Quick answer
The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting. Big Daddy Car Key Replacement makes 2000 Dodge Durango keys on site in Oxnard, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2000 Dodge Durango
- Typical key
- Traditional metal key
- Transponder chip
- Usually no; varies
- Blade
- Edge-cut
- Programming
- Not normally required
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2000 Dodge Durango use?
- How we make a 2000 Dodge Durango key
- How Dodge key and immobilizer systems work
- Common Dodge key and lock problems
- All keys lost or just need a spare?
- Stranded with your Dodge right now?
- 2000 Dodge Durango key replacement across Oxnard
- Getting a 2000 Dodge Durango key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Dodge key?
- What affects the cost of a 2000 Dodge Durango key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Oxnard choose Big Daddy
- Looking after your Dodge key
- Choosing a car locksmith you can trust
- Other Dodge Durango years
- Other Dodge models
- Related automotive locksmith services in Oxnard
- 2000 Dodge Durango keys near Oxnard
- 2000 Dodge Durango key replacement in Oxnard: frequently asked questions
What kind of key does a 2000 Dodge Durango use?
The 2000 Dodge Durango typically uses a traditional edge-cut metal key with no transponder chip. Chip keys were being phased in around this model year, so equipment varies from car to car and we confirm yours before cutting.
Traditional metal key
A traditional key works purely mechanically. Cuts along the blade lift a row of wafers inside the lock to the right height, the cylinder turns, and the car starts. There is no chip to program. Some vehicles of this period add a separate anti-theft layer, such as a resistor pellet in the key blade or a sensor in the ignition, that the key or lock must satisfy.

How we make a 2000 Dodge Durango key
For the 2000 Dodge Durango we cut the key by code where a code is available, or decode a door or ignition lock to read the cuts directly. The key is cut on a code machine to original depths, then tested in the door, ignition and trunk. If the car uses a resistor-type key, we measure the correct value and use the matching blank. With the vehicle in front of us, a mechanical key is typically finished in 15 to 30 minutes, a little longer when locks are worn and need decoding by hand.
This page covers the 2000 model year. For other years, see the Dodge Durango key replacement overview, or browse all Dodge models.
How Dodge key and immobilizer systems work
Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.
Dodge keys progressed from plain metal keys to Sentry Key transponders, then Fobik pod keys in 2008, and proximity fobs on performance and family models from 2011. Charger and Challenger theft has made correct, secure programming especially important.
Common Dodge key and lock problems
These are the issues we see most often on Dodge vehicles in Oxnard:
- Fobik keys that are not recognized because of a worn wireless ignition node
- "Key not detected" messages on push-button models with a weak fob battery
- Lost keys on vehicles protected by the secure gateway, which defeats generic tools
- Worn door and ignition wafers on older Wranglers and Cherokees
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Dodge right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
2000 Dodge Durango key replacement across Oxnard
Oxnard is an incorporated city in Ventura County, part of the area we cover every day. Our Dodge key replacement service reaches all of Oxnard, including RiverPark, Downtown Oxnard, Silver Strand, Hollywood Beach, Mandalay Bay, La Colonia, South Oxnard, and Sea View Estates, as well as the streets in between. You do not need to bring anything to a shop. Service is available throughout ZIP codes 93030, 93033, 93035, and 93036.
Oxnard is Ventura County’s largest city, combining a working harbor, beach neighborhoods, agricultural operations and a major auto center, so marine keys, farm equipment locks and car key programming all apply.
People call us from all over Oxnard, including the areas around Channel Islands Harbor, The Collection at RiverPark, Heritage Square, the Oxnard Auto Center, and the Oxnard Transit Center. A landmark or cross street helps the technician reach you quickly. Oxnard is served by US-101, Pacific Coast Highway, Rice Avenue, Rose Avenue, Ventura Road, and Victoria Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
Getting a 2000 Dodge Durango key made, step by step
Call with the year, make and model
Tell us you need a key for a 2000 Dodge Durango, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Dodge key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2000 Dodge Durango key
- Model year and system generation
- Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Mechanical keys are the least expensive car keys to replace. Price depends on whether a working key exists to copy, whether locks must be decoded, and whether worn wafers need attention so the new key turns smoothly. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Proximity key
- A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Situations we are called to most often
- The key is locked in the trunk and the trunk release is disabled.
- The dash reads "key not detected" and the start button does nothing.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A used car was sold with one worn key and no spare.
- The key fob went through the washing machine.
Why drivers in Oxnard choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Oxnard.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Looking after your Dodge key
Older locks wear together with their keys. If your key only works with a jiggle, ask for a key cut to code and have the ignition serviced before it leaves you stranded.
- Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
- Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
Choosing a car locksmith you can trust
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
Other Dodge Durango years
- 2026 Durango
- 2025 Durango
- 2024 Durango
- 2023 Durango
- 2022 Durango
- 2021 Durango
- 2020 Durango
- 2019 Durango
- 2018 Durango
- 2017 Durango
- 2016 Durango
- 2015 Durango
- 2014 Durango
- 2013 Durango
- 2012 Durango
- 2011 Durango
- 2010 Durango
- 2009 Durango
- 2008 Durango
- 2007 Durango
- 2006 Durango
- 2005 Durango
- 2004 Durango
- 2003 Durango
- 2002 Durango
- 2001 Durango
- 1999 Durango
- 1998 Durango
Other Dodge models
- Dodge Grand Caravan keys
- Dodge Viper keys
- Dodge Dakota keys
- Dodge Charger keys
- Dodge Caravan keys
- Dodge Ram 1500 keys
- Dodge Ram 2500 keys
- Dodge Challenger keys
- Dodge Avenger keys
- Dodge Intrepid keys
- Dodge Journey keys
- Dodge Stratus keys
- Dodge Neon keys
Related automotive locksmith services in Oxnard
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Fleet Vehicle Locksmith
Key replacement, lockouts, rekeys and key duplication for business fleets.
- Boat Key Replacement
Replacing keys for boat ignitions, compartments and storage locks.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Semi-Truck Locksmith
Lockouts, key replacement, ignition repair and fleet key services for commercial trucks.
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
2000 Dodge Durango keys near Oxnard
We make 2000 Dodge Durango keys in the communities around Oxnard as well. See the main 2000 Dodge Durango key replacement page or the Oxnard locksmith page.
- 2000 Dodge Durango keys in Port Hueneme
- 2000 Dodge Durango keys in Ventura
- 2000 Dodge Durango keys in Camarillo
- 2000 Dodge Durango keys in Santa Paula
- 2000 Dodge Durango keys in Ojai
- 2000 Dodge Durango keys in Moorpark
- 2000 Dodge Durango keys in Thousand Oaks
- 2000 Dodge Durango keys in Fillmore
- 2000 Dodge Durango keys in Westlake Village
- 2000 Dodge Durango keys in Simi Valley
- 2000 Dodge Durango keys in Agoura Hills
- 2000 Dodge Durango keys in Malibu
2000 Dodge Durango key replacement in Oxnard: frequently asked questions
Does a 2000 Dodge Durango key need programming?
A plain mechanical key does not. It only needs to be cut correctly. If your particular car was built with a chip or resistor key, we identify that on site and supply the right type.
Can any hardware store copy my 2000 Dodge Durango key?
If you have a good original and the car has no chip or resistor in the key, a store copy may work. Copies of worn keys often work poorly, which is why cutting by code gives a better result.
My Dodge key turns in the door but not the ignition. Why?
The ignition has more wear than the doors, or it was replaced at some point and keyed differently. We can repair or rekey the ignition so one key works everywhere.
Do I need a PIN code to program a Dodge key?
Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.
Can you program keys for a 2018 or newer Dodge with the secure gateway?
Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.
Do I have to tow my 2000 Dodge Durango to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Can you make a key for a 2000 Dodge Durango if I have lost every key?
In most cases, yes. We cut a new key from the VIN-based code or by reading the lock, then program it to the vehicle on site. A few late-model systems require a dealer-supplied key, and we tell you that before scheduling.
Do you also repair the ignition on a 2000 Dodge Durango?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
Will my lost 2000 Dodge Durango key still start the car?
For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.
Can you make a 2000 Dodge Durango key at night or on a weekend?
Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.
Is there a travel charge for Oxnard?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Oxnard, so you know the cost in advance.
Do you have a locksmith shop in Oxnard?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Oxnard and the surrounding communities. All work is done at your location.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
