Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

2000 Ford Excursion Key Replacement in Pasadena, CA

Big Daddy Car Key Replacement makes 2000 Ford Excursion keys on site in Pasadena. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
2000 Ford Excursion Key Replacement in Pasadena, CA by Big Daddy Car Key Replacement

Quick answer

The 2000 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2000 Ford Excursion keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.

Last updated

Vehicle
2000 Ford Excursion
Typical key
Transponder chip key
Transponder chip
Yes
Blade
Edge-cut
Programming
Required, done on site
Hours
Open 24 hours, 7 days a week
Phone
(562) 550-7206
On this page

What kind of key does a 2000 Ford Excursion use?

The 2000 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.

Transponder chip key

A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

2000 Ford Excursion key replacement in Pasadena
Transponder chip key for a 2000 Ford Excursion, made on site in Pasadena.

How we make a 2000 Ford Excursion key

For the 2000 Ford Excursion we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.

This page covers the 2000 model year. For other years, see the Ford Excursion key replacement overview, or browse all Ford models.

How Ford key and immobilizer systems work

Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.

Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.

Common Ford key and lock problems

These are the issues we see most often on Ford vehicles in Pasadena:

  • A rapidly flashing theft light and no start after using an unprogrammed copy
  • Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
  • Remote-head keys whose buttons wear through
  • Door keypad codes that owners have forgotten or never learned

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Ford right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

2000 Ford Excursion key replacement across Pasadena

Located in Los Angeles County, Pasadena is an incorporated city within our San Gabriel Valley service area. We cover every part of Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP codes 91101, 91103, 91104, 91105, 91106, and 91107.

Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.

People call us from all over Pasadena, including the areas around the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, and Pasadena City Hall. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Pasadena follows I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. You get a realistic arrival estimate when you call.

Getting a 2000 Ford Excursion key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a 2000 Ford Excursion, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a 2000 Ford Excursion key in Pasadena
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ford key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a 2000 Ford Excursion key

Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.

Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Key code
A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.

Situations we are called to most often

  • The key fob went through the washing machine.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • A used car was sold with one worn key and no spare.
  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Pasadena choose Big Daddy

Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Ford car key service in Pasadena
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ford key

The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.

  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.

Choosing a car locksmith you can trust

  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Get an itemized receipt showing labor, parts and the business details.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.

Other Ford Excursion years

Other Ford models

2000 Ford Excursion keys near Pasadena

We make 2000 Ford Excursion keys in the communities around Pasadena as well. See the main 2000 Ford Excursion key replacement page or the Pasadena locksmith page.

2000 Ford Excursion key replacement in Pasadena: frequently asked questions

Does my 2000 Ford Excursion key have a chip?

Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.

Can I program a 2000 Ford Excursion key myself?

Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.

Why does my Ford crank but not start with the new copy?

The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.

I have only one Ford key. Can I program a second one myself?

No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.

Why does programming a Ford key take ten minutes of waiting?

PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.

Does car insurance cover a replacement Ford key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

What do you need from me to make a 2000 Ford Excursion key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

How many keys should I have for my 2000 Ford Excursion?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Will my lost 2000 Ford Excursion key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Can you make a 2000 Ford Excursion key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Is there a travel charge for Pasadena?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pasadena, so you know the cost in advance.

Can you make car keys in Pasadena?

Yes. We cut and program car keys on site anywhere in Pasadena, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Call Now (562) 550-7206Open 24 hours · mobile locksmith