Quick answer
Keypad Lock Programming: Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Big Daddy Car Key Replacement provides keypad lock programming service in Torrance as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Keypad Lock Programming
- Area
- Torrance, Los Angeles County, CA (90501, 90502, 90503, 90504, 90505)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What keypad lock programming means
- Who uses this service
- Signs you need keypad lock programming service
- Keypad Lock Programming across Torrance
- How our keypad lock programming service works
- Common situations in Torrance
- Equipment and hardware on the van
- A short glossary
- How keypad lock programming service is priced
- Why Torrance customers choose Big Daddy
- Tips to avoid problems
- Doing it yourself versus calling a professional
- Our service standards
- How to choose a locksmith you can trust
- How to prepare for the visit
- Once the work is done
- Related locksmith services in Torrance
- Keypad Lock Programming near Torrance
- Keypad Lock Programming in Torrance: frequently asked questions
What keypad lock programming means
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors. Codes should be personal and temporary where possible: one per person, removed when no longer needed. We program master and user codes, set auto-lock timing, schedule or one-time codes on models that support them, and remove any default codes that shipped with the lock.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our keypad lock programming service in Torrance takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Torrance range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Torrance.
Signs you need keypad lock programming service
These are the most common reasons customers in Torrance ask for keypad lock programming service:
- You do not know the programming code
- A contractor’s code should be removed
- Everyone shares one code
- The manual is lost and settings need changing
Keypad Lock Programming across Torrance
Located in Los Angeles County, Torrance is an incorporated city within our South Bay service area. Our keypad lock programming service reaches all of Torrance, including Old Torrance, the Hollywood Riviera, Walteria, Southwood, West Torrance, North Torrance, and Seaside Ranchos, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 90501, 90502, 90503, 90504, and 90505.
Torrance is the South Bay’s largest city and a longtime home of Japanese automakers’ U.S. operations, with huge retail centers, industrial parks and neighborhoods of 1950s homes that keep every locksmith service busy.
If you are out and about near Del Amo Fashion Center, Torrance Beach, Zamperini Field, Madrona Marsh Preserve, or Torrance Memorial Medical Center, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Torrance by I-405, I-110, Pacific Coast Highway, Hawthorne Boulevard, Crenshaw Boulevard, and Torrance Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our keypad lock programming service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Common situations in Torrance
- Children get home from school before their parents and keep losing keys.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
- A smart lock reports "jammed" every evening when the door swells.
- A short-term rental needs a new code for every guest.
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
How keypad lock programming service is priced
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
Why Torrance customers choose Big Daddy
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Tips to avoid problems
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Review the user list every few months and remove anyone who no longer needs access.
- Turn on two-factor authentication for any account that can unlock your door.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
How to choose a locksmith you can trust
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Torrance
Customers who need keypad lock programming service often ask about these as well. Each can usually be handled in the same visit to Torrance.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Commercial Access Control Maintenance
Servicing card readers, fobs, electric strikes, maglocks and controllers.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Audit Trail Lock Systems
Installing locks that track access history.
- Smart Locks & Keyless Entry
Smart locks, keypad deadbolts and keyless entry systems supplied, installed and set up.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Keypad Lock Programming near Torrance
We provide the same keypad lock programming service in the communities around Torrance. See the main keypad lock programming page or the full list of service areas.
- Keypad Lock Programming in Redondo Beach
- Keypad Lock Programming in West Carson
- Keypad Lock Programming in Lomita
- Keypad Lock Programming in Carson
- Keypad Lock Programming in Rolling Hills Estates
- Keypad Lock Programming in Lawndale
- Keypad Lock Programming in Palos Verdes Estates
- Keypad Lock Programming in Hermosa Beach
- Keypad Lock Programming in Gardena
- Keypad Lock Programming in Manhattan Beach
- Keypad Lock Programming in Rolling Hills
- Keypad Lock Programming in Hawthorne
Keypad Lock Programming in Torrance: frequently asked questions
I lost the programming code for my keypad lock. Can it be reset?
Yes. Most keypad locks have a reset procedure from inside the door that restores factory settings, after which new master and user codes are programmed.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which smart lock is best for a home in Torrance?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Are you open 24 hours in Torrance?
Yes. We take calls and dispatch to Torrance 24 hours a day, including weekends and holidays.
Is there a travel charge for Torrance?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Torrance, so you know the cost in advance.
Do you have a locksmith shop in Torrance?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Torrance and the rest of the South Bay area. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Which areas do you cover?
We serve communities across Los Angeles County and Ventura County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
