Quick answer
Door Hardware Repair: Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. Big Daddy Car Key Replacement provides door hardware repair service in La Mirada as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Hardware Repair
- Area
- La Mirada, Los Angeles County, CA (90638)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our door hardware repair service
- Who we help in La Mirada
- Reasons to call for door hardware repair service
- Door Hardware Repair across La Mirada
- How our door hardware repair service works
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- Cost factors for door hardware repair service
- Why La Mirada customers choose Big Daddy
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- What we commit to
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Once the work is done
- Related locksmith services in La Mirada
- Door Hardware Repair near La Mirada
- Door Hardware Repair in La Mirada: frequently asked questions
About our door hardware repair service
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. A door that will not latch or lock is rarely a lock problem alone. Hinges loosen, frames shift and weatherstripping swells, and the hardware goes out of line. We look at the whole opening, fix the cause, and leave the door closing with a push and locking with two fingers.

If you have to lift, push or slam a door to get it to lock, something is out of line. For door hardware repair service in La Mirada, call (562) 550-7206. A mobile technician diagnoses the opening, makes the repair on site and tests the door under normal use.
Who we help in La Mirada
Door hardware calls in La Mirada come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
Our full list of locksmith services shows everything we offer, and the La Mirada locksmith page covers local details.
Reasons to call for door hardware repair service
These are the most common reasons customers in La Mirada ask for door hardware repair service:
- The door must be slammed or lifted to latch
- The deadbolt only works if you push on the door
- The door rubs the frame or floor
- Hardware is loose, rattling or misaligned
Door Hardware Repair across La Mirada
La Mirada is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Our door hardware repair service reaches all of La Mirada, including the Biola University area, the La Mirada Boulevard corridor, the Imperial Highway corridor, and the industrial district near the 5, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP code 90638.
La Mirada is a planned 1950s suburb with a university campus and a sizable industrial district, so we handle student car lockouts, tract-home rekeys and warehouse hardware alike.
Whether you are at home, at work, or stuck near Biola University, the La Mirada Theatre for the Performing Arts, Splash! La Mirada Regional Aquatics Center, or La Mirada Regional Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach La Mirada by I-5, Imperial Highway, La Mirada Boulevard, Rosecrans Avenue, Valley View Avenue, and Santa Gertrudes Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our door hardware repair service works
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A latch has jammed and someone is stuck in a room.
- The back door swings outward and its latch is visible through the gap.
- The deadbolt only turns if you pull the door hard toward you.
- A previous break-in left the jamb cracked around the strike.
- The door drifts open by itself because the latch no longer catches.
- The top corner of the door rubs the frame and the paint is wearing through.
Tools, parts and hardware we carry
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
A short glossary
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Cost factors for door hardware repair service
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to La Mirada. The technician confirms the figure before starting.
Why La Mirada customers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to La Mirada.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Practical advice from our locksmiths
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
Why this is a job for a locksmith
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
How to choose a locksmith you can trust
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in La Mirada
Customers who need door hardware repair service often ask about these as well. Each can usually be handled in the same visit to La Mirada.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Chain Installation
Installing door chains or secondary security locks.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
Door Hardware Repair near La Mirada
We provide the same door hardware repair service in the communities around La Mirada. See the main door hardware repair page or the full list of service areas.
- Door Hardware Repair in Buena Park
- Door Hardware Repair in Norwalk
- Door Hardware Repair in Whittier
- Door Hardware Repair in La Habra Heights
- Door Hardware Repair in Santa Fe Springs
- Door Hardware Repair in Cerritos
- Door Hardware Repair in Artesia
- Door Hardware Repair in Hacienda Heights
- Door Hardware Repair in Fullerton
- Door Hardware Repair in Bellflower
- Door Hardware Repair in Pico Rivera
- Door Hardware Repair in Hawaiian Gardens
Door Hardware Repair in La Mirada: frequently asked questions
Why does my door not latch anymore?
The latch and strike plate have moved out of alignment, most often because hinge screws have loosened and the door has dropped. Tightening or shimming the hinges and adjusting the strike restores the latch.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Why do I have to push my door to lock it in La Mirada?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
Are you open 24 hours in La Mirada?
Yes. We take calls and dispatch to La Mirada 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in La Mirada?
It depends on where the nearest technician is and on traffic along I-5, Imperial Highway, or La Mirada Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of La Mirada do you serve?
All of La Mirada, including the Biola University area, the La Mirada Boulevard corridor, the Imperial Highway corridor, and the industrial district near the 5, and addresses in ZIP code 90638.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
