Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Rolling Hills as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Rolling Hills, Los Angeles County, CA (90274)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation means
- Who we help in Rolling Hills
- Signs you need electric strike installation service
- Electric Strike Installation across Rolling Hills
- Our electric strike installation process, step by step
- Typical calls we receive
- What our technicians bring
- Terms worth knowing
- What affects the cost of electric strike installation service
- Why call Big Daddy Car Key Replacement
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- What we commit to
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Rolling Hills
- Electric Strike Installation near Rolling Hills
- Electric Strike Installation in Rolling Hills: frequently asked questions
What electric strike installation means
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

Codes, cards, fobs and phones have made keys optional. For electric strike installation service in Rolling Hills, call (562) 550-7206. We help you choose equipment that fits the door and the way people use it, install it, and make sure there is always a way in if batteries or power fail.
Who we help in Rolling Hills
Electronic lock and access control customers in Rolling Hills range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Rolling Hills.
Signs you need electric strike installation service
People in Rolling Hills usually call us for electric strike installation service in situations like these:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Rolling Hills
Rolling Hills is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Customers anywhere in Rolling Hills, including the Portuguese Bend Road area, the Crest Road area, the Eastfield area, and Saddleback, can have a mobile technician sent directly to them. That includes addresses in ZIP code 90274.
Rolling Hills is an entirely gated city of single-story ranch estates on large equestrian lots, so visits are cleared at the gatehouse and usually involve whole-property rekeys, gate locks, barns and safes.
If you are out and about near the three guarded gatehouses, the city’s bridle trails, the Rolling Hills City Hall campus, or the white three-rail ranch fences, give us that location when you call and wait somewhere safe and visible. Technicians usually reach Rolling Hills by Portuguese Bend Road, Crest Road, Eastfield Drive, Saddleback Road, and Palos Verdes Drive North. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our electric strike installation process, step by step
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A smart lock reports "jammed" every evening when the door swells.
- A short-term rental needs a new code for every guest.
- Children get home from school before their parents and keep losing keys.
- An office wants to stop rekeying each time an employee leaves.
- A homeowner wants to let a contractor in while at work.
- A business needs to know who entered the stockroom and when.
- An apartment building wants to replace a shared entry key with fobs.
What our technicians bring
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
Terms worth knowing
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Audit trail
- A stored record of which credential opened a door and when.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
What affects the cost of electric strike installation service
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Rolling Hills. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Rolling Hills.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.

Practical advice from our locksmiths
- Keep the mechanical override key somewhere accessible outside the locked area.
- Give each person their own code or credential so access can be removed individually.
- Keep firmware up to date. Updates often fix security issues.
- Use fresh, name-brand alkaline batteries. Many locks misread rechargeable cells.
- Delete factory default codes on the day of installation.
- Turn on two-factor authentication for any account that can unlock your door.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Rolling Hills
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Rolling Hills.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Wi-Fi Lock Installation
Installing Wi-Fi-enabled locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Commercial Smart Lock Installation
Installing electronic and app-controlled locks for businesses.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Access Code Programming
Adding, removing or changing access codes.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Business Lockout
Unlocking offices, storefronts, warehouses, restaurants, retail stores and commercial buildings.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
Electric Strike Installation near Rolling Hills
We provide the same electric strike installation service in the communities around Rolling Hills. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in Rancho Palos Verdes
- Electric Strike Installation in Rolling Hills Estates
- Electric Strike Installation in Lomita
- Electric Strike Installation in Palos Verdes Estates
- Electric Strike Installation in Torrance
- Electric Strike Installation in West Carson
- Electric Strike Installation in Carson
- Electric Strike Installation in Redondo Beach
- Electric Strike Installation in Hermosa Beach
- Electric Strike Installation in Lawndale
- Electric Strike Installation in Long Beach
- Electric Strike Installation in Manhattan Beach
Electric Strike Installation in Rolling Hills: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Which smart lock is best for a home in Rolling Hills?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Which parts of Rolling Hills do you serve?
All of Rolling Hills, including the Portuguese Bend Road area, the Crest Road area, the Eastfield area, and Saddleback, and addresses in ZIP code 90274.
Can you make car keys in Rolling Hills?
Yes. We cut and program car keys on site anywhere in Rolling Hills, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Do you have a locksmith shop in Rolling Hills?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Rolling Hills and the rest of the South Bay area. All work is done at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
