Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Lock Installation in Culver City, CA

Big Daddy Car Key Replacement provides lock installation service throughout Culver City. We come to you at any hour with the tools and parts to finish the job on site. Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Lock Installation in Culver City, CA by Big Daddy Car Key Replacement

Quick answer

Lock Installation: Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. Big Daddy Car Key Replacement provides lock installation service in Culver City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Lock Installation
Area
Culver City, Los Angeles County, CA (90230, 90232)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Residential Locksmith Services
Phone
(562) 550-7206
On this page

About our lock installation service

Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors. A fresh installation means drilling and fitting a lock where there was none, or where the door is new. Accuracy matters: the cross bore, edge bore and strike must line up so the bolt throws fully without rubbing. We use a boring jig, chisel the mortises cleanly and test the door under real closing pressure.

Lock Installation in Culver City, CA by Big Daddy Car Key Replacement
Lock Installation in Culver City: mobile service, carried out at your location.

Your locks are only as good as their condition and the keys in circulation. Our lock installation service in Culver City deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.

Who uses this service

We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Culver City. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.

This service is part of our residential locksmith services in Culver City.

Reasons to call for lock installation service

People in Culver City usually call us for lock installation service in situations like these:

  • A door has a knob but no deadbolt
  • You added a home office or rental unit
  • A new or replacement door arrived without hardware
  • A garage entry or side door has no lock

Lock Installation across Culver City

Culver City is an incorporated city in Los Angeles County, part of the Westside area we cover every day. We cover every part of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, Carlson Park, Blair Hills, and Sunkist Park. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90230 and 90232.

Culver City has become a studio and tech hub, with creative offices in the Hayden Tract, condos in Fox Hills and 1940s cottages, driving demand for access control alongside ordinary home rekeys.

People call us from all over Culver City, including the areas around Sony Pictures Studios, The Culver Studios, the Culver Hotel, Baldwin Hills Scenic Overlook, and Westfield Culver City. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Culver City follows I-405, I-10, SR-90, Washington Boulevard, Culver Boulevard, and Venice Boulevard. You get a realistic arrival estimate when you call.

How our lock installation service works

  1. A short phone consultation

    Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.

  2. On-site inspection

    The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.

  3. Clear options and a firm price

    You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.

  4. The work is done at your door

    Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.

  5. Every lock is tested with you

    You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.

  6. Keys and advice are handed over

    You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing lock installation service in Culver City, California
Our technicians work from fully equipped vans throughout Culver City.

Typical calls we receive

  • The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
  • You have just closed on a house and have no idea how many keys the previous owners handed out.
  • Each door in the house takes a different key and the ring keeps growing.
  • A roommate, partner or tenant has moved out and still has a key.
  • A handbag with house keys and a driver’s license was stolen from a car.
  • An older parent is having trouble with a round knob and needs lever handles.
  • A back door has only a locking knob, which can be slipped or forced in seconds.

Equipment and hardware on the van

Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.

Terms worth knowing

Deadbolt
A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
Keyway
The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
Rekeying
Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
ANSI/BHMA grade
A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
Backset
The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
Strike plate
The metal plate on the door frame that the latch or bolt enters when the door is closed.
Keyed alike
Several locks set to operate with the same key.
Single and double cylinder
A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.

How lock installation service is priced

Grade and brand of hardware
A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
Number of locks
Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
Door preparation
Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
Condition of door and frame
A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
Smart or electronic features
Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
Rekey, repair or replace
Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Culver City. The technician confirms the figure before starting.

What you can expect from us

Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Culver City.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Residential locksmith work in Culver City, CA
Residential Locksmith Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
  • Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
  • If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
  • When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
  • Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
  • Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
  • Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
  • Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.

Doing it yourself versus calling a professional

Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.

How we work on every job

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Choosing a locksmith: a short checklist

  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

Before you call (562) 550-7206

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need lock installation service often ask about these as well. Each can usually be handled in the same visit to Culver City.

  • Condo Locksmith Service

    Lock services for condo units, shared entries, storage rooms and garage access doors.

  • Eviction Locksmith Service

    Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.

  • House Lockout

    Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.

  • Apartment Locksmith Service

    Lockouts, rekeys, lock changes and key copies for apartments and rental units.

  • Lost House Key Service

    Rekeying or replacing locks when house keys are lost or stolen.

  • Deadbolt Repair

    Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly.

  • Emergency Home Lockout

    Fast help when a homeowner or tenant is locked out of a house, apartment, condo or rental property.

  • Rekey Locks

    Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.

  • Security Door Lock Service

    Installing, repairing and rekeying locks for security screen doors and metal security doors.

  • High-Security Lock Installation

    Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.

  • Ignition Repair

    Repairing ignition cylinders that are stuck, worn or will not turn.

  • High Security Locks

    Locks engineered to resist picking, bumping, drilling and unauthorized key copying.

  • Access Control Installation

    Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.

  • Automotive Locksmith

    Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.

  • Master Key System

    Creating a key hierarchy where owners, managers and employees have different levels of access.

Lock Installation near Culver City

We provide the same lock installation service in the communities around Culver City. See the main lock installation page or the full list of service areas.

Lock Installation in Culver City: frequently asked questions

Can you install a lock on a door that has never had one?

Yes. We bore the door and frame with a jig, mortise the latch and strike, and fit the lock so it operates smoothly. This works on wood, fiberglass and most metal doors.

What is the most secure type of front door lock?

A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.

Can you install locks I bought myself?

Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.

What lock brands do you work with?

We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.

Should I rekey or replace the locks in my Culver City home?

Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.

Can all my doors use the same key?

Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.

Do you need to see proof that I live here?

For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.

How long does a typical residential job take?

A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.

How long does it take a locksmith to reach me in Culver City?

It depends on where the nearest technician is and on traffic along I-405, I-10, or SR-90. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Is there a travel charge for Culver City?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Culver City, so you know the cost in advance.

Which parts of Culver City do you serve?

All of Culver City, including Downtown Culver City, the Hayden Tract, Fox Hills, and Carlson Park, and addresses in ZIP codes 90230 and 90232.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Call Now (562) 550-7206Open 24 hours · mobile locksmith