Quick answer
Drill-Resistant Lock Installation: Installing hardened locks and cylinders. Big Daddy Car Key Replacement provides drill-resistant lock installation service in Pasadena as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Drill-Resistant Lock Installation
- Area
- Pasadena, Los Angeles County, CA (91101, 91103, 91104, 91105, 91106, 91107)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Security Upgrade Services
- Phone
- (562) 550-7206
On this page
- What drill-resistant lock installation involves
- Who we help in Pasadena
- When you need drill-resistant lock installation service
- Drill-Resistant Lock Installation across Pasadena
- What happens when you call
- Common situations in Pasadena
- Tools, parts and hardware we carry
- Terms worth knowing
- How drill-resistant lock installation service is priced
- What you can expect from us
- Advice worth knowing
- Professional service compared with doing it yourself
- Our service standards
- Questions to ask any locksmith
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Pasadena
- Drill-Resistant Lock Installation near Pasadena
- Drill-Resistant Lock Installation in Pasadena: frequently asked questions
What drill-resistant lock installation involves
Installing hardened locks and cylinders. Drilling attacks the shear line or the cylinder’s retaining screws. Drill-resistant locks place hardened steel pins, plates or ball bearings in those paths so bits skate or break. On commercial doors we add hardened cylinder collars and guard rings that also block wrench and pulling attacks.

Good security is mostly a matter of removing the easy ways in. Our drill-resistant lock installation service in Pasadena looks at your doors the way an intruder would and strengthens the weak points first: short screws, shallow bolts, exposed latches, uncontrolled keys.
Who we help in Pasadena
Security upgrades in Pasadena are requested by new homeowners, people who have experienced or witnessed a break-in, landlords meeting their obligations, and businesses responding to theft, an insurance requirement or a contract that demands key control.
This service is part of our security upgrade services in Pasadena.
When you need drill-resistant lock installation service
These are the most common reasons customers in Pasadena ask for drill-resistant lock installation service:
- A lock was drilled in a previous break-in
- You have exposed mortise or rim cylinders
- The door protects high-value contents
- You are fitting a new deadbolt and want it hardened
Drill-Resistant Lock Installation across Pasadena
Pasadena is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Our drill-resistant lock installation service reaches all of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.
What happens when you call
Understand the concern
A recent incident, an insurance request, lost keys or general unease each lead to different priorities. We start by asking what prompted the call.
Walk the entry points
Every exterior door, sliding door, gate and garage entry is checked for lock grade, bolt throw, strike and frame strength, and exposure.
Review key control
We ask who has keys, whether they can be copied freely, and whether anyone who should not have access still might.
Prioritize the recommendations
You receive a ranked list: the inexpensive fixes with the biggest effect first, then upgrades that are worthwhile but optional.
Install the upgrades
High-security cylinders, deadbolts, reinforced strikes, door wraps and latch guards are fitted, and locks are rekeyed to the new system.
Register and hand over
For restricted key systems we record the authorized signers and issue numbered keys, so every copy from then on is accounted for.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Common situations in Pasadena
- Keys have been issued for years and no one can say how many exist.
- A door was kicked in once and repaired with nothing stronger than before.
- An insurer or client contract requires documented key control.
- A neighbor was burgled through the back door and you want to check your own.
- You are away for long periods and want the house properly secured.
- You suspect someone entered without leaving any sign of force.
Tools, parts and hardware we carry
Security upgrades draw on a specific set of products: deadbolts and cylinders tested to UL 437 and the higher ANSI/BHMA grades, with hardened steel inserts, sidebars or other secondary locking and patent-protected keyways; heavy security strikes; full-length jamb reinforcement; wrap-around door plates; latch guards for out-swinging doors; hinge security studs; and secondary locks for sliding doors. We supply and install these and register key authorization for restricted systems.
Terms worth knowing
- Patented keyway
- A key profile protected by patent, so blanks are legally restricted.
- Hardened insert
- A piece of hardened steel placed inside a lock to stop drill bits.
- Key control
- Knowing how many keys exist and who holds them, supported by keys that cannot be freely copied.
- Lock bumping
- Opening a pin tumbler lock with a specially cut key and a light tap.
- Reinforced strike
- A heavy strike plate fastened with long screws into the wall framing.
- Security pins
- Specially shaped pins, such as spools, that make a lock harder to pick.
- High-security lock
- A lock independently tested to resist picking, drilling and forcing, usually with restricted keys.
- UL 437
- A standard for key locks covering resistance to picking, drilling, prying and similar attacks.
How drill-resistant lock installation service is priced
- Commercial requirements
- Business upgrades must respect fire and egress codes, which can determine the hardware.
- Level of protection
- A reinforced strike and better deadbolt are modest in cost. UL-listed high-security locks with patented keys cost considerably more.
- Key system
- Restricted keys cost more per key and are worth it where duplication control matters.
- Retrofit or full replacement
- Fitting high-security cylinders into existing locks is often cheaper than replacing whole locksets.
- Door and frame condition
- A weak door or damaged frame needs reinforcement or replacement before a strong lock can help.
- Number of doors
- Most properties need the best hardware on two or three primary doors, not on every door.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Pasadena. The technician confirms the figure before starting.
What you can expect from us
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Advice worth knowing
- A deadbolt needs a full one-inch throw and a pocket deep enough to let it extend completely.
- Do not rely on a "Do Not Duplicate" stamp for key control.
- Rekey after any loss of keys and after any change in who should have access.
- Secure the back and side doors to the same standard as the front. They are attacked more often.
- Add secondary locks and anti-lift protection to sliding doors.
- Solid-core or metal doors are a prerequisite. Hardware cannot rescue a hollow door.
- Treat the door from the garage to the house as an exterior door.
- Spend first on the frame: a reinforced strike with three-inch screws does more than an expensive lock on a weak jamb.
Professional service compared with doing it yourself
It is easy to spend money on security that does little, such as a premium lock mounted on a jamb that splits with one kick, or a restricted key system undermined by one unprotected door. A locksmith looks at the whole opening and the whole key system, puts the budget where it has the most effect, and installs hardware so that it reaches the building’s structure.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Pasadena
Customers who need drill-resistant lock installation service often ask about these as well. Each can usually be handled in the same visit to Pasadena.
- Rental Property Security Upgrade
Changing locks, rekeying units, securing mailboxes and upgrading common areas.
- Lock Security Assessment
Inspecting locks, doors, frames and access points to recommend improvements.
- Anti-Bump Lock Installation
Installing locks designed to resist lock bumping.
- Key Control Systems
Installing lock systems that prevent unauthorized key copies.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Commercial Security Upgrade
Improving locks, access control, exit devices and door hardware for businesses.
- Pick-Resistant Lock Installation
Installing locks with higher resistance to picking.
- Reinforced Door Hardware
Installing heavy-duty hardware for better protection.
- Home Security Lock Upgrade
Upgrading locks to improve safety and reduce break-in risk.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
Drill-Resistant Lock Installation near Pasadena
We provide the same drill-resistant lock installation service in the communities around Pasadena. See the main drill-resistant lock installation page or the full list of service areas.
- Drill-Resistant Lock Installation in South Pasadena
- Drill-Resistant Lock Installation in San Marino
- Drill-Resistant Lock Installation in Altadena
- Drill-Resistant Lock Installation in Alhambra
- Drill-Resistant Lock Installation in San Gabriel
- Drill-Resistant Lock Installation in La Cañada Flintridge
- Drill-Resistant Lock Installation in Sierra Madre
- Drill-Resistant Lock Installation in Temple City
- Drill-Resistant Lock Installation in Monterey Park
- Drill-Resistant Lock Installation in Rosemead
- Drill-Resistant Lock Installation in Arcadia
- Drill-Resistant Lock Installation in Glendale
Drill-Resistant Lock Installation in Pasadena: frequently asked questions
How do I know if my lock is drill resistant?
Look for a UL 437 listing or a manufacturer statement of hardened steel inserts. Standard residential locks are plain brass and have little drill resistance.
What do the ANSI/BHMA grades mean?
They are performance ratings. Grade 1 is the highest for strength and durability, Grade 2 is solid residential quality, and Grade 3 is basic.
Will better locks lower my insurance?
Some insurers offer discounts for deadbolts and other protective devices. Ask your insurer what they recognize; we can document what was installed.
Can I upgrade security without replacing all my locks?
Usually. Many locks accept high-security replacement cylinders, and reinforcement hardware fits around existing locks.
What is the best security upgrade for a property in Pasadena?
For most homes: a quality deadbolt with a one-inch bolt on each exterior door, reinforced strikes with long screws, and a rekey so only known keys exist. Businesses add high-security cylinders, latch guards and key control.
Do you offer a security assessment?
Yes. We inspect doors, locks, frames and key control and give you a prioritized list of improvements.
Are high-security locks worth the price?
On primary doors, yes. They resist picking, bumping and drilling, and their restricted keys cannot be copied without your authorization.
How do burglars usually get in?
Most often by forcing a door, kicking or prying at the latch side, or through an unlocked door or window. Reinforcing the door and frame addresses the most common method.
How long does it take a locksmith to reach me in Pasadena?
It depends on where the nearest technician is and on traffic along I-210, SR-134, or SR-110. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for Pasadena?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pasadena, so you know the cost in advance.
Are you open 24 hours in Pasadena?
Yes. We take calls and dispatch to Pasadena 24 hours a day, including weekends and holidays.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
