Quick answer
Keypad Lock Programming: Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Big Daddy Car Key Replacement provides keypad lock programming service in Lomita as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keypad Lock Programming
- Area
- Lomita, Los Angeles County, CA (90717)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What keypad lock programming means
- Who uses this service
- Reasons to call for keypad lock programming service
- Keypad Lock Programming across Lomita
- Our keypad lock programming process, step by step
- Typical calls we receive
- What our technicians bring
- A short glossary
- Cost factors for keypad lock programming service
- Why Lomita customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- Our service standards
- How to choose a locksmith you can trust
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Lomita
- Keypad Lock Programming near Lomita
- Keypad Lock Programming in Lomita: frequently asked questions
What keypad lock programming means
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Codes should be personal and temporary where possible: one per person, removed when no longer needed. We program master and user codes, set auto-lock timing, schedule or one-time codes on models that support them, and remove any default codes that shipped with the lock.

Electronic locks replace the question "who has a key?" with a list you control. Our keypad lock programming service in Lomita covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who uses this service
Electronic lock and access control customers in Lomita range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Lomita.
Reasons to call for keypad lock programming service
People in Lomita usually call us for keypad lock programming service in situations like these:
- You do not know the programming code
- A contractor’s code should be removed
- Everyone shares one code
- The manual is lost and settings need changing
Keypad Lock Programming across Lomita
Located in Los Angeles County, Lomita is an incorporated city within our South Bay service area. We cover every part of Lomita, including the Narbonne Avenue corridor, the Lomita Boulevard corridor, the Pacific Coast Highway corridor, and the hillside streets below Palos Verdes. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90717.
Lomita is a small residential city at the foot of the Palos Verdes hills, with older single-family homes and small businesses that favor straightforward, durable lock repairs and rekeys.
If you are out and about near the Lomita Railroad Museum, Lomita Park, the neighboring Zamperini Field, or the Pacific Coast Highway business strip, give us that location when you call and wait somewhere safe and visible. Lomita is served by Pacific Coast Highway, Lomita Boulevard, Narbonne Avenue, Western Avenue, Crenshaw Boulevard, and Eshelman Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our keypad lock programming process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A business needs to know who entered the stockroom and when.
- An apartment building wants to replace a shared entry key with fobs.
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Audit trail
- A stored record of which credential opened a door and when.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
Cost factors for keypad lock programming service
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Lomita customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lomita.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Practical advice from our locksmiths
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Review the user list every few months and remove anyone who no longer needs access.
- Delete factory default codes on the day of installation.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Keep firmware up to date. Updates often fix security issues.
- Avoid obvious codes such as birth years, addresses or repeated digits.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Lomita
Customers who need keypad lock programming service often ask about these as well. Each can usually be handled in the same visit to Lomita.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Bluetooth Lock Installation
Installing Bluetooth-enabled locks.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Mailbox Lock Replacement
Replacing mailbox locks when keys are lost, tenants move out or the lock is damaged.
Keypad Lock Programming near Lomita
We provide the same keypad lock programming service in the communities around Lomita. See the main keypad lock programming page or the full list of service areas.
- Keypad Lock Programming in West Carson
- Keypad Lock Programming in Rolling Hills Estates
- Keypad Lock Programming in Rolling Hills
- Keypad Lock Programming in Carson
- Keypad Lock Programming in Torrance
- Keypad Lock Programming in Palos Verdes Estates
- Keypad Lock Programming in Rancho Palos Verdes
- Keypad Lock Programming in Redondo Beach
- Keypad Lock Programming in Gardena
- Keypad Lock Programming in Hermosa Beach
- Keypad Lock Programming in Lawndale
- Keypad Lock Programming in Long Beach
Keypad Lock Programming in Lomita: frequently asked questions
I lost the programming code for my keypad lock. Can it be reset?
Yes. Most keypad locks have a reset procedure from inside the door that restores factory settings, after which new master and user codes are programmed.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Which smart lock is best for a home in Lomita?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Is there a travel charge for Lomita?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Lomita, so you know the cost in advance.
Which parts of Lomita do you serve?
All of Lomita, including the Narbonne Avenue corridor, the Lomita Boulevard corridor, the Pacific Coast Highway corridor, and the hillside streets below Palos Verdes, and addresses in ZIP code 90717.
Do you have a locksmith shop in Lomita?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lomita and the rest of the South Bay area. All work is done at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
