Quick answer
Magnetic Lock Installation: Installing maglocks for controlled entry doors. Big Daddy Car Key Replacement provides magnetic lock installation service in Encino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Magnetic Lock Installation
- Area
- Encino, Los Angeles County, CA (91316, 91436)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our magnetic lock installation service
- Who uses this service
- Signs you need magnetic lock installation service
- Magnetic Lock Installation across Encino
- Our magnetic lock installation process, step by step
- Situations we handle regularly
- What our technicians bring
- Terms worth knowing
- What affects the cost of magnetic lock installation service
- Why Encino customers choose Big Daddy
- Advice worth knowing
- Why this is a job for a locksmith
- How we work on every job
- Questions to ask any locksmith
- What to have ready when you call
- Once the work is done
- Related locksmith services in Encino
- Magnetic Lock Installation near Encino
- Magnetic Lock Installation in Encino: frequently asked questions
About our magnetic lock installation service
Installing maglocks for controlled entry doors. A maglock holds a door with an electromagnet, commonly rated at 600 or 1,200 pounds, and releases when power is cut. Because it is fail-safe, code requires reliable ways to get out: typically a motion sensor and a push-to-exit button, plus release on fire alarm. We install maglocks with the required egress devices.

Codes, cards, fobs and phones have made keys optional. For magnetic lock installation service in Encino, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Who uses this service
Electronic lock and access control customers in Encino range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Encino.
Signs you need magnetic lock installation service
If any of the following sounds familiar, magnetic lock installation service is likely what you need:
- A glass or aluminum door has no room for a strike
- A gate needs electric locking
- You need a door that releases on fire alarm
- An existing maglock no longer holds
Magnetic Lock Installation across Encino
Encino is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of Encino, including Encino Hills, Amestoy Estates, Encino Village, Royal Oaks, and Lake Encino. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91316 and 91436 ZIP codes.
Encino runs from Ventura Boulevard office towers to gated hillside estates south of the boulevard, where smart locks, high-security deadbolts and proximity keys for luxury vehicles are everyday requests.
If you are out and about near Los Encinos State Historic Park, Sepulveda Basin Recreation Area, Encino Commons, or Balboa Sports Complex, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Encino by US-101, I-405, Ventura Boulevard, Balboa Boulevard, White Oak Avenue, and Hayvenhurst Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our magnetic lock installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
What affects the cost of magnetic lock installation service
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Encino. The technician confirms the figure before starting.
Why Encino customers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Encino.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Advice worth knowing
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Give each person their own code or credential so access can be removed individually.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Delete factory default codes on the day of installation.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
Why this is a job for a locksmith
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Encino
Customers who need magnetic lock installation service often ask about these as well. Each can usually be handled in the same visit to Encino.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Access Code Programming
Adding, removing or changing access codes.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
Magnetic Lock Installation near Encino
We provide the same magnetic lock installation service in the communities around Encino. See the main magnetic lock installation page or the full list of service areas.
- Magnetic Lock Installation in Lake Balboa
- Magnetic Lock Installation in Sherman Oaks
- Magnetic Lock Installation in Tarzana
- Magnetic Lock Installation in Reseda
- Magnetic Lock Installation in Van Nuys
- Magnetic Lock Installation in Valley Glen
- Magnetic Lock Installation in Northridge
- Magnetic Lock Installation in North Hills
- Magnetic Lock Installation in Panorama City
- Magnetic Lock Installation in Winnetka
- Magnetic Lock Installation in Woodland Hills
- Magnetic Lock Installation in Valley Village
Magnetic Lock Installation in Encino: frequently asked questions
Do maglocks unlock when the power goes out?
Yes. Maglocks are fail-safe and release without power. A battery backup keeps the door secured during outages while still allowing people to exit.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Which smart lock is best for a home in Encino?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which parts of Encino do you serve?
All of Encino, including Encino Hills, Amestoy Estates, Encino Village, and Royal Oaks, and addresses in ZIP codes 91316 and 91436.
Is there a travel charge for Encino?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Encino, so you know the cost in advance.
Do you have a locksmith shop in Encino?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Encino and the rest of the San Fernando Valley area. All work is done at your location.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
