Quick answer
The 2003 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run. Big Daddy Car Key Replacement makes 2003 Ford Excursion keys on site in Pasadena, 24 hours a day. Call (562) 550-7206 for a price range.
Last updated
- Vehicle
- 2003 Ford Excursion
- Typical key
- Transponder chip key
- Transponder chip
- Yes
- Blade
- Edge-cut
- Programming
- Required, done on site
- Hours
- Open 24 hours, 7 days a week
- Phone
- (562) 550-7206
On this page
- What kind of key does a 2003 Ford Excursion use?
- How we make a 2003 Ford Excursion key
- How Ford key and immobilizer systems work
- Common Ford key and lock problems
- All keys lost or just need a spare?
- Stranded with your Ford right now?
- 2003 Ford Excursion key replacement across Pasadena
- Getting a 2003 Ford Excursion key made, step by step
- What to have ready
- Mobile locksmith or dealership for a Ford key?
- What affects the cost of a 2003 Ford Excursion key
- Lost keys and vehicle security
- Equipment we bring to the vehicle
- Car key terms explained
- Situations we are called to most often
- Why drivers in Pasadena choose Big Daddy
- Looking after your Ford key
- Choosing a car locksmith you can trust
- Other Ford Excursion years
- Other Ford models
- Related automotive locksmith services in Pasadena
- 2003 Ford Excursion keys near Pasadena
- 2003 Ford Excursion key replacement in Pasadena: frequently asked questions
What kind of key does a 2003 Ford Excursion use?
The 2003 Ford Excursion typically uses a transponder chip key: a edge-cut metal key with a coded chip in its head that the immobilizer must recognize before the engine will run.
Transponder chip key
A transponder key looks like an ordinary key with a plastic head, but the head holds a tiny chip with no battery. When you turn the ignition, an antenna ring around the lock energizes the chip and asks for its code. If the immobilizer recognizes the answer, it lets the engine run. If not, the engine cranks without starting or starts and dies within seconds.

How we make a 2003 Ford Excursion key
For the 2003 Ford Excursion we cut the blade to code, then program the chip. Where a working key exists, its data can often be cloned or used to authorize a new key quickly. When every key is lost, we connect to the car through the diagnostic port, obtain security access, and register new keys directly to the immobilizer. A spare transponder key is usually done in 15 to 30 minutes. An all-keys-lost job takes longer, commonly 30 to 60 minutes, because security access takes time on many systems.
This page covers the 2003 model year. For other years, see the Ford Excursion key replacement overview, or browse all Ford models.
How Ford key and immobilizer systems work
Ford, Lincoln and Mercury use PATS, the Passive Anti-Theft System. A transponder in the key head must be registered in the car’s computer. Many models let an owner add a third key if two programmed keys are present; with one or none, diagnostic access is needed and there is often a built-in ten-minute security wait. Later models add integrated remote-head keys, laser-cut blades and Intelligent Access proximity fobs.
Ford’s PATS immobilizer arrived in 1996 and spread across the range by the early 2000s. Many Fords let you add a key yourself if you already have two working keys, which is the best reason to never be down to one.
Common Ford key and lock problems
These are the issues we see most often on Ford vehicles in Pasadena:
- A rapidly flashing theft light and no start after using an unprogrammed copy
- Ignition cylinders that jam on high-mileage Focus, Explorer and F-Series models
- Remote-head keys whose buttons wear through
- Door keypad codes that owners have forgotten or never learned
All keys lost or just need a spare?
How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.
Stranded with your Ford right now?
Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.
2003 Ford Excursion key replacement across Pasadena
Pasadena is an incorporated city in Los Angeles County, part of the San Gabriel Valley area we cover every day. Customers anywhere in Pasadena, including Old Pasadena, South Lake, the Playhouse Village, Bungalow Heaven, Linda Vista, Hastings Ranch, Madison Heights, and East Pasadena, can have a mobile technician sent directly to them. We serve the 91101, 91103, 91104, 91105, 91106, and 91107 ZIP codes.
Pasadena is famous for Craftsman architecture, and its landmark districts are full of original mortise locks and hand-fitted doors, alongside modern offices, labs and condos that need current commercial hardware.
Whether you are at home, at work, or stuck near the Rose Bowl, Old Pasadena, Caltech, the Norton Simon Museum, or Pasadena City Hall, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Pasadena by I-210, SR-134, SR-110, Colorado Boulevard, Lake Avenue, and Fair Oaks Avenue. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Getting a 2003 Ford Excursion key made, step by step
Call with the year, make and model
Tell us you need a key for a 2003 Ford Excursion, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.
We verify ownership
Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.
We identify the exact key system
Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.
The key is cut to code
The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.
The key is programmed to the car
For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.
Everything is tested before we leave
We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

What to have ready
- A government-issued photo ID
- The vehicle registration, title or current insurance card in your name
- The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
- Any remaining keys or remotes, including ones that no longer work
- The vehicle itself, parked where a technician can open the driver’s door fully
Mobile locksmith or dealership for a Ford key?
| Mobile locksmith | Dealership | |
|---|---|---|
| Where the work happens | At your vehicle, wherever it is parked | At the dealer’s service department |
| Towing with all keys lost | Not needed | Usually required |
| Availability | Open 24 hours, including weekends and holidays | Service department business hours |
| Typical wait | Often the same day | Appointment, plus time to order the key by VIN |
| Key options | OEM or quality aftermarket where available | OEM only |
| Restricted late-model systems | Some require a dealer key; we tell you up front | Supported |
A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.
What affects the cost of a 2003 Ford Excursion key
- Lock or ignition condition
- If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
- OEM or aftermarket parts
- Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
- Key technology
- A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
- Whether a working key exists
- Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
- Time and location
- Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Price depends on the chip type, whether you still have a working key, and how the vehicle grants programming access. Adding a spare while one key still works is always the cheaper job. Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.
Lost keys and vehicle security
Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.
Equipment we bring to the vehicle
Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.
Car key terms explained
- Diagnostic port
- The connector under the dashboard through which keys are programmed to the vehicle’s computer.
- Laser-cut key
- A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
- VIN
- The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
- All keys lost
- A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
- Key code
- A number that defines the exact cuts of a key, allowing it to be cut to factory specification without an original.
- Remote head key
- A key with the lock and unlock buttons built into its head, alongside the blade and chip.
- Transponder
- A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Situations we are called to most often
- The key fob went through the washing machine.
- The only key to the car is lost somewhere between the beach, the restaurant and home.
- A hardware-store copy opens the door but the engine will not start.
- The ignition will not turn and the key will not come out.
- A used car was sold with one worn key and no spare.
Why drivers in Pasadena choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Pasadena.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.

Looking after your Ford key
The chip is durable but not indestructible. Keys that have been crushed, soaked or overheated can keep turning the lock while no longer starting the car. Keep a programmed spare somewhere safe.
- Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
- Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
- Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
- Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
- Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
- When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
- If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
Choosing a car locksmith you can trust
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
Other Ford Excursion years
Other Ford models
- Ford E-350 keys
- Ford F-150 keys
- Ford Mustang keys
- Ford Explorer keys
- Ford Expedition keys
- Ford Ranger keys
- Ford Taurus keys
- Ford F-250 Super Duty keys
- Ford F-350 Super Duty keys
- Ford Escape keys
- Ford E-150 keys
- Ford E-250 keys
- Ford Crown Victoria keys
- Ford Focus keys
Related automotive locksmith services in Pasadena
- Ignition Replacement
Replacing damaged or failed ignition cylinders.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Trunk Lockout Service
Opening locked trunks when keys are lost or locked inside.
- Car Door Lock Repair
Repairing vehicle door lock cylinders and mechanisms.
- Remote Head Key Replacement
Replacing keys with built-in remote buttons.
- Laser Cut Key
Cutting high-security sidewinder/laser-cut keys.
- Car Key Cutting
Cutting standard, high-security and laser-cut automotive keys.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
2003 Ford Excursion keys near Pasadena
We make 2003 Ford Excursion keys in the communities around Pasadena as well. See the main 2003 Ford Excursion key replacement page or the Pasadena locksmith page.
- 2003 Ford Excursion keys in South Pasadena
- 2003 Ford Excursion keys in San Marino
- 2003 Ford Excursion keys in Altadena
- 2003 Ford Excursion keys in Alhambra
- 2003 Ford Excursion keys in San Gabriel
- 2003 Ford Excursion keys in La Cañada Flintridge
- 2003 Ford Excursion keys in Sierra Madre
- 2003 Ford Excursion keys in Temple City
- 2003 Ford Excursion keys in Monterey Park
- 2003 Ford Excursion keys in Rosemead
- 2003 Ford Excursion keys in Arcadia
- 2003 Ford Excursion keys in Glendale
2003 Ford Excursion key replacement in Pasadena: frequently asked questions
Does my 2003 Ford Excursion key have a chip?
Most were built with a transponder chip in the key head. A security light on the dash, or a plain metal copy that turns the ignition without starting the engine, confirms it. We verify on site before cutting.
Can I program a 2003 Ford Excursion key myself?
Some vehicles allow a new key to be added using one or two existing programmed keys and a timed ignition sequence. With no working key, or on systems without that feature, diagnostic equipment is required.
Why does my Ford crank but not start with the new copy?
The copy was cut but never programmed, so the immobilizer does not recognize it. The blade is fine; the chip needs to be registered to the car or replaced with the correct type.
I have only one Ford key. Can I program a second one myself?
No. The self-programming procedure requires two working keys. With one key, a locksmith or dealer must add the spare with a diagnostic tool, which is still quicker and cheaper than replacing all keys later.
Why does programming a Ford key take ten minutes of waiting?
PATS enforces a timed security delay before it grants programming access on many models. It is normal and built into the system.
Do I have to tow my 2003 Ford Excursion to you?
No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.
Do you also repair the ignition on a 2003 Ford Excursion?
Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.
What do you need from me to make a 2003 Ford Excursion key?
A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.
Can you program a key I bought online for my 2003 Ford Excursion?
We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.
How many keys should I have for my 2003 Ford Excursion?
At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.
Is there a travel charge for Pasadena?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Pasadena, so you know the cost in advance.
Do you have a locksmith shop in Pasadena?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Pasadena and the rest of the San Gabriel Valley area. All work is done at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
