Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

1997 Chrysler Concorde Key Replacement in Compton, CA

Need a 1997 Chrysler Concorde key in Compton? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
1997 Chrysler Concorde Key Replacement in Compton, CA by Big Daddy Car Key Replacement

Quick answer

The 1997 Chrysler Concorde typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 1997 Chrysler Concorde keys on site in Compton, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
1997 Chrysler Concorde
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 1997 Chrysler Concorde use?

The 1997 Chrysler Concorde typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

1997 Chrysler Concorde key replacement in Compton
Traditional metal key for a 1997 Chrysler Concorde, made on site in Compton.

How we make a 1997 Chrysler Concorde key

For the 1997 Chrysler Concorde we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 1997 model year. For other years, see the Chrysler Concorde key replacement overview, or browse all Chrysler models.

How Chrysler key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Chrysler introduced the Sentry Key immobilizer in the late 1990s and the Fobik pod key in 2008, followed by Keyless Enter-N-Go proximity fobs. Vehicles from 2018 onward have a secure gateway that needs authorized access for programming.

Common Chrysler key and lock problems

These are the issues we see most often on Chrysler vehicles in Compton:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Chrysler right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

1997 Chrysler Concorde key replacement across Compton

Compton is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our Chrysler key replacement service reaches all of Compton, including Richland Farms, Sunny Cove, Downtown Compton, the Rosecrans corridor, and the Alameda industrial corridor, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 90220, 90221, and 90222.

Compton’s neighborhoods range from the horse properties of Richland Farms to postwar tract homes and a large warehouse corridor along Alameda, with steady demand for security upgrades and vehicle keys.

Whether you are at home, at work, or stuck near Compton/Woodley Airport, the Martin Luther King Jr. Memorial, Compton College, or Gateway Towne Center, tell the dispatcher the nearest landmark and we will find you. Compton is served by SR-91, I-710, I-105, Compton Boulevard, Rosecrans Avenue, and Alameda Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Getting a 1997 Chrysler Concorde key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 1997 Chrysler Concorde, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 1997 Chrysler Concorde key in Compton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Chrysler key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 1997 Chrysler Concorde key

Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • The key is locked in the trunk and the trunk release is disabled.
  • The dash reads "key not detected" and the start button does nothing.
  • A used car was sold with one worn key and no spare.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The key fob went through the washing machine.

Why drivers in Compton choose Big Daddy

Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Compton.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Chrysler car key service in Compton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Chrysler key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Chrysler Concorde years

Other Chrysler models

1997 Chrysler Concorde keys near Compton

We make 1997 Chrysler Concorde keys in the communities around Compton as well. See the main 1997 Chrysler Concorde key replacement page or the Compton locksmith page.

1997 Chrysler Concorde key replacement in Compton: frequently asked questions

Does a 1997 Chrysler Concorde key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 1997 Chrysler Concorde key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Chrysler key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Do I need a PIN code to program a Chrysler key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Chrysler with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Can you make a key for a 1997 Chrysler Concorde if I have lost every key?

In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.

Do I have to tow my 1997 Chrysler Concorde to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

What do you need from me to make a 1997 Chrysler Concorde key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

Do you also repair the ignition on a 1997 Chrysler Concorde?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make a 1997 Chrysler Concorde key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Which parts of Compton do you serve?

All of Compton, including Richland Farms, Sunny Cove, Downtown Compton, and the Rosecrans corridor, and addresses in ZIP codes 90220, 90221, and 90222.

How long does it take a locksmith to reach me in Compton?

It depends on where the nearest technician is and on traffic along SR-91, I-710, or I-105. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

Call Now (562) 550-7206Open 24 hours · mobile locksmith