Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in La Mirada, CA

Need security strike plate installation service in La Mirada? Big Daddy Car Key Replacement sends a mobile locksmith to your home, business or vehicle, 24 hours a day. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in La Mirada, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in La Mirada as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
La Mirada, Los Angeles County, CA (90638)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

What security strike plate installation means

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in La Mirada, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in La Mirada: mobile service, carried out at your location.

Doors in La Mirada deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our security strike plate installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.

Who uses this service

Door hardware calls in La Mirada come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in La Mirada.

Signs you need security strike plate installation service

These are the most common reasons customers in La Mirada ask for security strike plate installation service:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across La Mirada

La Mirada is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Customers anywhere in La Mirada, including the Biola University area, the La Mirada Boulevard corridor, the Imperial Highway corridor, and the industrial district near the 5, can have a mobile technician sent directly to them. Service is available throughout ZIP code 90638.

La Mirada is a planned 1950s suburb with a university campus and a sizable industrial district, so we handle student car lockouts, tract-home rekeys and warehouse hardware alike.

Whether you are at home, at work, or stuck near Biola University, the La Mirada Theatre for the Performing Arts, Splash! La Mirada Regional Aquatics Center, or La Mirada Regional Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach La Mirada by I-5, Imperial Highway, La Mirada Boulevard, Rosecrans Avenue, Valley View Avenue, and Santa Gertrudes Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.

What happens when you call

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing security strike plate installation service in La Mirada, California
Our technicians work from fully equipped vans throughout La Mirada.

Situations we handle regularly

  • The top corner of the door rubs the frame and the paint is wearing through.
  • The door drifts open by itself because the latch no longer catches.
  • A previous break-in left the jamb cracked around the strike.
  • The deadbolt only turns if you pull the door hard toward you.
  • A latch has jammed and someone is stuck in a room.
  • The back door swings outward and its latch is visible through the gap.

What our technicians bring

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Terms worth knowing

Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Strike plate
The plate on the frame that receives the latch or bolt.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.

How security strike plate installation service is priced

Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Number of doors
Several doors in one visit cost less per door than separate calls.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to La Mirada. The technician confirms the figure before starting.

Why La Mirada customers choose Big Daddy

Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to La Mirada.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Door Hardware locksmith work in La Mirada, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Practical advice from our locksmiths

  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.

Why this is a job for a locksmith

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

How we work on every job

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

Choosing a locksmith: a short checklist

  • Get an itemized receipt showing labor, parts and the business details.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Aftercare and records

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to La Mirada.

Security Strike Plate Installation near La Mirada

We provide the same security strike plate installation service in the communities around La Mirada. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in La Mirada: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

How long does it take a locksmith to reach me in La Mirada?

It depends on where the nearest technician is and on traffic along I-5, Imperial Highway, or La Mirada Boulevard. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Are you open 24 hours in La Mirada?

Yes. We take calls and dispatch to La Mirada 24 hours a day, including weekends and holidays.

Is there a travel charge for La Mirada?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to La Mirada, so you know the cost in advance.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Call Now (562) 550-7206Open 24 hours · mobile locksmith