Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Monterey Park as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Monterey Park, Los Angeles County, CA (91754, 91755)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our electric strike installation service
- Who uses this service
- Signs you need electric strike installation service
- Electric Strike Installation across Monterey Park
- Our electric strike installation process, step by step
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- Cost factors for electric strike installation service
- Why Monterey Park customers choose Big Daddy
- Practical advice from our locksmiths
- Doing it yourself versus calling a professional
- Our service standards
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- Aftercare and records
- Related locksmith services in Monterey Park
- Electric Strike Installation near Monterey Park
- Electric Strike Installation in Monterey Park: frequently asked questions
About our electric strike installation service
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our electric strike installation service in Monterey Park takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Monterey Park range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Monterey Park.
Signs you need electric strike installation service
These are the most common reasons customers in Monterey Park ask for electric strike installation service:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Monterey Park
Monterey Park is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Customers anywhere in Monterey Park, including the Atlantic Boulevard corridor, the Garvey Avenue corridor, Monterey Highlands, the Garfield corridor, and the Monterey Pass business district, can have a mobile technician sent directly to them. That includes addresses in ZIP codes 91754 and 91755.
Monterey Park mixes hillside homes with condo developments and busy restaurant and retail plazas, where commercial storefront hardware and residential high-security locks are both popular.
People call us from all over Monterey Park, including the areas around East Los Angeles College, Atlantic Times Square, Barnes Park, Garvey Ranch Park, and Cascades Park. A landmark or cross street helps the technician reach you quickly. Monterey Park is served by I-10, SR-60, I-710, Atlantic Boulevard, Garvey Avenue, and Garfield Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Our electric strike installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- An apartment building wants to replace a shared entry key with fobs.
- A smart lock reports "jammed" every evening when the door swells.
- A homeowner wants to let a contractor in while at work.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- An office wants to stop rekeying each time an employee leaves.
- A business needs to know who entered the stockroom and when.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Audit trail
- A stored record of which credential opened a door and when.
Cost factors for electric strike installation service
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Monterey Park. The technician confirms the figure before starting.
Why Monterey Park customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Monterey Park.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.

Practical advice from our locksmiths
- Turn on two-factor authentication for any account that can unlock your door.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Keep firmware up to date. Updates often fix security issues.
- Give each person their own code or credential so access can be removed individually.
- Avoid obvious codes such as birth years, addresses or repeated digits.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Monterey Park
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Monterey Park.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Buzzer System Installation
Installing entry buzzers for offices, apartments and secured entrances.
- Intercom Lock Integration
Connecting locks with intercom systems for controlled entry.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Access Code Programming
Adding, removing or changing access codes.
- Magnetic Lock Installation
Installing maglocks for controlled entry doors.
- Audit Trail Lock Systems
Installing locks that track access history.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
Electric Strike Installation near Monterey Park
We provide the same electric strike installation service in the communities around Monterey Park. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Alhambra
- Electric Strike Installation in San Gabriel
- Electric Strike Installation in Rosemead
- Electric Strike Installation in Montebello
- Electric Strike Installation in East Los Angeles
- Electric Strike Installation in South Pasadena
- Electric Strike Installation in San Marino
- Electric Strike Installation in South El Monte
- Electric Strike Installation in Commerce
- Electric Strike Installation in Temple City
- Electric Strike Installation in El Monte
- Electric Strike Installation in Pico Rivera
Electric Strike Installation in Monterey Park: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which smart lock is best for a home in Monterey Park?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Do you have a locksmith shop in Monterey Park?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Monterey Park and the rest of the San Gabriel Valley area. All work is done at your location.
How long does it take a locksmith to reach me in Monterey Park?
It depends on where the nearest technician is and on traffic along I-10, SR-60, or I-710. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Monterey Park do you serve?
All of Monterey Park, including the Atlantic Boulevard corridor, the Garvey Avenue corridor, Monterey Highlands, and the Garfield corridor, and addresses in ZIP codes 91754 and 91755.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
