Quick answer
Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in San Fernando as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Repair
- Area
- San Fernando, Los Angeles County, CA (91340)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What deadbolt repair involves
- Customers we serve in San Fernando
- Reasons to call for deadbolt repair service
- Deadbolt Repair across San Fernando
- How our deadbolt repair service works
- Typical calls we receive
- Tools, parts and hardware we carry
- Terms worth knowing
- How deadbolt repair service is priced
- Why San Fernando customers choose Big Daddy
- Advice worth knowing
- Why this is a job for a locksmith
- Our service standards
- Questions to ask any locksmith
- How to prepare for the visit
- Once the work is done
- Related locksmith services in San Fernando
- Deadbolt Repair near San Fernando
- Deadbolt Repair in San Fernando: frequently asked questions
What deadbolt repair involves
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Your locks are only as good as their condition and the keys in circulation. Our deadbolt repair service in San Fernando deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Customers we serve in San Fernando
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in San Fernando. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in San Fernando.
Reasons to call for deadbolt repair service
People in San Fernando usually call us for deadbolt repair service in situations like these:
- You have to push or pull the door to lock it
- The key turns but the bolt does not move
- The thumbturn is stiff or spins freely
- The deadbolt will not extend all the way
Deadbolt Repair across San Fernando
San Fernando is an incorporated city in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of San Fernando, including the San Fernando Mall district, the Maclay Avenue corridor, the Truman Street corridor, and the residential blocks around Recreation Park. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP code 91340.
San Fernando is an independent city surrounded by Los Angeles, with a walkable historic downtown and early-1900s homes where storefront locks, security gates and older residential hardware are common jobs.
If you are out and about near the San Fernando Mall, the Lopez Adobe, the César E. Chávez Memorial, San Fernando Recreation Park, or the Sylmar/San Fernando Metrolink station, give us that location when you call and wait somewhere safe and visible. San Fernando is served by I-5, SR-118, I-210, I-405, San Fernando Road, and Maclay Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our deadbolt repair service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- Each door in the house takes a different key and the ring keeps growing.
- A roommate, partner or tenant has moved out and still has a key.
- A handbag with house keys and a driver’s license was stolen from a car.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
Tools, parts and hardware we carry
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Terms worth knowing
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Keyed alike
- Several locks set to operate with the same key.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
How deadbolt repair service is priced
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to San Fernando. The technician confirms the figure before starting.
Why San Fernando customers choose Big Daddy
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to San Fernando.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Advice worth knowing
- Rekey as soon as you get the keys to a new home. Builders, agents, cleaners and previous owners may all have copies.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Once the work is done
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in San Fernando
Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to San Fernando.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Lost House Key Service
Rekeying or replacing locks when house keys are lost or stolen.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Apartment Lockout
Unlocking apartment unit doors for tenants who are locked out, day or night.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Lock Replacement
Replacing old, damaged, outdated or unsecured locks with new locks.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Transponder Key Programming
Programming chip keys for vehicles with immobilizer systems.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
Deadbolt Repair near San Fernando
We provide the same deadbolt repair service in the communities around San Fernando. See the main deadbolt repair page or the full list of service areas.
- Deadbolt Repair in Pacoima
- Deadbolt Repair in Sylmar
- Deadbolt Repair in Mission Hills
- Deadbolt Repair in Arleta
- Deadbolt Repair in Granada Hills
- Deadbolt Repair in Panorama City
- Deadbolt Repair in North Hills
- Deadbolt Repair in Lake View Terrace
- Deadbolt Repair in Sun Valley
- Deadbolt Repair in Van Nuys
- Deadbolt Repair in Valley Glen
- Deadbolt Repair in Lake Balboa
Deadbolt Repair in San Fernando: frequently asked questions
Why do I have to lift my door to lock the deadbolt?
The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Should I rekey or replace the locks in my San Fernando home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Which parts of San Fernando do you serve?
All of San Fernando, including the San Fernando Mall district, the Maclay Avenue corridor, the Truman Street corridor, and the residential blocks around Recreation Park, and addresses in ZIP code 91340.
Do you have a locksmith shop in San Fernando?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout San Fernando and the rest of the San Fernando Valley area. All work is done at your location.
How long does it take a locksmith to reach me in San Fernando?
It depends on where the nearest technician is and on traffic along I-5, SR-118, or I-210. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
