Quick answer
Commercial Locksmith: Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings. Big Daddy Car Key Replacement provides commercial locksmith service in Santa Fe Springs as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Commercial Locksmith
- Area
- Santa Fe Springs, Los Angeles County, CA (90670)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- About our commercial locksmith service
- Who uses this service
- Signs you need commercial locksmith service
- Commercial Locksmith across Santa Fe Springs
- How our commercial locksmith service works
- Typical calls we receive
- Tools, parts and hardware we carry
- A short glossary
- How commercial locksmith service is priced
- Why Santa Fe Springs customers choose Big Daddy
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Santa Fe Springs
- Commercial Locksmith near Santa Fe Springs
- Commercial Locksmith in Santa Fe Springs: frequently asked questions
About our commercial locksmith service
Lock, key, door hardware and access control service for offices, stores, restaurants, warehouses and multi-tenant buildings. Commercial locksmithing covers hardware built for heavy use and for code: Grade 1 lever locks, mortise locks, storefront deadlatches, exit devices, door closers, master key systems and electronic access. The goal is doors that lock reliably, let people out safely, and give the right people the right level of access.

Commercial lock problems cost money by the hour: a store that cannot open, a back door that will not secure, keys in the pockets of former staff. For commercial locksmith service in Santa Fe Springs, we send technicians who work with commercial-grade hardware every day and who understand fire, egress and accessibility requirements.
Who uses this service
Our commercial customers in Santa Fe Springs include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
Our full list of locksmith services shows everything we offer, and the Santa Fe Springs locksmith page covers local details.
Signs you need commercial locksmith service
If any of the following sounds familiar, commercial locksmith service is likely what you need:
- Employees with keys have left the company
- A door fails to latch or lock at closing
- You are opening a new location or build-out
- An inspector flagged an exit door
Commercial Locksmith across Santa Fe Springs
Santa Fe Springs is an incorporated city in Los Angeles County, part of the Gateway Cities area we cover every day. We cover every part of Santa Fe Springs, including the Telegraph Road corridor, the industrial district along Norwalk Boulevard, the Heritage Park neighborhood, and the Carmenita corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90670 ZIP code.
Santa Fe Springs is about four-fifths industrial, with thousands of businesses in warehouses and manufacturing plants, so master key systems, exit devices and fleet key programs dominate.
People call us from all over Santa Fe Springs, including the areas around Heritage Park, the Clarke Estate, the Santa Fe Springs Swap Meet, and the Santa Fe Springs Town Center. A landmark or cross street helps the technician reach you quickly. Santa Fe Springs is served by I-5, I-605, Telegraph Road, Florence Avenue, Norwalk Boulevard, and Carmenita Road, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.
How our commercial locksmith service works
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- The back door shows pry marks around the latch after the weekend.
- The storefront door will not latch and the shop cannot be left for the night.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- A closer has failed and the front door slams hard enough to rattle the glass.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
Tools, parts and hardware we carry
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
A short glossary
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
How commercial locksmith service is priced
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
- Key system complexity
- A simple rekey to one key is quick. A master or grand master system takes planning, more pinning time and record keeping.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Santa Fe Springs. The technician confirms the figure before starting.
Why Santa Fe Springs customers choose Big Daddy
- Open 24 hours, every day
- Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Santa Fe Springs.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A workshop that comes to you
- Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.

Practical advice from our locksmiths
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Give each employee access only to the doors their job requires.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Keep a written key log: who holds which key, and the date it was issued and returned.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Consider keypad or card access for doors with frequent staff turnover.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Santa Fe Springs
Customers who need commercial locksmith service often ask about these as well. Each can usually be handled in the same visit to Santa Fe Springs.
- Grand Master Key Systems
Advanced access control where one top-level key opens multiple buildings or departments.
- IC Core Lock Systems
Installing and rekeying interchangeable core lock systems for commercial properties.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Storefront Lock Repair
Repairing locks on glass storefront doors, aluminum doors and commercial entryways.
- Automatic Door Closer Adjustment
Adjusting speed, latch, sweep and backcheck settings.
- Office Lockout Service
Unlocking office doors, private offices, conference rooms, file rooms and storage rooms.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Master Key System
Creating a key hierarchy where owners, managers and employees have different levels of access.
- Retail Store Locksmith Service
Lock repair, rekeying, high-security locks and emergency unlocking for retail stores.
- Door Closer Repair
Adjusting or repairing doors that slam, close too slowly, do not latch or stay open.
- Broken Key Extraction
Removing broken keys from door locks, deadbolts, mailbox locks, gates and other lock cylinders.
- Mobile Locksmith
A locksmith that comes directly to the customer’s location.
- Deadbolt Installation
Installing single-cylinder, double-cylinder, high-security or smart deadbolts.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Lock Installation
Installing new locks on doors that need added security, including exterior doors, bedroom doors, home offices, gates and garage access doors.
Commercial Locksmith near Santa Fe Springs
We provide the same commercial locksmith service in the communities around Santa Fe Springs. See the main commercial locksmith page or the full list of service areas.
- Commercial Locksmith in Pico Rivera
- Commercial Locksmith in Downey
- Commercial Locksmith in Norwalk
- Commercial Locksmith in Whittier
- Commercial Locksmith in Bell Gardens
- Commercial Locksmith in La Mirada
- Commercial Locksmith in Bellflower
- Commercial Locksmith in Montebello
- Commercial Locksmith in Artesia
- Commercial Locksmith in Commerce
- Commercial Locksmith in Cudahy
- Commercial Locksmith in Paramount
Commercial Locksmith in Santa Fe Springs: frequently asked questions
What is the difference between commercial and residential locks?
Commercial locks are built to ANSI/BHMA Grade 1 or 2 for hundreds of thousands of cycles, fit thicker doors and metal frames, and must meet fire and egress codes. Residential hardware is lighter and will fail quickly on a busy business door.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
Can you work outside our business hours in Santa Fe Springs?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Do you have a locksmith shop in Santa Fe Springs?
We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Santa Fe Springs and the rest of the Gateway Cities area. All work is done at your location.
How long does it take a locksmith to reach me in Santa Fe Springs?
It depends on where the nearest technician is and on traffic along I-5, I-605, or Telegraph Road. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.
Which parts of Santa Fe Springs do you serve?
All of Santa Fe Springs, including the Telegraph Road corridor, the industrial district along Norwalk Boulevard, the Heritage Park neighborhood, and the Carmenita corridor, and addresses in ZIP code 90670.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Is Big Daddy Car Key Replacement a mobile locksmith?
Yes. Our technicians travel to you throughout Los Angeles County, Ventura County and the Anaheim area of Orange County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.
