Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2000 Dodge Durango Key Replacement in Fullerton, CA

Big Daddy Car Key Replacement makes 2000 Dodge Durango keys on site in Fullerton. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2000 Dodge Durango Key Replacement in Fullerton, CA by Big Daddy Car Key Replacement

Quick answer

The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Dodge Durango keys on site in Fullerton, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2000 Dodge Durango
Typical key
Traditional metal key
Transponder chip
Usually no; varies
Blade
Edge-cut
Programming
Not normally required
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2000 Dodge Durango use?

The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.

Traditional metal key

A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

2000 Dodge Durango key replacement in Fullerton
Traditional metal key for a 2000 Dodge Durango, made on site in Fullerton.

How we make a 2000 Dodge Durango key

For the 2000 Dodge Durango we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.

This page covers the 2000 model year. For other years, see the Dodge Durango key replacement overview, or browse all Dodge models.

How Dodge key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Dodge keys progressed from plain metal keys to Sentry Key transponders, then Fobik pod keys in 2008, and proximity fobs on performance and family models from 2011. Charger and Challenger theft has made correct, secure programming especially important.

Common Dodge key and lock problems

These are the issues we see most often on Dodge vehicles in Fullerton:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Dodge right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

2000 Dodge Durango key replacement across Fullerton

Located in Orange County, Fullerton is an incorporated city within our service area. Our Dodge key replacement service reaches all of Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, the Cal State Fullerton area, the Coyote Hills area, and the Orangethorpe Avenue corridor, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 92831, 92832, 92833, and 92835.

Fullerton pairs a historic downtown and streets of pre-war bungalows with a large university, a community college and the hillside homes of Sunny Hills, so student rental lockouts, original door hardware that needs careful repair and late-night car lockouts downtown are all familiar calls.

People call us from all over Fullerton, including the areas around Cal State Fullerton, Fullerton College, the Fullerton Transportation Center, the Fullerton Arboretum, and the Muckenthaler Cultural Center. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Fullerton follows SR-91, SR-57, I-5, Harbor Boulevard, Commonwealth Avenue, and Chapman Avenue. You get a realistic arrival estimate when you call.

Getting a 2000 Dodge Durango key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2000 Dodge Durango, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2000 Dodge Durango key in Fullerton
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Dodge key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2000 Dodge Durango key

Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.

Situations we are called to most often

  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The dash reads "key not detected" and the start button does nothing.
  • A hardware-store copy opens the door but the engine will not start.
  • The key is locked in the trunk and the trunk release is disabled.
  • The key fob went through the washing machine.

Why drivers in Fullerton choose Big Daddy

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Fullerton.
Dodge car key service in Fullerton
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Dodge key

Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.

  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Dodge Durango years

Other Dodge models

2000 Dodge Durango keys near Fullerton

We make 2000 Dodge Durango keys in the communities around Fullerton as well. See the main 2000 Dodge Durango key replacement page or the Fullerton locksmith page.

2000 Dodge Durango key replacement in Fullerton: frequently asked questions

Does a 2000 Dodge Durango key need programming?

A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.

Can any hardware store copy my 2000 Dodge Durango key?

If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.

My Dodge key turns in the door but not the ignition. Why?

The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.

Do I need a PIN code to program a Dodge key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Dodge with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Do I have to tow my 2000 Dodge Durango to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Does car insurance cover a replacement Dodge key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Is a locksmith-made Dodge key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you unlock my 2000 Dodge Durango if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Can you program a key I bought online for my 2000 Dodge Durango?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Which parts of Fullerton do you serve?

All of Fullerton, including Downtown Fullerton, Sunny Hills, Amerige Heights, and the Cal State Fullerton area, and addresses in ZIP codes 92831, 92832, 92833, and 92835.

Can you make car keys in Fullerton?

Yes. We cut and program car keys on site anywhere in Fullerton, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith