Quick answer
Office Lockout Service: Unlocking office doors, private offices, conference rooms, file rooms and storage rooms. Big Daddy Car Key Replacement provides office lockout service in Glendale as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Office Lockout Service
- Area
- Glendale, Los Angeles County, CA (91201, 91202, 91203, 91204, 91205, 91206, 91207, 91208)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What office lockout service means
- Customers we serve in Glendale
- Reasons to call for office lockout service
- Office Lockout Service across Glendale
- What happens when you call
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- Cost factors for office lockout service
- Why Glendale customers choose Big Daddy
- Advice worth knowing
- Doing it yourself versus calling a professional
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- Aftercare and records
- Related locksmith services in Glendale
- Office Lockout Service near Glendale
- Office Lockout Service in Glendale: frequently asked questions
What office lockout service means
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms. Interior office lockouts are usually caused by a pushed button on a lever lock, a lost key to a rarely used room, or a storeroom lock that latched behind someone. We open these quietly without damage, then cut a key or rekey the lock so the room is not lost again.

Every business in Glendale eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our office lockout service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Glendale
Our commercial customers in Glendale include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Glendale.
Reasons to call for office lockout service
People in Glendale usually call us for office lockout service in situations like these:
- A private office locked with the keys inside
- The file room or server closet key is missing
- A conference room lever is locked and jammed
- A desk or cabinet is locked as well
Office Lockout Service across Glendale
Located in Los Angeles County, Glendale is an incorporated city within our Burbank, Glendale & Foothills service area. Our office lockout service reaches all of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, Verdugo Woodlands, Montrose, Sparr Heights, Glenoaks Canyon, and Chevy Chase Canyon, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 91201, 91202, 91203, 91204, 91205, 91206, 91207, and 91208.
Glendale is one of the county’s largest cities, with high-rise offices and condos downtown, thousands of apartment units, and historic Spanish and Tudor homes in the hills, all with very different lock needs.
If you are out and about near The Americana at Brand, Glendale Galleria, Brand Library & Park, the Alex Theatre, or Glendale Community College, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Glendale follows SR-134, SR-2, I-5, Brand Boulevard, Colorado Street, and Glenoaks Boulevard. You get a realistic arrival estimate when you call.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- The storefront door will not latch and the shop cannot be left for the night.
- A closer has failed and the front door slams hard enough to rattle the glass.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- The back door shows pry marks around the latch after the weekend.
- A manager is let go and returns only some of the keys issued.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Cost factors for office lockout service
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Glendale customers choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Advice worth knowing
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Give each employee access only to the doors their job requires.
- Never chain, padlock or bolt a required exit door while the building is occupied.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Glendale
Customers who need office lockout service often ask about these as well. Each can usually be handled in the same visit to Glendale.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Exit Device Repair
Fixing commercial exit devices, dogging mechanisms, latches, rods and trim.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Restaurant Locksmith Service
Lockouts, rekeys, panic bars, door closers, storefront locks and access control for restaurants.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
Office Lockout Service near Glendale
We provide the same office lockout service in the communities around Glendale. See the main office lockout service page or the full list of service areas.
- Office Lockout Service in Burbank
- Office Lockout Service in La Cañada Flintridge
- Office Lockout Service in Toluca Lake
- Office Lockout Service in South Pasadena
- Office Lockout Service in Pasadena
- Office Lockout Service in West Hollywood
- Office Lockout Service in Studio City
- Office Lockout Service in Altadena
- Office Lockout Service in North Hollywood
- Office Lockout Service in Alhambra
- Office Lockout Service in Valley Village
- Office Lockout Service in Sun Valley
Office Lockout Service in Glendale: frequently asked questions
Can you open a locked office without disturbing the business?
Yes. Interior office locks are opened with picks or bypass tools in minutes, quietly and without damage, so work continues around us.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you work outside our business hours in Glendale?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Which parts of Glendale do you serve?
All of Glendale, including Downtown Glendale, Adams Hill, Rossmoyne, and Verdugo Woodlands, and addresses in ZIP codes 91201, 91202, 91203, 91204, 91205, and 91206.
Do you have a locksmith shop in Glendale?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Glendale and the rest of the Burbank, Glendale & Foothills area. All work is done at your location.
How long does it take a locksmith to reach me in Glendale?
It depends on where the nearest technician is and on traffic along SR-134, SR-2, or I-5. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
