Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Strike Plate Adjustment in Monrovia, CA

Big Daddy Car Key Replacement provides strike plate adjustment service throughout Monrovia. We come to you at any hour with the tools and parts to finish the job on site. Adjusting strike plates so doors latch and lock properly.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Strike Plate Adjustment in Monrovia, CA by Big Daddy Car Key Replacement

Quick answer

Strike Plate Adjustment: Adjusting strike plates so doors latch and lock properly. Big Daddy Car Key Replacement provides strike plate adjustment service in Monrovia as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Strike Plate Adjustment
Area
Monrovia, Los Angeles County, CA (91016)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

What strike plate adjustment means

Adjusting strike plates so doors latch and lock properly. The strike plate is the metal plate on the frame that receives the latch or bolt. If it sits a few millimetres off, the door rattles, will not latch, or the deadbolt binds. We reposition the plate, deepen the bolt pocket if it is too shallow, and secure it with long screws into the stud.

Strike Plate Adjustment in Monrovia, CA by Big Daddy Car Key Replacement
Strike Plate Adjustment in Monrovia: mobile service, carried out at your location.

Doors in Monrovia deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our strike plate adjustment service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.

Who we help in Monrovia

Door hardware calls in Monrovia come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in Monrovia.

Reasons to call for strike plate adjustment service

People in Monrovia usually call us for strike plate adjustment service in situations like these:

  • The door rattles when closed
  • The latch hits the plate instead of entering
  • The deadbolt only extends partway
  • Scrape marks show above or below the strike hole

Strike Plate Adjustment across Monrovia

Located in Los Angeles County, Monrovia is an incorporated city within our San Gabriel Valley service area. Customers anywhere in Monrovia, including Old Town Monrovia, North Monrovia, Station Square, the Huntington Drive corridor, and Gold Hills, can have a mobile technician sent directly to them. We serve the 91016 ZIP code.

Monrovia has hundreds of designated historic homes plus a tech and office corridor on Huntington Drive, so careful work on vintage mortise locks and modern commercial access systems are both called for.

Whether you are at home, at work, or stuck near Old Town Monrovia, Monrovia Canyon Park, Station Square and the Monrovia Metro station, Library Park, or the Aztec Hotel, tell the dispatcher the nearest landmark and we will find you. Monrovia is served by I-210, Huntington Drive, Foothill Boulevard, Myrtle Avenue, Mountain Avenue, and Duarte Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Our strike plate adjustment process, step by step

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Locksmith providing strike plate adjustment service in Monrovia, California
Our technicians work from fully equipped vans throughout Monrovia.

Common situations in Monrovia

  • A previous break-in left the jamb cracked around the strike.
  • The deadbolt only turns if you pull the door hard toward you.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • A latch has jammed and someone is stuck in a room.
  • The door drifts open by itself because the latch no longer catches.
  • The back door swings outward and its latch is visible through the gap.

What our technicians bring

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Trade terms explained

Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Strike plate
The plate on the frame that receives the latch or bolt.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.

How strike plate adjustment service is priced

Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Number of doors
Several doors in one visit cost less per door than separate calls.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.

We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.

Why call Big Daddy Car Key Replacement

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Door Hardware locksmith work in Monrovia, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.

Professional service compared with doing it yourself

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

Our service standards

Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.

Questions to ask any locksmith

  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Get an itemized receipt showing labor, parts and the business details.

What to have ready when you call

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

Once the work is done

Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.

Customers who need strike plate adjustment service often ask about these as well. Each can usually be handled in the same visit to Monrovia.

Strike Plate Adjustment near Monrovia

We provide the same strike plate adjustment service in the communities around Monrovia. See the main strike plate adjustment page or the full list of service areas.

Strike Plate Adjustment in Monrovia: frequently asked questions

How do I know if my strike plate is misaligned?

Look for shiny rub marks on the plate above or below the opening, or a bolt that stops short. Those marks show exactly how far the plate needs to move.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

Why do I have to push my door to lock it in Monrovia?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Can you repair a door frame after a break-in?

Yes. We fit jamb repair and reinforcement kits that restore strength to a split frame, and replace damaged locks and strikes in the same visit.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Can you make car keys in Monrovia?

Yes. We cut and program car keys on site anywhere in Monrovia, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Is there a travel charge for Monrovia?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Monrovia, so you know the cost in advance.

Are you open 24 hours in Monrovia?

Yes. We take calls and dispatch to Monrovia 24 hours a day, including weekends and holidays.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Which areas do you cover?

We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Call Now (562) 550-7206Open 24 hours · mobile locksmith