Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Chrysler Concorde Key Replacement in Compton, CA

Big Daddy Car Key Replacement makes Chrysler Concorde keys on site in Compton. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Chrysler Concorde Key Replacement in Compton, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Chrysler Concorde keys on site in Compton, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Chrysler Concorde
Model years covered
1993–2004
Service area
Compton, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Chrysler Concorde keys made and programmed on site

The Chrysler Concorde was sold in the United States for model years 1993–2004, and its key technology changed along the way. We make keys for every one of those years in Compton: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.

Chrysler Concorde key replacement in Compton
Chrysler Concorde keys are cut and programmed at the vehicle in Compton.

Chrysler Concorde key types by model year

The table shows the key most Chrysler Concorde models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Chrysler Concorde.
Model yearsTypical keyTransponder chipBlade
1993–1998Traditional metal keyNoEdge-cut
1999–2004Transponder chip keyYes on most; varies by trimEdge-cut

Choose your Chrysler Concorde year

Select a model year for the exact key type, programming method and what to expect.

Types of Chrysler Concorde keys

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds. For the Chrysler Concorde we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy. For the Chrysler Concorde we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank.

How Chrysler key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Common Chrysler key and lock problems

These are the issues we see most often on Chrysler vehicles in Compton:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Chrysler right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Chrysler Concorde key replacement across Compton

Compton is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our Chrysler key replacement service reaches all of Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 90220, 90221, and 90222.

Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.

People call us from all over Compton, including the areas around Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, and Gateway Towne Center. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Compton follows SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street. You get a realistic arrival estimate when you call.

Getting a Chrysler Concorde key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Chrysler Concorde, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Chrysler Concorde key in Compton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chrysler key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Chrysler Concorde key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.

Situations we are called to most often

  • The dash reads "key not detected" and the start button does nothing.
  • A hardware-store copy opens the door but the engine will not start.
  • The ignition will not turn and the key will not come out.
  • The key fob went through the washing machine.
  • A used car was sold with one worn key and no spare.

Why drivers in Compton choose Big Daddy

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Chrysler car key service in Compton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chrysler key

  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.

Choosing a car locksmith you can trust

  • Get an itemized receipt showing labor, parts and the business details.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.

Other Chrysler models

Chrysler Concorde keys near Compton

We make Chrysler Concorde keys in the communities around Compton as well. See the main Chrysler Concorde key replacement page or the Compton locksmith page.

Chrysler Concorde key replacement in Compton: frequently asked questions

Do I need a PIN code to program a Chrysler key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Chrysler with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Is a locksmith-made Chrysler key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Do you also repair the ignition on a Chrysler Concorde?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make a key for a Chrysler Concorde if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Will my lost Chrysler Concorde key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

How many keys should I have for my Chrysler Concorde?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Do I have to tow my Chrysler Concorde to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

How much does a Chrysler Concorde key cost?

It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.

Do you have a locksmith shop in Compton?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Compton and the rest of the Gateway Cities area. All work is done at your location.

How long does it take a locksmith to reach me in Compton?

It depends on where the nearest technician is and on traffic along SR-91, I-710, or I-105. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith