Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Exit Device Repair in Glendale, CA

Need exit device repair service in Glendale? Big Daddy Car Key Replacement sends a mobile locksmith to your home, business or vehicle, 24 hours a day. Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Exit Device Repair in Glendale, CA by Big Daddy Car Key Replacement

Quick answer

Exit Device Repair: Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Big Daddy Car Key Replacement provides exit device repair service in Glendale as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Exit Device Repair
Area
Glendale, Los Angeles County, CA (91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Commercial Locksmith Services
Phone
(562) 550-7206
On this page

What exit device repair involves

Fixing commercial exit devices, dogging mechanisms, latches, rods and trim. Exit devices have many moving parts: touchpads, latchbolts, top and bottom rods, dogging cylinders and outside lever trim. Vertical rods go out of adjustment as doors sag, and bottom latches clog with debris. We adjust rods, replace worn latches and trim, and convert troublesome bottom rods to less-bottom-rod setups where permitted.

Exit Device Repair in Glendale, CA by Big Daddy Car Key Replacement
Exit Device Repair in Glendale: mobile service, carried out at your location.

Every business in Glendale eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our exit device repair service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.

Who we help in Glendale

Our commercial customers in Glendale include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.

This service is part of our commercial locksmith services in Glendale.

When you need exit device repair service

People in Glendale usually call us for exit device repair service in situations like these:

  • Top or bottom rods do not engage
  • The outside lever no longer opens the door
  • The dogging key will not hold the bar down
  • The device rattles or the end cap is missing

Exit Device Repair across Glendale

Glendale is an incorporated city in Los Angeles County, part of the Burbank, Glendale & Foothills area we cover every day. Our exit device repair service reaches all of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, Verdugo Woodlands, Montrose, Sparr Heights, Glenoaks Canyon, and Chevy Chase Canyon, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208 ZIP codes.

Glendale is one of the county’s largest cities, with high-rise offices and condos downtown, thousands of apartment units, and historic Spanish and Tudor homes in the hills, all with very different lock needs.

Whether you are at home, at work, or stuck near The Americana at Brand, Glendale Galleria, Brand Library & Park, the Alex Theatre, or Glendale Community College, tell the dispatcher the nearest landmark and we will find you. Glendale is served by SR-134, SR-2, I-5, Brand Boulevard, Colorado Street, and Glenoaks Boulevard, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Our exit device repair process, step by step

  1. Discuss the need and the site

    We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.

  2. Verify authority

    Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.

  3. Survey the openings

    Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.

  4. Agree scope and price

    You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.

  5. Carry out the work around your schedule

    Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.

  6. Test, document and hand over

    Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing exit device repair service in Glendale, California
Our technicians work from fully equipped vans throughout Glendale.

Situations we handle regularly

  • The storefront door will not latch and the shop cannot be left for the night.
  • You are taking over a suite and need the previous tenant’s keys cut off before move-in.
  • Staff need access to the sales floor but not the office, stockroom or IT closet.
  • The back door shows pry marks around the latch after the weekend.
  • A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
  • A manager is let go and returns only some of the keys issued.
  • A closer has failed and the front door slams hard enough to rattle the glass.

Equipment and hardware on the van

Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.

Terms worth knowing

Exit device
Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
Interchangeable core
A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
Lock function
How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
Door closer
A hydraulic device that closes a door at a controlled speed and holds it latched.
Cylindrical lock
A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Mortise lock
A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
Restricted keyway
A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
Master key system
A planned arrangement in which each lock has its own key and a master key opens all of them.

What affects the cost of exit device repair service

Key system complexity
A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
Hardware grade and function
Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
Electrified hardware
Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
Number and type of doors
Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
Code and fire-rating requirements
Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
After-hours scheduling
Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Glendale. The technician confirms the figure before starting.

What you can expect from us

Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Glendale.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Commercial locksmith work in Glendale, CA
Commercial Locksmith Services from Big Daddy Car Key Replacement.

Advice worth knowing

  • Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
  • Store spare keys in a locked key cabinet, not a desk drawer.
  • Keep a written key log: who holds which key, and the date it was issued and returned.
  • Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
  • Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
  • Never chain, padlock or bolt a required exit door while the building is occupied.
  • Consider keypad or card access for doors with frequent staff turnover.
  • Give each employee access only to the doors their job requires.

Doing it yourself versus calling a professional

Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.

Our service standards

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

How to choose a locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Get an itemized receipt showing labor, parts and the business details.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

After the visit

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need exit device repair service often ask about these as well. Each can usually be handled in the same visit to Glendale.

  • Office Lockout Service

    Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.

  • Exit Device Installation

    Installing code-compliant exit devices for commercial emergency exits.

  • Storefront Lock Repair

    Repairing locks on glass storefront doors, aluminum doors and commercial entryways.

  • Mortise Lock Installation

    Installing commercial mortise lock bodies, cylinders, trims and handles.

  • Rim Cylinder Replacement

    Replacing rim cylinders used with panic bars, exit devices and commercial doors.

  • Commercial Door Hardware

    Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.

  • Commercial Lock Change

    Replacing commercial-grade locks on offices, entry doors, back doors, storage rooms and restricted areas.

  • Storefront Lock Replacement

    Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.

  • IC Core Lock Systems

    Installing and rekeying interchangeable core lock systems for commercial properties.

  • Commercial Locksmith

    Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.

  • Safe Locksmith

    Opening, repairing, servicing and changing combinations on home and business safes.

  • Ignition Repair

    Repairing ignition cylinders that are stuck, worn or will not turn.

  • Gate Lock Repair

    Fixing stuck, broken, rusted or misaligned gate locks and latches.

  • Emergency Locksmith

    Urgent lock and key help for homes, businesses and vehicles at any hour.

  • Car Lockout

    Unlocking vehicles when keys are locked inside.

Exit Device Repair near Glendale

We provide the same exit device repair service in the communities around Glendale. See the main exit device repair page or the full list of service areas.

Exit Device Repair in Glendale: frequently asked questions

Can vertical rod exit devices be adjusted?

Yes. Rod length and latch engagement are adjustable, and most problems come from sagging doors pulling the rods out of range. We realign the door first and then set the rods so both latches engage fully.

Do you offer ongoing service for multiple locations?

Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.

Are our exit doors compliant?

We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.

Can you provide documentation for our records?

Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.

How do we stop employees from copying keys?

Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.

What brands of commercial hardware do you service?

We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.

How long does it take to rekey a business?

A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.

Who is allowed to authorize lock changes for a business?

The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.

How long does it take a locksmith to reach me in Glendale?

It depends on where the nearest technician is and on traffic along SR-134, SR-2, or I-5. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Do you have a locksmith shop in Glendale?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendale and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.

Can you make car keys in Glendale?

Yes. We cut and program car keys on site anywhere in Glendale, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Which areas do you cover?

We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

Call Now (562) 550-7206Open 24 hours · mobile locksmith