Quick answer
Commercial Lock Rekeying: Rekeying locks after employee turnover, lost keys, tenant changes or security concerns. Big Daddy Car Key Replacement provides commercial lock rekeying service in Santa Fe Springs as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Lock Rekeying
- Area
- Santa Fe Springs, Los Angeles County, CA (90670)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What commercial lock rekeying involves
- Who uses this service
- Reasons to call for commercial lock rekeying service
- Commercial Lock Rekeying across Santa Fe Springs
- How our commercial lock rekeying service works
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- How commercial lock rekeying service is priced
- Why Santa Fe Springs customers choose Big Daddy
- Tips to avoid problems
- Doing it yourself versus calling a professional
- Our service standards
- Questions to ask any locksmith
- What to have ready when you call
- Aftercare and records
- Related locksmith services in Santa Fe Springs
- Commercial Lock Rekeying near Santa Fe Springs
- Commercial Lock Rekeying in Santa Fe Springs: frequently asked questions
What commercial lock rekeying involves
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns. Rekeying a business resets every cylinder to a new key without replacing hardware. It is the fastest way to cut off keys that left with former staff, contractors or a previous tenant. During a rekey we can also reorganize who opens what, moving you from a pile of unrelated keys to a planned master key system.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For commercial lock rekeying service in Santa Fe Springs, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Who uses this service
Our commercial customers in Santa Fe Springs include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Santa Fe Springs.
Reasons to call for commercial lock rekeying service
People in Santa Fe Springs usually call us for commercial lock rekeying service in situations like these:
- A manager or keyholder was terminated
- You took over a space from another tenant
- A key ring was lost or stolen
- Nobody is sure how many keys exist
Commercial Lock Rekeying across Santa Fe Springs
Santa Fe Springs is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. We cover every part of Santa Fe Springs, including the Telegraph Road corridor, the industrial district along Norwalk Boulevard, the Heritage Park neighborhood, and the Carmenita corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. Service is available throughout ZIP code 90670.
Santa Fe Springs is about four-fifths industrial, with thousands of businesses in warehouses and manufacturing plants, so master key systems, exit devices and fleet key programs dominate.
People call us from all over Santa Fe Springs, including the areas around Heritage Park, the Clarke Estate, the Santa Fe Springs Swap Meet, and the Santa Fe Springs Town Center. A landmark or cross street helps the technician reach you quickly. Santa Fe Springs is served by I-5, I-605, Telegraph Road, Florence Avenue, Norwalk Boulevard, and Carmenita Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our commercial lock rekeying service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A manager is let go and returns only some of the keys issued.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A closer has failed and the front door slams hard enough to rattle the glass.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
How commercial lock rekeying service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Santa Fe Springs. The technician confirms the figure before starting.
Why Santa Fe Springs customers choose Big Daddy
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Tips to avoid problems
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Consider keypad or card access for doors with frequent staff turnover.
- Rekey whenever a keyholder leaves on poor terms or a key cannot be accounted for.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Never chain, padlock or bolt a required exit door while the building is occupied.
Doing it yourself versus calling a professional
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Questions to ask any locksmith
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
Aftercare and records
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Santa Fe Springs
Customers who need commercial lock rekeying service often ask about these as well. Each can usually be handled in the same visit to Santa Fe Springs.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Panic Bar Installation
Installing panic bars, push bars and crash bars for emergency exits.
- Panic Bar Repair
Repairing panic bars that stick, fail to latch, alarm or do not open correctly.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Cash Drawer Lock Replacement
Replacing locks on registers, cash drawers and POS stations.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Office Building Locksmith
Master key systems, access control, door hardware, lock repairs and tenant suite rekeys.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Automotive Locksmith
Mobile key, lock and ignition service for cars, trucks, SUVs, vans, motorcycles and fleets.
- Car Lockout
Unlocking vehicles when keys are locked inside.
Commercial Lock Rekeying near Santa Fe Springs
We provide the same commercial lock rekeying service in the communities around Santa Fe Springs. See the main commercial lock rekeying page or the full list of service areas.
- Commercial Lock Rekeying in Pico Rivera
- Commercial Lock Rekeying in Downey
- Commercial Lock Rekeying in Norwalk
- Commercial Lock Rekeying in Whittier
- Commercial Lock Rekeying in Bell Gardens
- Commercial Lock Rekeying in La Mirada
- Commercial Lock Rekeying in Bellflower
- Commercial Lock Rekeying in Montebello
- Commercial Lock Rekeying in Artesia
- Commercial Lock Rekeying in Commerce
- Commercial Lock Rekeying in Cudahy
- Commercial Lock Rekeying in Paramount
Commercial Lock Rekeying in Santa Fe Springs: frequently asked questions
How often should a business rekey its locks?
Rekey whenever a keyholder leaves on bad terms, a key is lost, or you take over a new space. Businesses with frequent turnover often switch to a restricted keyway or interchangeable cores so future changes take minutes.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you work outside our business hours in Santa Fe Springs?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Can you make car keys in Santa Fe Springs?
Yes. We cut and program car keys on site anywhere in Santa Fe Springs, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Is there a travel charge for Santa Fe Springs?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Santa Fe Springs, so you know the cost in advance.
Are you open 24 hours in Santa Fe Springs?
Yes. We take calls and dispatch to Santa Fe Springs 24 hours a day, including weekends and holidays.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
