Quick answer
IC Core Lock Systems: Installing and rekeying interchangeable core lock systems for commercial properties. Big Daddy Car Key Replacement provides IC core lock service in Inglewood as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- IC Core Lock Systems
- Area
- Inglewood, Los Angeles County, CA (90301, 90302, 90303, 90304, 90305)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our IC core lock service
- Who uses this service
- When you need IC core lock service
- IC Core Lock Systems across Inglewood
- What happens when you call
- Typical calls we receive
- What our technicians bring
- Trade terms explained
- Cost factors for IC core lock service
- What you can expect from us
- Tips to avoid problems
- Doing it yourself versus calling a professional
- How we work on every job
- Choosing a locksmith: a short checklist
- How to prepare for the visit
- After the visit
- Related locksmith services in Inglewood
- IC Core Lock Systems near Inglewood
- IC Core Lock Systems in Inglewood: frequently asked questions
About our IC core lock service
Installing and rekeying interchangeable core lock systems for commercial properties. Interchangeable core locks let you rekey a door in seconds: a special control key pulls the figure-eight core out and a new core drops in, with no disassembly. Schools, retail chains and property managers use them so staff can swap cores themselves after a key is lost, and send the old cores out to be repinned.

A business door has three jobs: keep the wrong people out, let everyone inside get out safely, and survive thousands of cycles a week. Our IC core lock service in Inglewood covers all three, from storefront locks and exit devices to master key systems, with work scheduled around your hours of operation.
Who uses this service
Our commercial customers in Inglewood include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Inglewood.
When you need IC core lock service
If any of the following sounds familiar, IC core lock service is likely what you need:
- You rekey often because of staff turnover
- You manage many doors across locations
- You want to rekey without a service call each time
- An existing IC system needs new cores or keys
IC Core Lock Systems across Inglewood
Inglewood is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Customers anywhere in Inglewood, including Morningside Park, Downtown Inglewood, Century Heights, Fairview Heights, Lockhaven, and North Inglewood, can have a mobile technician sent directly to them. We serve the 90301, 90302, 90303, 90304, and 90305 ZIP codes.
Inglewood’s stadium district has transformed the city, bringing event-day car lockouts and new retail build-outs alongside established neighborhoods of 1920s-to-1950s homes that need rekeys and security upgrades.
Whether you are at home, at work, or stuck near SoFi Stadium, the Kia Forum, Intuit Dome, Hollywood Park, or YouTube Theater, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Inglewood by I-405, I-105, Century Boulevard, Manchester Boulevard, La Brea Avenue, and Crenshaw Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A manager is let go and returns only some of the keys issued.
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
What our technicians bring
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
Cost factors for IC core lock service
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Inglewood. The technician confirms the figure before starting.
What you can expect from us
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Inglewood.

Tips to avoid problems
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Give each employee access only to the doors their job requires.
- Consider keypad or card access for doors with frequent staff turnover.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Inglewood
Customers who need IC core lock service often ask about these as well. Each can usually be handled in the same visit to Inglewood.
- File Cabinet Lock Replacement
Replacing locks on filing cabinets, desks and office storage.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Commercial Door Hardware Repair
Repairing commercial handles, hinges, closers, locks, latches, strikes, pivots and door frames.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Mortise Lock Repair
Repairing or replacing worn, jammed or damaged mortise lock systems.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- High-Security Commercial Locks
Installing restricted keyway locks, pick-resistant locks, drill-resistant locks and bump-resistant lock systems.
- 24 Hour Locksmith
Locksmith help day or night, every day of the year.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
IC Core Lock Systems near Inglewood
We provide the same IC core lock service in the communities around Inglewood. See the main IC core lock systems page or the full list of service areas.
- IC Core Lock Systems in View Park–Windsor Hills
- IC Core Lock Systems in Ladera Heights
- IC Core Lock Systems in Hawthorne
- IC Core Lock Systems in Westmont
- IC Core Lock Systems in Athens
- IC Core Lock Systems in El Segundo
- IC Core Lock Systems in Culver City
- IC Core Lock Systems in Lawndale
- IC Core Lock Systems in Gardena
- IC Core Lock Systems in Marina del Rey
- IC Core Lock Systems in Manhattan Beach
- IC Core Lock Systems in Willowbrook
IC Core Lock Systems in Inglewood: frequently asked questions
What does IC core mean on a lock?
IC stands for interchangeable core. The keyed portion of the lock is a removable cartridge that a control key releases, so the lock can be rekeyed by swapping the core instead of taking the lock apart.
Can you work outside our business hours in Inglewood?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Are our exit doors compliant?
We can check that exit doors open with one motion and no key, that panic hardware is present where required, and that closers latch the doors. Final authority rests with your fire marshal or building official.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Which parts of Inglewood do you serve?
All of Inglewood, including Morningside Park, Downtown Inglewood, Century Heights, and Fairview Heights, and addresses in ZIP codes 90301, 90302, 90303, 90304, and 90305.
Is there a travel charge for Inglewood?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Inglewood, so you know the cost in advance.
Do you have a locksmith shop in Inglewood?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Inglewood and the rest of the South Bay area. All work is done at your location.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
