Quick answer
Door Hardware Repair: Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. Big Daddy Car Key Replacement provides door hardware repair service in Long Beach as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Hardware Repair
- Area
- Long Beach, Los Angeles County, CA (90802, 90803, 90804, 90805, 90806, 90807, 90808, 90810, 90813, 90814, 90815)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our door hardware repair service
- Customers we serve in Long Beach
- Signs you need door hardware repair service
- Door Hardware Repair across Long Beach
- How our door hardware repair service works
- Situations we handle regularly
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of door hardware repair service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Why this is a job for a locksmith
- How we work on every job
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Long Beach
- Door Hardware Repair near Long Beach
- Door Hardware Repair in Long Beach: frequently asked questions
About our door hardware repair service
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly. A door that will not latch or lock is rarely a lock problem alone. Hinges loosen, frames shift and weatherstripping swells, and the hardware goes out of line. We look at the whole opening, fix the cause, and leave the door closing with a push and locking with two fingers.

Doors in Long Beach deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our door hardware repair service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Customers we serve in Long Beach
Door hardware calls in Long Beach come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
Our full list of locksmith services shows everything we offer, and the Long Beach locksmith page covers local details.
Signs you need door hardware repair service
People in Long Beach usually call us for door hardware repair service in situations like these:
- The door must be slammed or lifted to latch
- The deadbolt only works if you push on the door
- The door rubs the frame or floor
- Hardware is loose, rattling or misaligned
Door Hardware Repair across Long Beach
Long Beach is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. Customers anywhere in Long Beach, including Downtown Long Beach, Belmont Shore, Naples, Bixby Knolls, Los Altos, California Heights, Alamitos Beach, Wrigley, North Long Beach, and the East Village, can have a mobile technician sent directly to them. Service is available throughout ZIP codes 90802, 90803, 90804, 90805, 90806, 90807, 90808, 90810, 90813, 90814, and 90815.
Long Beach is a full-scale city with a major port, high-rise downtown condos, Craftsman and Spanish bungalows, canal homes in Naples and thousands of boat slips, so every specialty from marine keys to historic hardware applies.
People call us from all over Long Beach, including the areas around the Queen Mary, the Aquarium of the Pacific, the Port of Long Beach, California State University, Long Beach, and Long Beach Airport. A landmark or cross street helps the technician reach you quickly. Long Beach is served by I-710, I-405, SR-91, I-605, SR-22, and Pacific Coast Highway, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our door hardware repair service works
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- The back door swings outward and its latch is visible through the gap.
- The deadbolt only turns if you pull the door hard toward you.
- A latch has jammed and someone is stuck in a room.
- The door drifts open by itself because the latch no longer catches.
Equipment and hardware on the van
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Trade terms explained
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
What affects the cost of door hardware repair service
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Number of doors
- Several doors in one visit cost less per door than separate calls.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Long Beach. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Long Beach.

Advice worth knowing
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Lubricate latches and hinges lightly once a year, and wipe away the excess.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
Why this is a job for a locksmith
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Long Beach
Customers who need door hardware repair service often ask about these as well. Each can usually be handled in the same visit to Long Beach.
- Door Chain Installation
Installing door chains or secondary security locks.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Door Reinforcement
Adding security plates, reinforced strike plates, latch guards and door wrap plates.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Door Guard Installation
Installing flip guards, swing guards or security latches.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
Door Hardware Repair near Long Beach
We provide the same door hardware repair service in the communities around Long Beach. See the main door hardware repair page or the full list of service areas.
- Door Hardware Repair in Signal Hill
- Door Hardware Repair in Carson
- Door Hardware Repair in West Carson
- Door Hardware Repair in Lakewood
- Door Hardware Repair in Lomita
- Door Hardware Repair in Hawaiian Gardens
- Door Hardware Repair in Paramount
- Door Hardware Repair in Compton
- Door Hardware Repair in Bellflower
- Door Hardware Repair in Artesia
- Door Hardware Repair in Rolling Hills
- Door Hardware Repair in Rolling Hills Estates
Door Hardware Repair in Long Beach: frequently asked questions
Why does my door not latch anymore?
The latch and strike plate have moved out of alignment, most often because hinge screws have loosened and the door has dropped. Tightening or shimming the hinges and adjusting the strike restores the latch.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
Can you repair a door frame after a break-in?
Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Why do I have to push my door to lock it in Long Beach?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Can you make car keys in Long Beach?
Yes. We cut and program car keys on site anywhere in Long Beach, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Long Beach?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Long Beach, so you know the cost in advance.
Which parts of Long Beach do you serve?
All of Long Beach, including Downtown Long Beach, Belmont Shore, Naples, and Bixby Knolls, and addresses in ZIP codes 90802, 90803, 90804, 90805, 90806, and 90807.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
