Quick answer
Door Closer Installation: Installing hydraulic door closers on commercial doors. Big Daddy Car Key Replacement provides door closer installation service in Culver City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Closer Installation
- Area
- Culver City, Los Angeles County, CA (90230, 90232)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our door closer installation service
- Who we help in Culver City
- When you need door closer installation service
- Door Closer Installation across Culver City
- Our door closer installation process, step by step
- Situations we handle regularly
- Tools, parts and hardware we carry
- Terms worth knowing
- Cost factors for door closer installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Culver City
- Door Closer Installation near Culver City
- Door Closer Installation in Culver City: frequently asked questions
About our door closer installation service
Installing hydraulic door closers on commercial doors. A door closer controls how a door shuts so it latches every time without slamming. We size the closer to the door’s width and weight, choose regular, parallel or top-jamb mounting for the frame, and set closing force so the door meets accessibility limits on opening effort while still latching against air pressure.

Every business in Culver City eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our door closer installation service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Who we help in Culver City
Our commercial customers in Culver City include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Culver City.
When you need door closer installation service
People in Culver City usually call us for door closer installation service in situations like these:
- A door does not close or latch by itself
- A fire-rated door has no closer
- An entry door slams in the wind
- A new access-controlled door must relock every time
Door Closer Installation across Culver City
Culver City is an incorporated city in Los Angeles County, part of the Westside area we cover every day. We cover every part of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, Carlson Park, Blair Hills, and Sunkist Park. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90230 and 90232.
Culver City has become a studio and tech hub, with creative offices in the Hayden Tract, condos in Fox Hills and 1940s cottages, driving demand for access control alongside ordinary home rekeys.
If you are out and about near Sony Pictures Studios, The Culver Studios, the Culver Hotel, Baldwin Hills Scenic Overlook, or Westfield Culver City, give us that location when you call and wait somewhere safe and visible. Culver City is served by I-405, I-10, SR-90, Washington Boulevard, Culver Boulevard, and Venice Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our door closer installation process, step by step
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Terms worth knowing
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Cost factors for door closer installation service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Culver City. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Culver City.

Practical advice from our locksmiths
- Give each employee access only to the doors their job requires.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Consider keypad or card access for doors with frequent staff turnover.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Keep a written key log: who holds which key, and the date it was issued and returned.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Culver City
Customers who need door closer installation service often ask about these as well. Each can usually be handled in the same visit to Culver City.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Commercial Lock Change
Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- Mortise Lock Installation
Installing commercial mortise lock bodies, cylinders, trims and handles.
- Panic Bar Repair
Repairing panic bars that stick, fail to latch, alarm or do not open correctly.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Door Closer Installation near Culver City
We provide the same door closer installation service in the communities around Culver City. See the main door closer installation page or the full list of service areas.
- Door Closer Installation in Ladera Heights
- Door Closer Installation in View Park–Windsor Hills
- Door Closer Installation in Beverly Hills
- Door Closer Installation in Marina del Rey
- Door Closer Installation in Inglewood
- Door Closer Installation in West Hollywood
- Door Closer Installation in Santa Monica
- Door Closer Installation in El Segundo
- Door Closer Installation in Hawthorne
- Door Closer Installation in Westmont
- Door Closer Installation in Studio City
- Door Closer Installation in Athens
Door Closer Installation in Culver City: frequently asked questions
What size door closer do I need?
Closers are sized from 1 to 6 by door width, weight and exposure to wind. Many are adjustable across several sizes; we set the spring to the lowest force that reliably latches the door.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you work outside our business hours in Culver City?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Can you make car keys in Culver City?
Yes. We cut and program car keys on site anywhere in Culver City, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
How long does it take a locksmith to reach me in Culver City?
It depends on where the nearest technician is and on traffic along I-405, I-10, or SR-90. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Are you open 24 hours in Culver City?
Yes. We take calls and dispatch to Culver City 24 hours a day, including weekends and holidays.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
