Quick answer
IC Core Lock Systems: Installing and rekeying interchangeable core lock systems for commercial properties. Big Daddy Car Key Replacement provides IC core lock service in Santa Monica as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- IC Core Lock Systems
- Area
- Santa Monica, Los Angeles County, CA (90401, 90402, 90403, 90404, 90405)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Commercial Locksmith Services
- Phone
- (562) 550-7206
On this page
- What IC core lock systems involves
- Customers we serve in Santa Monica
- Signs you need IC core lock service
- IC Core Lock Systems across Santa Monica
- What happens when you call
- Typical calls we receive
- Equipment and hardware on the van
- Trade terms explained
- What affects the cost of IC core lock service
- What you can expect from us
- Practical advice from our locksmiths
- Professional service compared with doing it yourself
- Our service standards
- Questions to ask any locksmith
- What to have ready when you call
- After the visit
- Related locksmith services in Santa Monica
- IC Core Lock Systems near Santa Monica
- IC Core Lock Systems in Santa Monica: frequently asked questions
What IC core lock systems involves
Installing and rekeying interchangeable core lock systems for commercial properties. Interchangeable core locks let you rekey a door in seconds: a special control key pulls the figure-eight core out and a new core drops in, with no disassembly. Schools, retail chains and property managers use them so staff can swap cores themselves after a key is lost, and send the old cores out to be repinned.

Every business in Santa Monica eventually faces the same questions. Who has keys? Do the exit doors work? Would the back door survive a pry bar? Our IC core lock service gives practical answers and carries out the work, usually in a single visit and with as little disruption as possible.
Customers we serve in Santa Monica
Our commercial customers in Santa Monica include retail shops, restaurants, offices, medical and dental practices, warehouses, schools, places of worship, property management companies and homeowners associations. Some need a one-time rekey after a staffing change, others an ongoing arrangement covering key systems, exit hardware and door maintenance across several sites.
This service is part of our commercial locksmith services in Santa Monica.
Signs you need IC core lock service
If any of the following sounds familiar, IC core lock service is likely what you need:
- You rekey often because of staff turnover
- You manage many doors across locations
- You want to rekey without a service call each time
- An existing IC system needs new cores or keys
IC Core Lock Systems across Santa Monica
Located in Los Angeles County, Santa Monica is an incorporated city within our Westside service area. We cover every part of Santa Monica, including Ocean Park, Sunset Park, the Pico District, Mid-City, Wilshire-Montana, North of Montana, and Downtown Santa Monica. Wherever you are in town, the technician comes to your door, driveway or parking space. That includes addresses in ZIP codes 90401, 90402, 90403, 90404, and 90405.
Santa Monica is dense and coastal, with rent-controlled apartment buildings, beach condos, hotels and tech offices, where ocean air wears on hardware and parking-structure car lockouts are frequent.
People call us from all over Santa Monica, including the areas around Santa Monica Pier, Third Street Promenade, Santa Monica Place, Palisades Park, and Bergamot Station. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Santa Monica follows I-10, Pacific Coast Highway, Wilshire Boulevard, Santa Monica Boulevard, Pico Boulevard, and Ocean Avenue. You get a realistic arrival estimate when you call.
What happens when you call
Discuss the need and the site
We ask about the type of business, the doors involved and any deadline, such as an inspection, a tenant move-in or a termination. Photos of the doors help us arrive with the right parts.
Verify authority
Work on a commercial property is done for the owner, the tenant of record, or the property manager. We confirm that before any lock is opened or changed.
Survey the openings
Each door is checked for lock type and function, closer, hinges or pivots, exit hardware and fire rating, so the solution fits both the security need and the code.
Agree scope and price
You receive a clear scope: which doors, what hardware, how many keys, and the cost. For key systems we draft the hierarchy for your approval first.
Carry out the work around your schedule
Rekeys, repairs and installations are done before opening, after closing or during quiet hours when that suits the business better.
Test, document and hand over
Every door is tested for locking, latching and free exit. Keys are stamped and counted, and for master systems you receive a record of what opens what.
When the technician arrives, they introduce themselves, confirm the work you asked for and check your identification. They look at the lock, door or vehicle before touching it, explain what they found and confirm the price. Only then does work begin. When it is finished, you test everything yourself, and you receive an itemized receipt.

Typical calls we receive
- A closer has failed and the front door slams hard enough to rattle the glass.
- The storefront door will not latch and the shop cannot be left for the night.
- A fire inspection notes that the rear exit has a slide bolt and no panic hardware.
- Staff need access to the sales floor but not the office, stockroom or IT closet.
- The back door shows pry marks around the latch after the weekend.
- You are taking over a suite and need the previous tenant’s keys cut off before move-in.
- A manager is let go and returns only some of the keys issued.
Equipment and hardware on the van
Commercial doors use purpose-built hardware. Aluminum storefronts typically carry Adams Rite-style deadlatches and hook bolts driven by a mortise cylinder. Hollow metal and wood doors use Grade 1 cylindrical levers or mortise locks from makers such as Schlage, Sargent, Corbin Russwin and Yale. Exits use panic and fire exit devices, and closers from LCN, Norton and similar makers control the swing. Interchangeable cores allow fast rekeying. We stock the common cylinders, cams, tailpieces, lock bodies and closers.
Trade terms explained
- Restricted keyway
- A key profile whose blanks are supplied only to authorized locksmiths, preventing unauthorized copies.
- Mortise lock
- A heavy-duty lock housed in a pocket cut into the door edge, combining latch and deadbolt in one case.
- Door closer
- A hydraulic device that closes a door at a controlled speed and holds it latched.
- Master key system
- A planned arrangement in which each lock has its own key and a master key opens all of them.
- Interchangeable core
- A removable lock core that a control key releases, allowing a door to be rekeyed in seconds.
- Exit device
- Panic or fire exit hardware that unlatches a door when the horizontal bar is pushed.
- Lock function
- How a lock behaves, such as entry, storeroom, classroom or passage, which determines when it is locked and who can lock it.
- Cylindrical lock
- A lock installed through a round bore in the door, with the mechanism in the lever or knob assembly.
What affects the cost of IC core lock service
- After-hours scheduling
- Work outside normal hours avoids disruption and may be priced differently. We quote both where it matters.
- Code and fire-rating requirements
- Fire-rated openings need listed hardware, and exits may need panic devices. Compliance can dictate the product.
- Number and type of doors
- Aluminum storefront doors, hollow metal doors and wood office doors use different hardware. Pricing reflects how many openings are involved and what each requires.
- Hardware grade and function
- Grade 1 mortise locks and exit devices cost more than cylindrical levers, and they last far longer on busy doors.
- Restricted or high-security keys
- Patented keyways and high-security cylinders cost more per cylinder and per key, in exchange for real control over duplication.
- Electrified hardware
- Doors tied to access control, electric strikes or maglocks need wiring and coordination that add time.
We do not publish a single flat price because every door, lock and vehicle is different. What we do is give you a price range for your specific job when you call (562) 550-7206, before a technician is sent, and confirm the price on site before work begins.
What you can expect from us
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- Car key specialists
- Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.

Practical advice from our locksmiths
- Fit latch guards on out-swinging back doors, where the latch is exposed to prying.
- Never chain, padlock or bolt a required exit door while the building is occupied.
- Store spare keys in a locked key cabinet, not a desk drawer.
- Have storefront pivots and closers serviced before the door starts dragging. It is cheaper than replacing a damaged lock.
- Use a restricted keyway if staff copying keys is a concern. A "Do Not Duplicate" stamp alone does not prevent copies.
- Test exit devices and door closers monthly. A door that does not latch is an unlocked door.
- Consider keypad or card access for doors with frequent staff turnover.
- Give each employee access only to the doors their job requires.
Professional service compared with doing it yourself
Commercial doors are regulated in ways that homes are not. The wrong lock function can trap someone inside a storeroom, a deadbolt on an exit can fail an inspection or cost a life, and unlisted hardware can void a fire door’s rating. A commercial locksmith knows the functions, the grades and the applicable codes, keeps your key system mathematically sound, and documents the work so the next change is straightforward.
Our service standards
Every job follows the same routine. You are told the expected price range on the phone. The technician checks identification and ownership or occupancy on arrival, inspects the lock, door or vehicle, and confirms the price before starting. Locks are opened without damage wherever that is possible, and nothing is drilled or replaced without your agreement. When the work is finished you test it yourself, and you receive an itemized receipt.
Questions to ask any locksmith
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Get an itemized receipt showing labor, parts and the business details.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Once the job is done, file the itemized receipt somewhere you will find it. It records what was fitted and what was done, which helps with insurance claims, landlord or HOA questions, and future service. Write down who has each key and where spares are stored. If a lock or key we worked on starts to feel different, call (562) 550-7206 and describe what is happening so we can look at it. And when something changes, whether that is a new tenant, a staff change or another vehicle, we are available on the same number around the clock.
Related locksmith services in Santa Monica
Customers who need IC core lock service often ask about these as well. Each can usually be handled in the same visit to Santa Monica.
- Commercial Door Hardware
Supplying and installing commercial-grade levers, pulls, hinges, closers, exit devices, strikes and protective plates.
- Restricted Key Systems
Installing key systems that prevent unauthorized key duplication.
- Commercial Lock Rekeying
Rekeying locks after employee turnover, lost keys, tenant changes or security concerns.
- Storefront Lock Replacement
Replacing mortise locks, hook bolts, paddle handles, thumb turns and commercial cylinders.
- Rim Cylinder Replacement
Replacing rim cylinders used with panic bars, exit devices and commercial doors.
- Door Closer Installation
Installing hydraulic door closers on commercial doors.
- Commercial Lock Installation
Installing heavy-duty locks for business properties.
- Property Management Locksmith
Rekeys, lock changes, lockouts, mailbox locks, tenant turnover services and master key systems.
- Desk Lock Repair
Repairing locks for desks, drawers and office furniture.
- Warehouse Locksmith Service
Heavy-duty locks, roll-up door locks, padlocks, access control and master key systems.
- Gate Lock Repair
Fixing stuck, broken, rusted or misaligned gate locks and latches.
- Ignition Repair
Repairing ignition cylinders that are stuck, worn or will not turn.
- Lock Rekey
Changing the internal pins of an existing lock so old keys no longer work. Ideal after moving in, tenant changes, lost keys or employee turnover.
- High Security Locks
Locks engineered to resist picking, bumping, drilling and unauthorized key copying.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
IC Core Lock Systems near Santa Monica
We provide the same IC core lock service in the communities around Santa Monica. See the main IC core lock systems page or the full list of service areas.
- IC Core Lock Systems in Marina del Rey
- IC Core Lock Systems in Culver City
- IC Core Lock Systems in Beverly Hills
- IC Core Lock Systems in Ladera Heights
- IC Core Lock Systems in El Segundo
- IC Core Lock Systems in Topanga
- IC Core Lock Systems in View Park–Windsor Hills
- IC Core Lock Systems in Inglewood
- IC Core Lock Systems in West Hollywood
- IC Core Lock Systems in Sherman Oaks
- IC Core Lock Systems in Encino
- IC Core Lock Systems in Studio City
IC Core Lock Systems in Santa Monica: frequently asked questions
What does IC core mean on a lock?
IC stands for interchangeable core. The keyed portion of the lock is a removable cartridge that a control key releases, so the lock can be rekeyed by swapping the core instead of taking the lock apart.
What brands of commercial hardware do you service?
We work with the major commercial lines, including Schlage, Sargent, Corbin Russwin, Yale, Best, Adams Rite, Von Duprin, LCN, Norton and Kaba, and can match most existing hardware.
How long does it take to rekey a business?
A small shop or office with a handful of doors usually takes about an hour. Larger sites and master key systems are scheduled by scope.
How do we stop employees from copying keys?
Install a restricted key system. Its blanks are available only through the authorized locksmith and copies are cut only for people on your signature list.
Can you work outside our business hours in Santa Monica?
Yes. We are open 24 hours and regularly schedule rekeys, repairs and installations before opening or after closing so customers and staff are not disturbed.
Can you provide documentation for our records?
Yes. For rekeys and key systems we provide a key schedule listing doors, key numbers and the quantity of keys issued.
Do you offer ongoing service for multiple locations?
Yes. We service multi-site businesses and managed properties across our service area and keep key records so later changes are fast.
Who is allowed to authorize lock changes for a business?
The owner, the tenant named on the lease, or the property manager. We verify authority before changing or opening any commercial lock.
Are you open 24 hours in Santa Monica?
Yes. We take calls and dispatch to Santa Monica 24 hours a day, including weekends and holidays.
Which parts of Santa Monica do you serve?
All of Santa Monica, including Ocean Park, Sunset Park, the Pico District, and Mid-City, and addresses in ZIP codes 90401, 90402, 90403, 90404, and 90405.
Can you make car keys in Santa Monica?
Yes. We cut and program car keys on site anywhere in Santa Monica, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
Which areas do you cover?
We serve communities across Los Angeles County, Ventura County and the Anaheim area of Orange County, from the San Fernando Valley and the Westside to the South Bay, the San Gabriel Valley, the Antelope Valley and Ventura County.
Do you check identification?
Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.
Do you only make car keys?
No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.
