Quick answer
Drill-Resistant Lock Installation: Installing hardened locks and cylinders. Big Daddy Car Key Replacement provides drill-resistant lock installation service in Glendale as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Drill-Resistant Lock Installation
- Area
- Glendale, Los Angeles County, CA (91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Security Upgrade Services
- Phone
- (562) 550-7206
On this page
- What drill-resistant lock installation means
- Who we help in Glendale
- Signs you need drill-resistant lock installation service
- Drill-Resistant Lock Installation across Glendale
- How our drill-resistant lock installation service works
- Common situations in Glendale
- Equipment and hardware on the van
- A short glossary
- How drill-resistant lock installation service is priced
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Glendale
- Drill-Resistant Lock Installation near Glendale
- Drill-Resistant Lock Installation in Glendale: frequently asked questions
What drill-resistant lock installation means
Installing hardened locks and cylinders. Drilling attacks the shear line or the cylinder’s retaining screws. Drill-resistant locks place hardened steel pins, plates or ball bearings in those paths so bits skate or break. On commercial doors we add hardened cylinder collars and guard rings that also block wrench and pulling attacks.

Good security is mostly a matter of removing the easy ways in. Our drill-resistant lock installation service in Glendale looks at your doors the way an intruder would and strengthens the weak points first: short screws, shallow bolts, exposed latches, uncontrolled keys.
Who we help in Glendale
Security upgrades in Glendale are requested by new homeowners, people who have experienced or witnessed a break-in, landlords meeting their obligations, and businesses responding to theft, an insurance requirement or a contract that demands key control.
This service is part of our security upgrade services in Glendale.
Signs you need drill-resistant lock installation service
People in Glendale usually call us for drill-resistant lock installation service in situations like these:
- A lock was drilled in a previous break-in
- You have exposed mortise or rim cylinders
- The door protects high-value contents
- You are fitting a new deadbolt and want it hardened
Drill-Resistant Lock Installation across Glendale
Located in Los Angeles County, Glendale is an incorporated city within our Burbank, Glendale & Foothills service area. Our drill-resistant lock installation service reaches all of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, Verdugo Woodlands, Montrose, Sparr Heights, Glenoaks Canyon, and Chevy Chase Canyon, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208 ZIP codes.
Glendale is one of the county’s largest cities, with high-rise offices and condos downtown, thousands of apartment units, and historic Spanish and Tudor homes in the hills, all with very different lock needs.
If you are out and about near The Americana at Brand, Glendale Galleria, Brand Library & Park, the Alex Theatre, or Glendale Community College, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Glendale follows SR-134, SR-2, I-5, Brand Boulevard, Colorado Street, and Glenoaks Boulevard. You get a realistic arrival estimate when you call.
How our drill-resistant lock installation service works
Understand the concern
A recent incident, an insurance request, lost keys or general unease each lead to different priorities. We start by asking what prompted the call.
Walk the entry points
Every exterior door, sliding door, gate and garage entry is checked for lock grade, bolt throw, strike and frame strength, and exposure.
Review key control
We ask who has keys, whether they can be copied freely, and whether anyone who should not have access still might.
Prioritize the recommendations
You receive a ranked list: the inexpensive fixes with the biggest effect first, then upgrades that are worthwhile but optional.
Install the upgrades
High-security cylinders, deadbolts, reinforced strikes, door wraps and latch guards are fitted, and locks are rekeyed to the new system.
Register and hand over
For restricted key systems we record the authorized signers and issue numbered keys, so every copy from then on is accounted for.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Glendale
- You suspect someone entered without leaving any sign of force.
- Keys have been issued for years and no one can say how many exist.
- You are away for long periods and want the house properly secured.
- An insurer or client contract requires documented key control.
- A neighbor was burgled through the back door and you want to check your own.
- A door was kicked in once and repaired with nothing stronger than before.
Equipment and hardware on the van
Security upgrades draw on a specific set of products: deadbolts and cylinders tested to UL 437 and the higher ANSI/BHMA grades, with hardened steel inserts, sidebars or other secondary locking and patent-protected keyways; heavy security strikes; full-length jamb reinforcement; wrap-around door plates; latch guards for out-swinging doors; hinge security studs; and secondary locks for sliding doors. We supply and install these and register key authorization for restricted systems.
A short glossary
- Hardened insert
- A piece of hardened steel placed inside a lock to stop drill bits.
- Key control
- Knowing how many keys exist and who holds them, supported by keys that cannot be freely copied.
- Security pins
- Specially shaped pins, such as spools, that make a lock harder to pick.
- Reinforced strike
- A heavy strike plate fastened with long screws into the wall framing.
- Patented keyway
- A key profile protected by patent, so blanks are legally restricted.
- High-security lock
- A lock independently tested to resist picking, drilling and forcing, usually with restricted keys.
- UL 437
- A standard for key locks covering resistance to picking, drilling, prying and similar attacks.
- Lock bumping
- Opening a pin tumbler lock with a specially cut key and a light tap.
How drill-resistant lock installation service is priced
- Key system
- Restricted keys cost more per key and are worth it where duplication control matters.
- Door and frame condition
- A weak door or damaged frame needs reinforcement or replacement before a strong lock can help.
- Commercial requirements
- Business upgrades must respect fire and egress codes, which can determine the hardware.
- Retrofit or full replacement
- Fitting high-security cylinders into existing locks is often cheaper than replacing whole locksets.
- Number of doors
- Most properties need the best hardware on two or three primary doors, not on every door.
- Level of protection
- A reinforced strike and better deadbolt are modest in cost. UL-listed high-security locks with patented keys cost considerably more.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why call Big Daddy Car Key Replacement
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Practical advice from our locksmiths
- Trim shrubs near doors and keep entries lit. Visibility is a deterrent.
- Solid-core or metal doors are a prerequisite. Hardware cannot rescue a hollow door.
- Rekey after any loss of keys and after any change in who should have access.
- Secure the back and side doors to the same standard as the front. They are attacked more often.
- Spend first on the frame: a reinforced strike with three-inch screws does more than an expensive lock on a weak jamb.
- Treat the door from the garage to the house as an exterior door.
- Use restricted keys if you need to know exactly how many copies exist.
- Add secondary locks and anti-lift protection to sliding doors.
Why this is a job for a locksmith
It is easy to spend money on security that does little, such as a premium lock mounted on a jamb that splits with one kick, or a restricted key system undermined by one unprotected door. A locksmith looks at the whole opening and the whole key system, puts the budget where it has the most effect, and installs hardware so that it reaches the building’s structure.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Glendale
Customers who need drill-resistant lock installation service often ask about these as well. Each can usually be handled in the same visit to Glendale.
- Reinforced Door Hardware
Installing heavy-duty hardware for better protection.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Lock Security Assessment
Inspecting locks, doors, frames and access points to recommend improvements.
- Pick-Resistant Lock Installation
Installing locks with higher resistance to picking.
- Key Control Systems
Installing lock systems that prevent unauthorized key copies.
- Commercial Security Upgrade
Improving locks, access control, exit devices and door hardware for businesses.
- Anti-Bump Lock Installation
Installing locks designed to resist lock bumping.
- Home Security Lock Upgrade
Upgrading locks to improve safety and reduce break-in risk.
- Rental Property Security Upgrade
Changing locks, rekeying units, securing mailboxes and upgrading common areas.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Lost Car Key Replacement
Making a new car key when all keys are lost.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
Drill-Resistant Lock Installation near Glendale
We provide the same drill-resistant lock installation service in the communities around Glendale. See the main drill-resistant lock installation page or the full list of service areas.
- Drill-Resistant Lock Installation in Burbank
- Drill-Resistant Lock Installation in La Cañada Flintridge
- Drill-Resistant Lock Installation in Toluca Lake
- Drill-Resistant Lock Installation in South Pasadena
- Drill-Resistant Lock Installation in Pasadena
- Drill-Resistant Lock Installation in West Hollywood
- Drill-Resistant Lock Installation in Studio City
- Drill-Resistant Lock Installation in Altadena
- Drill-Resistant Lock Installation in North Hollywood
- Drill-Resistant Lock Installation in Alhambra
- Drill-Resistant Lock Installation in Valley Village
- Drill-Resistant Lock Installation in Sun Valley
Drill-Resistant Lock Installation in Glendale: frequently asked questions
How do I know if my lock is drill resistant?
Look for a UL 437 listing or a manufacturer statement of hardened steel inserts. Standard residential locks are plain brass and have little drill resistance.
Will better locks lower my insurance?
Some insurers offer discounts for deadbolts and other protective devices. Ask your insurer what they recognize; we can document what was installed.
What is the best security upgrade for a property in Glendale?
For most homes: a quality deadbolt with a one-inch bolt on each exterior door, reinforced strikes with long screws, and a rekey so only known keys exist. Businesses add high-security cylinders, latch guards and key control.
Do you offer a security assessment?
Yes. We inspect doors, locks, frames and key control and give you a prioritized list of improvements.
What do the ANSI/BHMA grades mean?
They are performance ratings. Grade 1 is the highest for strength and durability, Grade 2 is solid residential quality, and Grade 3 is basic.
Are high-security locks worth the price?
On primary doors, yes. They resist picking, bumping and drilling, and their restricted keys cannot be copied without your authorization.
How do burglars usually get in?
Most often by forcing a door, kicking or prying at the latch side, or through an unlocked door or window. Reinforcing the door and frame addresses the most common method.
Can I upgrade security without replacing all my locks?
Usually. Many locks accept high-security replacement cylinders, and reinforcement hardware fits around existing locks.
How long does it take a locksmith to reach me in Glendale?
It depends on where the nearest technician is and on traffic along SR-134, SR-2, or I-5. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Glendale?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendale and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
Are you open 24 hours in Glendale?
Yes. We take calls and dispatch to Glendale 24 hours a day, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
