Quick answer
Door Guard Installation: Installing flip guards, swing guards or security latches. Big Daddy Car Key Replacement provides door guard installation service in San Marino as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Door Guard Installation
- Area
- San Marino, Los Angeles County, CA (91108)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Door Hardware Services
- Phone
- (562) 550-7206
On this page
- About our door guard installation service
- Who uses this service
- When you need door guard installation service
- Door Guard Installation across San Marino
- Our door guard installation process, step by step
- Situations we handle regularly
- Tools, parts and hardware we carry
- Trade terms explained
- What affects the cost of door guard installation service
- What you can expect from us
- Practical advice from our locksmiths
- Why this is a job for a locksmith
- What we commit to
- Questions to ask any locksmith
- How to prepare for the visit
- After the visit
- Related locksmith services in San Marino
- Door Guard Installation near San Marino
- Door Guard Installation in San Marino: frequently asked questions
About our door guard installation service
Installing flip guards, swing guards or security latches. Swing-bar guards, the type used on hotel doors, are sturdier than chains and easier to use. Flip locks mounted high on the frame also stop young children from opening doors. We install them into solid backing with long screws and position them clear of existing locks.

Doors in San Marino deal with settling foundations, seasonal humidity, sun-baked frames and years of daily use. Our door guard installation service corrects the misalignment, wear and loose hardware that make doors hard to close or lock, and adds reinforcement where a door is weaker than it should be.
Who uses this service
Door hardware calls in San Marino come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.
This service is part of our door hardware services in San Marino.
When you need door guard installation service
These are the most common reasons customers in San Marino ask for door guard installation service:
- You want something stronger than a chain
- Small children can reach the door handle
- A family member tends to wander
- You want a night latch for extra reassurance
Door Guard Installation across San Marino
Located in Los Angeles County, San Marino is an incorporated city within our San Gabriel Valley service area. Customers anywhere in San Marino, including the Huntington estate area, the Lacy Park area, the Huntington Drive corridor, and the Mission District edge, can have a mobile technician sent directly to them. We serve the 91108 ZIP code.
San Marino is an exclusively residential city of stately homes with strict design standards, where homeowners expect discreet service, high-security locks and careful work on original hardware.
People call us from all over San Marino, including the areas around The Huntington Library, Art Museum and Botanical Gardens, Lacy Park, the Old Mill, and the Huntington Drive shops. A landmark or cross street helps the technician reach you quickly. Technicians usually reach San Marino by Huntington Drive, Sierra Madre Boulevard, San Marino Avenue, Oxford Road, Los Robles Avenue, and Virginia Road. Traffic on those routes affects arrival times, which is why we give you a live estimate on the phone.
Our door guard installation process, step by step
Describe the symptom
Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.
Inspect the whole opening
The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.
Find the root cause
Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.
Agree the repair and price
You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.
Make the repair
Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.
Test under real conditions
The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Situations we handle regularly
- The door drifts open by itself because the latch no longer catches.
- A latch has jammed and someone is stuck in a room.
- The top corner of the door rubs the frame and the paint is wearing through.
- A previous break-in left the jamb cracked around the strike.
- The back door swings outward and its latch is visible through the gap.
- The deadbolt only turns if you pull the door hard toward you.
Tools, parts and hardware we carry
For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.
Trade terms explained
- Deadlatch
- A latch with a small plunger that stops it being pushed back with a card once the door is closed.
- Shim
- A thin spacer placed behind a hinge to adjust how the door sits in its frame.
- Latch guard
- A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
- Jamb
- The vertical part of the door frame that carries the hinges on one side and the strike on the other.
- Strike plate
- The plate on the frame that receives the latch or bolt.
- Latch
- The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
- Bolt throw
- How far a deadbolt extends from the door edge. One inch is the standard for security.
- Door wrap
- A metal plate that wraps the door edge around the lock to reinforce it against splitting.
What affects the cost of door guard installation service
- Number of doors
- Several doors in one visit cost less per door than separate calls.
- Adjustment or replacement
- Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
- Door and frame material
- Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
- Hardware quality
- Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.
- Reinforcement level
- A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
- Extent of damage
- A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to San Marino.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.

Practical advice from our locksmiths
- Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
- Out-swinging doors should have hinges with non-removable pins or security studs.
- Tighten hinge screws once a year. Replace any that spin with three-inch screws into the framing.
- Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
- Replace hollow-core exterior doors. No lock makes a weak door strong.
- If a door suddenly starts sticking, check for plumbing leaks or foundation movement.
- Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
- A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
Why this is a job for a locksmith
Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.
What we commit to
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
How to prepare for the visit
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in San Marino
Customers who need door guard installation service often ask about these as well. Each can usually be handled in the same visit to San Marino.
- Door Latch Repair
Fixing latches that do not catch, stick or fail to retract.
- Security Strike Plate Installation
Installing stronger strike plates with longer screws for added protection.
- Hinge Adjustment
Adjusting or replacing hinges so doors close correctly.
- Door Alignment for Locks
Fixing lock issues caused by sagging doors, shifted frames or misalignment.
- Latch Guard Installation
Installing latch guards to protect against forced entry.
- Strike Plate Adjustment
Adjusting strike plates so doors latch and lock properly.
- Door Chain Installation
Installing door chains or secondary security locks.
- Door Viewer & Peephole Installation
Installing peepholes or door viewers for added safety.
- Door Lock Repair
Repairing lock cylinders, latches, strikes and internal mechanisms.
- Door Hardware Repair
Repairing the locks, latches, strikes, hinges and closers that make a door open, close and secure properly.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
Door Guard Installation near San Marino
We provide the same door guard installation service in the communities around San Marino. See the main door guard installation page or the full list of service areas.
- Door Guard Installation in San Gabriel
- Door Guard Installation in Alhambra
- Door Guard Installation in South Pasadena
- Door Guard Installation in Pasadena
- Door Guard Installation in Temple City
- Door Guard Installation in Rosemead
- Door Guard Installation in Sierra Madre
- Door Guard Installation in Monterey Park
- Door Guard Installation in Arcadia
- Door Guard Installation in Altadena
- Door Guard Installation in El Monte
- Door Guard Installation in South El Monte
Door Guard Installation in San Marino: frequently asked questions
What is a swing bar door guard?
It is a hinged metal bar on the frame that swings over a post on the door, allowing it to open only a few inches. It is stronger than a chain and widely used on hotel room doors.
Why do I have to push my door to lock it in San Marino?
The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.
Why does my door lock fine in summer but not winter?
Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.
Do you work on commercial doors as well?
Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.
How long does a door adjustment take?
Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.
Can door problems be fixed without replacing the lock?
Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.
Will the repair damage my door or paint?
We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.
How can I make my door harder to kick in?
Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.
Do you have a locksmith shop in San Marino?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout San Marino and the rest of the San Gabriel Valley area. All work is done at your location.
How long does it take a locksmith to reach me in San Marino?
It depends on where the nearest technician is and on traffic along Huntington Drive, Sierra Madre Boulevard, or San Marino Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Is there a travel charge for San Marino?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to San Marino, so you know the cost in advance.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
