Quick answer
Electric Strike Installation: Installing electric strikes for buzz-in entry systems. Big Daddy Car Key Replacement provides electric strike installation service in Lomita as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Electric Strike Installation
- Area
- Lomita, Los Angeles County, CA (90717)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- What electric strike installation means
- Who we help in Lomita
- When you need electric strike installation service
- Electric Strike Installation across Lomita
- How our electric strike installation service works
- Situations we handle regularly
- Equipment and hardware on the van
- A short glossary
- What affects the cost of electric strike installation service
- Why call Big Daddy Car Key Replacement
- Advice worth knowing
- Doing it yourself versus calling a professional
- How we work on every job
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in Lomita
- Electric Strike Installation near Lomita
- Electric Strike Installation in Lomita: frequently asked questions
What electric strike installation means
Installing electric strikes for buzz-in entry systems. An electric strike replaces the fixed strike in the frame with one whose keeper releases electrically, letting the door be pushed open while the lock stays locked. It works with your existing lockset or exit device, keeps the door latched during a power loss when set fail-secure, and is the standard choice for buzz-in doors.

Electronic locks replace the question "who has a key?" with a list you control. Our electric strike installation service in Lomita covers the whole range, from a single keypad deadbolt on a front door to networked readers on a commercial building, installed correctly and set up so you can manage it yourself.
Who we help in Lomita
Electronic lock and access control customers in Lomita range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Lomita.
When you need electric strike installation service
People in Lomita usually call us for electric strike installation service in situations like these:
- You want to buzz visitors in from a desk
- An access system is being added to an existing lock
- The door must stay locked if power fails
- A panic-bar door needs electric release
Electric Strike Installation across Lomita
Lomita is an incorporated city in Los Angeles County, part of the South Bay area we cover every day. Our electric strike installation service reaches all of Lomita, including the Narbonne Avenue corridor, the Lomita Boulevard corridor, the Pacific Coast Highway corridor, and the hillside streets below Palos Verdes, as well as the streets in between. You do not need to bring anything to a shop. We serve the 90717 ZIP code.
Lomita is a small residential city at the foot of the Palos Verdes hills, with older single-family homes and small businesses that favor straightforward, durable lock repairs and rekeys.
If you are out and about near the Lomita Railroad Museum, Lomita Park, the neighboring Zamperini Field, or the Pacific Coast Highway business strip, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Lomita follows Pacific Coast Highway, Lomita Boulevard, Narbonne Avenue, Western Avenue, Crenshaw Boulevard, and Eshelman Avenue. You get a realistic arrival estimate when you call.
How our electric strike installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- Children get home from school before their parents and keep losing keys.
- A smart lock reports "jammed" every evening when the door swells.
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
- A business needs to know who entered the stockroom and when.
- A short-term rental needs a new code for every guest.
- A homeowner wants to let a contractor in while at work.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Audit trail
- A stored record of which credential opened a door and when.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
What affects the cost of electric strike installation service
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Grade of hardware
- Commercial Grade 1 electronic locks cost more than residential models and are built for far heavier use.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Lomita. The technician confirms the figure before starting.
Why call Big Daddy Car Key Replacement
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Lomita.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.

Advice worth knowing
- Give each person their own code or credential so access can be removed individually.
- Review the user list every few months and remove anyone who no longer needs access.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Delete factory default codes on the day of installation.
- Turn on two-factor authentication for any account that can unlock your door.
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Avoid obvious codes such as birth years, addresses or repeated digits.
Doing it yourself versus calling a professional
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
How we work on every job
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Get an itemized receipt showing labor, parts and the business details.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Lomita
Customers who need electric strike installation service often ask about these as well. Each can usually be handled in the same visit to Lomita.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Keypad Lock Programming
Adding, changing or deleting access codes for homeowners, family members, renters, cleaners and contractors.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Access Code Programming
Adding, removing or changing access codes.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Key Fob Access Systems
Installing and programming key fob systems.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Smart Lock Setup
Programming smart locks, connecting apps, setting user codes, deleting old codes and troubleshooting connectivity.
- Key Card Access Systems
Installing card reader systems for controlled entry.
- Electronic Lock Installation
Installing electronic locks for homes and businesses.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Locksmith Near Me
A local mobile locksmith dispatched to your location across Los Angeles, Ventura and Orange County.
- Car Lockout
Unlocking vehicles when keys are locked inside.
- Car Locksmith
On-site car key, lockout and ignition help wherever the vehicle is parked.
Electric Strike Installation near Lomita
We provide the same electric strike installation service in the communities around Lomita. See the main electric strike installation page or the full list of service areas.
- Electric Strike Installation in West Carson
- Electric Strike Installation in Rolling Hills Estates
- Electric Strike Installation in Rolling Hills
- Electric Strike Installation in Carson
- Electric Strike Installation in Torrance
- Electric Strike Installation in Palos Verdes Estates
- Electric Strike Installation in Rancho Palos Verdes
- Electric Strike Installation in Redondo Beach
- Electric Strike Installation in Gardena
- Electric Strike Installation in Hermosa Beach
- Electric Strike Installation in Lawndale
- Electric Strike Installation in Long Beach
Electric Strike Installation in Lomita: frequently asked questions
What is the difference between an electric strike and a maglock?
An electric strike releases the latch of a normal lock and can stay locked without power. A maglock holds the door with a magnet and always unlocks when power is lost.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which smart lock is best for a home in Lomita?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can access be limited to certain days and times?
Yes. Most smart locks and all access control systems support schedules, temporary codes and automatic expiry.
Are you open 24 hours in Lomita?
Yes. We take calls and dispatch to Lomita 24 hours a day, including weekends and holidays.
How long does it take a locksmith to reach me in Lomita?
It depends on where the nearest technician is and on traffic along Pacific Coast Highway, Lomita Boulevard, or Narbonne Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Do you have a locksmith shop in Lomita?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Lomita and the rest of the South Bay area. All work is done at your location.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
How do I get a price?
Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
