Quick answer
Deadbolt Repair: Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Big Daddy Car Key Replacement provides deadbolt repair service in Porter Ranch as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Deadbolt Repair
- Area
- Porter Ranch, Los Angeles County, CA (91326)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Residential Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our deadbolt repair service
- Who uses this service
- Signs you need deadbolt repair service
- Deadbolt Repair across Porter Ranch
- How our deadbolt repair service works
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- How deadbolt repair service is priced
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- What we commit to
- Choosing a locksmith: a short checklist
- Before you call (562) 550-7206
- After the visit
- Related locksmith services in Porter Ranch
- Deadbolt Repair near Porter Ranch
- Deadbolt Repair in Porter Ranch: frequently asked questions
About our deadbolt repair service
Fixing deadbolts that are stuck, loose, misaligned, hard to turn or not locking properly. Most deadbolt problems are alignment problems. Houses settle, doors swell and hinges sag, so the bolt starts hitting the strike instead of entering it. We check the door’s swing first, then the bolt, tailpiece and cylinder, and correct the cause rather than filing away the strike until it barely holds.

Your locks are only as good as their condition and the keys in circulation. Our deadbolt repair service in Porter Ranch deals with both: hardware that works smoothly and keys that only the right people hold. A mobile technician comes to your home, looks at each door, explains the options in plain terms and completes most work in one visit.
Who uses this service
We work for homeowners, tenants, landlords, property managers, real estate agents and short-term rental hosts in Porter Ranch. New buyers want every lock rekeyed before moving in, landlords need quick turnovers between tenants, families want one key for the whole house, and older residents often ask for hardware that is easier to operate. Each has slightly different priorities, and we tailor the recommendation accordingly.
This service is part of our residential locksmith services in Porter Ranch.
Signs you need deadbolt repair service
People in Porter Ranch usually call us for deadbolt repair service in situations like these:
- You have to push or pull the door to lock it
- The key turns but the bolt does not move
- The thumbturn is stiff or spins freely
- The deadbolt will not extend all the way
Deadbolt Repair across Porter Ranch
Located in Los Angeles County, Porter Ranch is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. We cover every part of Porter Ranch, including Porter Ranch Estates, Renaissance, The Canyons, Westcliffe, and Bella Vista. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91326 ZIP code.
Porter Ranch is one of the newest parts of the Valley, with gated communities and builder-grade hardware that homeowners often upgrade to smart locks, keypad deadbolts and reinforced strike plates.
Whether you are at home, at work, or stuck near The Vineyards at Porter Ranch, Porter Ranch Town Center, Aliso Canyon Park, Limekiln Canyon Park, or Holleigh Bernson Memorial Park, tell the dispatcher the nearest landmark and we will find you. Technicians usually reach Porter Ranch by SR-118, Rinaldi Street, Tampa Avenue, Porter Ranch Drive, Mason Avenue, and Sesnon Boulevard. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
How our deadbolt repair service works
A short phone consultation
Tell us what is happening and how many doors are involved. From that we can usually give a price range and suggest whether rekeying, repair or replacement fits best.
On-site inspection
The technician looks at each lock, the door, the frame and the strike plate. Problems blamed on a lock are often caused by a sagging door or a loose strike, and it pays to find that first.
Clear options and a firm price
You hear what can be repaired, what should be replaced and what is optional, with a price for each, before any work begins.
The work is done at your door
Cylinders are rekeyed, locks installed or repaired, strikes reinforced and keys cut in the van outside. Most homes are finished in under two hours.
Every lock is tested with you
You try each key in each lock with the door open and closed. Bolts should extend fully and turn with two fingers.
Keys and advice are handed over
You receive the new keys, and we note anything worth watching, such as a worn hinge or a door that will need adjusting when the weather changes.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- Each door in the house takes a different key and the ring keeps growing.
- An older parent is having trouble with a round knob and needs lever handles.
- A handbag with house keys and a driver’s license was stolen from a car.
- You have just closed on a house and have no idea how many keys the previous owners handed out.
- A roommate, partner or tenant has moved out and still has a key.
- The front door deadbolt has become stiff and now needs a shoulder against the door to lock.
- A back door has only a locking knob, which can be slipped or forced in seconds.
Equipment and hardware on the van
Residential security in Southern California runs largely on two keyways, Kwikset KW1 and Schlage SC1, plus premium lines such as Baldwin, Emtek and Yale. Our vans carry rekeying pins for all of them, single- and double-cylinder deadbolts in common finishes, keyed entry knobs and levers, privacy and passage sets, latches, reinforced strike plates, door wrap plates and hinge screws. For higher security we install cylinders with hardened inserts and restricted keys.
A short glossary
- Keyed alike
- Several locks set to operate with the same key.
- ANSI/BHMA grade
- A performance rating for locks: Grade 1 is the strongest and most durable, Grade 2 is solid residential quality, Grade 3 is basic.
- Rekeying
- Replacing the pins in a lock cylinder so a new key works and previous keys do not, without changing the hardware.
- Keyway
- The shape of the slot a key slides into. Kwikset KW1 and Schlage SC1 are the most common in local homes.
- Deadbolt
- A lock whose solid bolt is moved only by a key or thumbturn, so it cannot be pushed back like a spring latch.
- Strike plate
- The metal plate on the door frame that the latch or bolt enters when the door is closed.
- Backset
- The distance from the door edge to the center of the lock hole, normally 2⅜ or 2¾ inches.
- Single and double cylinder
- A single-cylinder deadbolt has a key outside and a thumbturn inside; a double-cylinder model needs a key on both sides.
How deadbolt repair service is priced
- Rekey, repair or replace
- Rekeying is the least expensive, a repair usually sits in the middle, and new hardware costs the most. We recommend the cheapest option that solves the actual problem.
- Door preparation
- Fitting a lock to existing holes is quick. Boring a new door, enlarging old holes or repairing a damaged edge takes additional time.
- Number of locks
- Rekeying and installation are priced per lock, with the service call covering the visit. Doing every door in one visit costs less per lock than separate trips.
- Smart or electronic features
- Keypad and smart locks cost more than mechanical ones and take longer to set up, especially when the door needs aligning so the motor can throw the bolt.
- Grade and brand of hardware
- A Grade 1 deadbolt costs more than Grade 3, and high-security or designer hardware more again. The front and back doors are where better hardware pays off.
- Condition of door and frame
- A split jamb, stripped hinge screws or a swollen door has to be corrected for a lock to work properly, and that adds labor.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Porter Ranch.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Practical advice from our locksmiths
- When buying new hardware, check that the ANSI/BHMA grade is printed on the package.
- Do not hide a spare under a mat, a rock or a planter. Use a lock box or leave a key with a neighbor.
- Replace the short screws in strike plates and top hinges with three-inch screws that reach the wall framing.
- Keep a record of who holds keys. When that list becomes uncertain, it is time to rekey.
- Fit a deadbolt with a one-inch throw on every exterior door, including the door from the garage into the house.
- If a key begins to stick, have it looked at. Sticking is the usual warning before a lock fails completely.
- Add a secondary lock to sliding glass doors, and anti-lift blocks in the upper track.
- Use a dry graphite or PTFE lubricant in cylinders once a year. Avoid oil sprays, which collect grit.
Why this is a job for a locksmith
Installing or rekeying a lock looks simple in a video, and sometimes it is. The problems appear at the edges: a bolt that does not fully extend and therefore is not deadlocked, a strike held by half-inch screws, pins dropped during a rekey, a latch installed upside down. A locksmith does this work daily, carries the parts to correct what turns up, and leaves you with a door that has been tested under real conditions.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Choosing a locksmith: a short checklist
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
Before you call (562) 550-7206
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Porter Ranch
Customers who need deadbolt repair service often ask about these as well. Each can usually be handled in the same visit to Porter Ranch.
- Residential Locksmith
Complete lock and key service for houses, apartments, condos and rental properties.
- Rekey Locks
Resetting your existing locks to a new key so previous keys stop working, without replacing the hardware.
- Master Key System for Home
Creating one key that opens multiple selected locks in a home or property.
- Eviction Locksmith Service
Lock changing or rekeying after a legal eviction, usually coordinated with property managers or law enforcement.
- Door Handle Lock Repair
Repairing broken, loose, jammed or malfunctioning door handles and lever locks.
- Patio Door Lock Repair
Repairing or replacing sliding glass door locks, patio door latches and security bars.
- Security Door Lock Service
Installing, repairing and rekeying locks for security screen doors and metal security doors.
- Sliding Door Lock Repair
Fixing sliding door lock mechanisms, handles, rollers, latches and alignment issues.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Condo Locksmith Service
Lock services for condo units, shared entries, storage rooms and garage access doors.
- Key Duplication
Making spare keys for house doors, gates, mailboxes, padlocks, cabinets and more.
- Smart Lock Installation
Installing smart locks, keypad locks, Wi-Fi locks, Bluetooth locks, app-controlled locks and keyless entry systems.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
Deadbolt Repair near Porter Ranch
We provide the same deadbolt repair service in the communities around Porter Ranch. See the main deadbolt repair page or the full list of service areas.
- Deadbolt Repair in Granada Hills
- Deadbolt Repair in Chatsworth
- Deadbolt Repair in Northridge
- Deadbolt Repair in Winnetka
- Deadbolt Repair in North Hills
- Deadbolt Repair in Mission Hills
- Deadbolt Repair in Reseda
- Deadbolt Repair in Canoga Park
- Deadbolt Repair in Sylmar
- Deadbolt Repair in Lake Balboa
- Deadbolt Repair in San Fernando
- Deadbolt Repair in Panorama City
Deadbolt Repair in Porter Ranch: frequently asked questions
Why do I have to lift my door to lock the deadbolt?
The door has dropped out of alignment, usually from loose or worn hinges, so the bolt meets the strike plate too low. Tightening or shimming the hinges and resetting the strike normally fixes it without a new lock.
Do you need to see proof that I live here?
For lockouts and lock changes, yes. A photo ID with the address, a lease, a utility bill or closing documents are all acceptable.
What is the most secure type of front door lock?
A Grade 1 deadbolt with a hardened one-inch bolt, installed with a reinforced strike plate screwed into the wall stud. A high-security cylinder adds pick, bump and key-copy protection.
Can all my doors use the same key?
Yes, if the locks share a keyway or can be fitted with cylinders that do. Mixed brands can often be brought onto one key by swapping a cylinder or two.
Can you install locks I bought myself?
Yes. We install customer-supplied locks and check that they suit the door. If a lock is defective or the wrong size, we will tell you before fitting it.
What lock brands do you work with?
We service and install the common residential brands found in Southern California homes, including Schlage, Kwikset, Baldwin, Yale, Emtek and Weiser, along with high-security lines.
Should I rekey or replace the locks in my Porter Ranch home?
Rekey when the locks are in good condition and you simply need old keys to stop working. Replace when locks are worn, damaged, low grade, or you want new features. We look at each lock and tell you which makes sense.
How long does a typical residential job take?
A lockout takes minutes. Rekeying a house usually takes under an hour, and installing several new deadbolts one to two hours.
Do you have a locksmith shop in Porter Ranch?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Porter Ranch and the rest of the San Fernando Valley area. All work is done at your location.
Can you make car keys in Porter Ranch?
Yes. We cut and program car keys on site anywhere in Porter Ranch, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Porter Ranch?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Porter Ranch, so you know the cost in advance.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
