. Each door gets a reader, an electric lock, a door sensor and a request-to-exit device, wired to a controller. You decide who can enter which door at what times, and see a log of every entry.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our access control installation service in Glendale takes care of each part and shows you how to use it.
Who we help in Glendale
Electronic lock and access control customers in Glendale range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Glendale.
Reasons to call for access control installation service
People in Glendale usually call us for access control installation service in situations like these:
- Rekeying after every staff change is costing you
- You need to know who entered and when
- Different people need different door schedules
- Several doors or sites need central management
Access Control Installation across Glendale
Glendale is an incorporated city in Los Angeles County, part of the Burbank, Glendale & Foothills area we cover every day. We cover every part of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, Verdugo Woodlands, Montrose, Sparr Heights, Glenoaks Canyon, and Chevy Chase Canyon. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208.
Glendale is one of the county’s largest cities, with high-rise offices and condos downtown, thousands of apartment units, and historic Spanish and Tudor homes in the hills, all with very different lock needs.
People call us from all over Glendale, including the areas around The Americana at Brand, Glendale Galleria, Brand Library & Park, the Alex Theatre, and Glendale Community College. A landmark or cross street helps the technician reach you quickly. Glendale is served by SR-134, SR-2, I-5, Brand Boulevard, Colorado Street, and Glenoaks Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our access control installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Glendale
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- An apartment building wants to replace a shared entry key with fobs.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Trade terms explained
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
How access control installation service is priced
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Glendale. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Glendale.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Give each person their own code or credential so access can be removed individually.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep firmware up to date. Updates often fix security issues.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Glendale
Customers who need access control installation service often ask about these as well. Each can usually be handled in the same visit to Glendale.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Audit Trail Lock Systems
Installing locks that track access history.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
Access Control Installation near Glendale
We provide the same access control installation service in the communities around Glendale. See the main access control installation page or the full list of service areas.
- Access Control Installation in Burbank
- Access Control Installation in La Cañada Flintridge
- Access Control Installation in Toluca Lake
- Access Control Installation in South Pasadena
- Access Control Installation in Pasadena
- Access Control Installation in West Hollywood
- Access Control Installation in Studio City
- Access Control Installation in Altadena
- Access Control Installation in North Hollywood
- Access Control Installation in Alhambra
- Access Control Installation in Valley Village
- Access Control Installation in Sun Valley
Access Control Installation in Glendale: frequently asked questions
How does an access control system work?
A reader checks a credential with a controller, which releases an electric lock if that person is allowed through that door at that time. The event is logged, and access can be changed or revoked instantly in software.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Which smart lock is best for a home in Glendale?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can you make car keys in Glendale?
Yes. We cut and program car keys on site anywhere in Glendale, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Glendale?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Glendale, so you know the cost in advance.
Do you have a locksmith shop in Glendale?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendale and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
