Quick answer
Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in Sylmar as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Repair
- Area
- Sylmar, Los Angeles County, CA (91342)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- What deadbolt repair involves
- Who uses this service
- Signs you need deadbolt repair service
- Deadbolt Repair across Sylmar
- How our deadbolt repair service works
- Situations we handle regularly
- Tools, parts and hardware we carry
- Trade terms explained
- What affects the cost of deadbolt repair service
- Why Sylmar customers choose Big Daddy
- Tips to avoid problems
- Professional service compared with doing it yourself
- What we commit to
- Questions to ask any locksmith
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Sylmar
- Deadbolt Repair near Sylmar
- Deadbolt Repair in Sylmar: frequently asked questions
What deadbolt repair involves
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Most people think about their locks only when something goes wrong. Whether it is a lost key, a sticky deadbolt or a new house with unknown key holders, our deadbolt repair service in Sylmar is meant to be simple: one call to (562) 550-7206, one visit, and doors that lock properly.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Sylmar. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Sylmar.
Signs you need deadbolt repair service
These are the most common reasons customers in Sylmar ask for deadbolt repair service:
- You have to push or pull the door to lock it
- The key turns but the bolt does not move
- The thumbturn is stiff or spins freely
- The deadbolt will not extend all the way
Deadbolt Repair across Sylmar
Sylmar is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Our deadbolt repair service reaches all of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91342 ZIP code.
Sylmar is the northernmost neighborhood in Los Angeles, with large lots, manufactured-home communities and newer tract developments, plus several freeway interchanges where stranded drivers call for lockouts and lost keys.
People call us from all over Sylmar, including the areas around Olive View–UCLA Medical Center, Los Angeles Mission College, El Cariso Community Regional Park, and the Nethercutt Museum. A landmark or cross street helps the technician reach you quickly. Technicians usually reach Sylmar by I-5, I-210, SR-118, I-405, Foothill Boulevard, and Glenoaks Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our deadbolt repair service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Situations we handle regularly
- A handbag with house keys and a driver’s license was stolen from a car.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A roommate, partner or tenant has moved out and still has a key.
- Each door in the house takes a different key and the ring keeps growing.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A back door has only a locking knob, which can be slipped or forced in seconds.
- An older parent is having trouble with a round knob and needs lever handles.
Tools, parts and hardware we carry
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
Trade terms explained
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Keyed alike
- Several locks set to operate with the same key.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
What affects the cost of deadbolt repair service
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Scheduling
- Planned daytime appointments are typically priced lower than urgent late-night calls.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Sylmar. The technician confirms the figure before starting.
Why Sylmar customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Sylmar.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Tips to avoid problems
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- Have all compatible locks keyed alike. One key is easier to carry and easier to keep track of.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
Professional service compared with doing it yourself
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Get an itemized receipt showing labor, parts and the business details.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Sylmar
Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to Sylmar.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Tenant Move-Out Rekey
Rekeying locks after tenants move out to protect property owners and new occupants.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Lock Maintenance
Lubricating, adjusting, tightening and servicing locks to extend their life and improve operation.
- Door Knob Lock Installation
Installing keyed door knobs, privacy knobs, passage knobs and interior locking hardware.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- High-Security Lock Installation
Installing high-security locks designed to resist picking, drilling, bumping and unauthorized key duplication.
- Lock Repair
Repairing locks that are sticky, jammed, loose, misaligned or difficult to operate.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Commercial Locksmith
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings.
- Key Fob Replacement
Replacing remote key fobs for cars, trucks, SUVs and vans.
Deadbolt Repair near Sylmar
We provide the same deadbolt repair service in the communities around Sylmar. See the main deadbolt repair page or the full list of service areas.
- Deadbolt Repair in San Fernando
- Deadbolt Repair in Pacoima
- Deadbolt Repair in Granada Hills
- Deadbolt Repair in Mission Hills
- Deadbolt Repair in Arleta
- Deadbolt Repair in Lake View Terrace
- Deadbolt Repair in North Hills
- Deadbolt Repair in Panorama City
- Deadbolt Repair in Porter Ranch
- Deadbolt Repair in Northridge
- Deadbolt Repair in Sun Valley
- Deadbolt Repair in Santa Clarita
Deadbolt Repair in Sylmar: frequently asked questions
Why do I have to lift my door to lock the deadbolt?
The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Should I rekey or replace the locks in my Sylmar home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
Do you provide service for landlords and tenants?
Yes. We rekey between tenants, handle tenant lockouts with proper verification, and replace mailbox locks. Tenants should check their lease before changing locks.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
Do you have a locksmith shop in Sylmar?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Sylmar and the rest of the San Fernando Valley area. All work is done at your location.
Which parts of Sylmar do you serve?
All of Sylmar, including the Foothill Boulevard corridor, the Olive View area, the equestrian lots near El Cariso, and the Hubbard Street corridor, and addresses in ZIP code 91342.
Are you open 24 hours in Sylmar?
Yes. We take calls and dispatch to Sylmar 24 hours a day, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
