Quick answer
Magnetic Lock Installation: Installing maglocks for controlled entry doors. Big Daddy Car Key Replacement provides magnetic lock installation service in Studio City as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.
Last updated
- Service
- Magnetic Lock Installation
- Area
- Studio City, Los Angeles County, CA (91604, 91602)
- Hours
- Open 24 hours, 7 days a week
- Service type
- Mobile, at your location
- Category
- Access Control & Electronic Lock Services
- Phone
- (562) 550-7206
On this page
- About our magnetic lock installation service
- Who uses this service
- Reasons to call for magnetic lock installation service
- Magnetic Lock Installation across Studio City
- How our magnetic lock installation service works
- Typical calls we receive
- Equipment and hardware on the van
- A short glossary
- How magnetic lock installation service is priced
- Why Studio City customers choose Big Daddy
- Tips to avoid problems
- Professional service compared with doing it yourself
- Our service standards
- Choosing a locksmith: a short checklist
- What to have ready when you call
- After the visit
- Related locksmith services in Studio City
- Magnetic Lock Installation near Studio City
- Magnetic Lock Installation in Studio City: frequently asked questions
About our magnetic lock installation service
Installing maglocks for controlled entry doors. A maglock holds a door with an electromagnet, commonly rated at 600 or 1,200 pounds, and releases when power is cut. Because it is fail-safe, code requires reliable ways to get out: typically a motion sensor and a push-to-exit button, plus release on fire alarm. We install maglocks with the required egress devices.

A smart lock or access system is only as good as its installation. The door must be aligned, the hardware matched to the opening, and the software configured with sensible codes and permissions. Our magnetic lock installation service in Studio City takes care of each part and shows you how to use it.
Who uses this service
Electronic lock and access control customers in Studio City range from households that want to stop hiding keys, to short-term rental hosts issuing guest codes, to offices, clinics, gyms, apartment buildings and warehouses that need to control and record who enters.
This service is part of our access control & electronic lock services in Studio City.
Reasons to call for magnetic lock installation service
These are the most common reasons customers in Studio City ask for magnetic lock installation service:
- A glass or aluminum door has no room for a strike
- A gate needs electric locking
- You need a door that releases on fire alarm
- An existing maglock no longer holds
Magnetic Lock Installation across Studio City
Studio City is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. Customers anywhere in Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills, can have a mobile technician sent directly to them. We serve the 91604 and 91602 ZIP codes.
Studio City pairs character homes from the 1930s and 1940s with new hillside builds and production offices, so antique mortise locks and the latest keyless entry systems both show up regularly.
People call us from all over Studio City, including the areas around Radford Studio Center, Fryman Canyon Park, Tujunga Village, and the Studio City Farmers Market. A landmark or cross street helps the technician reach you quickly. Depending on where the closest technician is, the drive into Studio City follows US-101, SR-134, SR-170, Ventura Boulevard, Laurel Canyon Boulevard, and Coldwater Canyon Avenue. You get a realistic arrival estimate when you call.
How our magnetic lock installation service works
Discuss how the door is used
Who needs access, how often people change, whether remote control or an entry log is needed, and what the door is made of all shape the right choice.
Check the door and the site
We measure door thickness, backset and bore, check alignment and weather exposure, and for networked products test Wi-Fi strength at the door or plan the wiring.
Recommend equipment
You get a recommendation with the trade-offs explained: keypad or app, Bluetooth or Wi-Fi, standalone or networked, and the cost of each.
Install the hardware
The door is aligned so the bolt moves freely, then the lock, reader, strike or maglock is fitted to the manufacturer’s template and wired or powered.
Program users and settings
Default codes are removed, individual users are created, schedules and auto-lock are set, and firmware is updated.
Train and document
We walk you through adding and deleting users, changing batteries and using the mechanical override, and leave the settings documented.
On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Typical calls we receive
- A short-term rental needs a new code for every guest.
- A business needs to know who entered the stockroom and when.
- A smart lock reports "jammed" every evening when the door swells.
- An office wants to stop rekeying each time an employee leaves.
- An apartment building wants to replace a shared entry key with fobs.
- A homeowner wants to let a contractor in while at work.
- Children get home from school before their parents and keep losing keys.
Equipment and hardware on the van
We install and service keypad and smart deadbolts and levers from the major residential makers such as Schlage, Yale, Kwikset and August, and commercial electronic locks and access components including standalone keypad levers, card and fob readers, controllers, electric strikes, electromagnetic locks, request-to-exit sensors, push-to-exit buttons, power supplies with battery backup and door position switches. Matching each component to the door is what makes a system reliable.
A short glossary
- Request to exit
- A sensor or button that releases an electrically locked door for someone leaving.
- Smart lock
- A lock that can be operated by a code, phone or other credential, often with remote control.
- Electric strike
- A strike plate with a keeper that releases electrically so a locked door can be pushed open.
- Fail-safe and fail-secure
- A fail-safe lock unlocks when power is lost; a fail-secure lock stays locked.
- Maglock
- An electromagnetic lock that holds a door closed with a magnet and releases when power is cut.
- Access control
- A system that decides who may pass through which door at what time, and records each entry.
- Credential
- Whatever identifies a user: a card, fob, PIN, phone or fingerprint.
- Audit trail
- A stored record of which credential opened a door and when.
How magnetic lock installation service is priced
- Number of doors
- Each controlled door needs its own lock hardware and, for wired systems, cabling back to a controller.
- Wiring and power
- Running cable, adding power supplies and battery backup takes time, especially in finished buildings.
- Door condition
- Doors that bind must be corrected first. Motorized locks cannot overcome friction that a hand can.
- Type of system
- A standalone keypad lock is the least expensive. Smart locks cost more, and wired access control with readers and controllers the most.
- Software and credentials
- Cloud subscriptions, cards and fobs are ongoing or per-user costs worth understanding at the start.
- Life-safety requirements
- Maglocks and controlled exits need release devices and sometimes fire alarm connections to meet code.
Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to Studio City. The technician confirms the figure before starting.
Why Studio City customers choose Big Daddy
- A real, reachable business
- Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
- Most jobs finished in one visit
- Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
- One company for home, business and vehicle
- The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
- A price range before we dispatch
- When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
- Plain explanations
- We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
- Non-destructive methods first
- Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
- Ownership is always verified
- We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.

Tips to avoid problems
- Wipe touchscreens occasionally so smudges do not reveal the digits in your code.
- Avoid obvious codes such as birth years, addresses or repeated digits.
- Keep firmware up to date. Updates often fix security issues.
- Delete factory default codes on the day of installation.
- Keep the mechanical override key somewhere accessible outside the locked area.
- Turn on two-factor authentication for any account that can unlock your door.
- Check that the door closes and latches on its own. Auto-lock cannot secure a door that is ajar.
- Review the user list every few months and remove anyone who no longer needs access.
Professional service compared with doing it yourself
Most complaints about electronic locks trace back to installation: a door out of alignment, a strike that pinches the bolt, a Wi-Fi bridge out of range, default codes left active, or a maglock installed without the release devices the code requires. A locksmith addresses the mechanical side first, then the electronics, and leaves a system that works every day and still lets people out safely when power is lost.
Our service standards
We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.
Choosing a locksmith: a short checklist
- Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
- Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
- Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
- Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
- Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
- In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
- Get an itemized receipt showing labor, parts and the business details.
- Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
What to have ready when you call
- Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
- What you need help with: the type of door, lock or vehicle, and what has happened.
- For vehicles, the year, make and model, and whether you have any working key.
- A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
- A phone number where the technician can reach you on the way.
- Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.
After the visit
Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.
Related locksmith services in Studio City
Customers who need magnetic lock installation service often ask about these as well. Each can usually be handled in the same visit to Studio City.
- Keypad Access Control
Installing keypad entry systems for offices and commercial buildings.
- App-Controlled Lock Setup
Configuring locks that can be controlled by mobile apps.
- Key Fob Access Systems
Installing and programming key fob systems.
- Electric Strike Installation
Installing electric strikes for buzz-in entry systems.
- Smart Lock Troubleshooting
Fixing app connection issues, keypad issues, battery problems and lock calibration.
- Access Control Installation
Installing electronic access systems for offices, warehouses, apartment buildings and commercial facilities.
- Digital Lock Repair
Repairing malfunctioning electronic locks.
- Keyless Entry Installation
Installing keyless entry systems for doors and gates.
- User Access Management
Setting up different codes for employees, tenants, contractors, family members or guests.
- Keypad Lock Installation
Installing keypad deadbolts, digital door locks and electronic entry locks.
- Car Key Replacement
Replacing lost, stolen or damaged car keys.
- Safe Locksmith
Opening, repairing, servicing and changing combinations on home and business safes.
- Emergency Locksmith
Urgent lock and key help for homes, businesses and vehicles at any hour.
- Change Locks
Swapping out the locks on your doors for new ones, with new keys, in one visit.
- House Lockout
Unlocking front doors, back doors, side doors, garage entry doors and interior doors, without damaging the lock whenever possible.
Magnetic Lock Installation near Studio City
We provide the same magnetic lock installation service in the communities around Studio City. See the main magnetic lock installation page or the full list of service areas.
- Magnetic Lock Installation in Valley Village
- Magnetic Lock Installation in Toluca Lake
- Magnetic Lock Installation in North Hollywood
- Magnetic Lock Installation in Sherman Oaks
- Magnetic Lock Installation in West Hollywood
- Magnetic Lock Installation in Valley Glen
- Magnetic Lock Installation in Beverly Hills
- Magnetic Lock Installation in Van Nuys
- Magnetic Lock Installation in Burbank
- Magnetic Lock Installation in Sun Valley
- Magnetic Lock Installation in Encino
- Magnetic Lock Installation in Panorama City
Magnetic Lock Installation in Studio City: frequently asked questions
Do maglocks unlock when the power goes out?
Yes. Maglocks are fail-safe and release without power. A battery backup keeps the door secured during outages while still allowing people to exit.
What happens if the batteries or power fail?
Battery locks warn you for weeks and have a key or external power option. Wired systems should have battery backup, and exits are designed to release safely.
Will an electronic lock work on my existing door?
Most standard doors accept them. Very thick, thin, glass or metal doors need specific models, which we identify during the site check.
How many users can an electronic lock hold?
Residential keypad locks typically hold from a couple of dozen to a few hundred codes. Commercial systems manage thousands of users.
Do I need Wi-Fi for a keypad lock?
No. A standalone keypad lock works with no network at all. Wi-Fi is needed only for remote control and notifications.
Can smart locks be hacked?
Reputable brands use strong encryption, and real-world break-ins overwhelmingly involve force, not hacking. Strong passwords, two-factor authentication and updated firmware keep the risk low.
Can you install a lock I already bought?
Yes. We install customer-supplied locks, correct the door alignment they depend on, and complete the app setup.
Which smart lock is best for a home in Studio City?
It depends on the door and how you want to use it. A keypad deadbolt suits most households. Add Wi-Fi if you need remote control, or choose Bluetooth for longer battery life. We recommend models after seeing the door.
Is there a travel charge for Studio City?
Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Studio City, so you know the cost in advance.
Can you make car keys in Studio City?
Yes. We cut and program car keys on site anywhere in Studio City, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.
Which parts of Studio City do you serve?
All of Studio City, including Colfax Meadows, the Silver Triangle, Footbridge Square, and the Fryman Canyon hills, and addresses in ZIP codes 91604 and 91602.
Where is Big Daddy Car Key Replacement located?
Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.
Can I book an appointment in advance?
Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.
What are your hours?
We are open 24 hours a day, seven days a week, including weekends and holidays.
How can I contact you other than by phone?
You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.
