Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Ram Key Replacement in Valley Glen, CA

Need a Ram key in Valley Glen? We come to you with the key machines and programming equipment, any hour of the day or night.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Ram Key Replacement in Valley Glen, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Ram keys on site in Valley Glen, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Ram
Model years covered
1990–2026
Models covered
5
Service area
Valley Glen, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Ram car keys made and programmed on site

Big Daddy Car Key Replacement cuts and programs Ram keys in Valley Glen for 5 models spanning model years 1990 to 2026. A mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram key replacement in Valley Glen
Ram keys are cut and programmed at the vehicle in Valley Glen.

Ram models we make keys for

Choose a model to see its key types by year and a page for every model year.

Types of Ram keys

Smart proximity key

A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat. For the Ram we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep.

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.

How Ram key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Common Ram key and lock problems

These are the issues we see most often on Ram vehicles in Valley Glen:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Ram right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Ram key replacement across Valley Glen

Located in Los Angeles County, Valley Glen is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Our Ram key replacement service reaches all of Valley Glen, including the Valley College area, the Oxnard Street corridor, and the Fulton Avenue corridor, as well as the streets in between. You do not need to bring anything to a shop. We serve the 91401, 91405, and 91606 ZIP codes.

Valley Glen is a residential pocket of 1940s and 1950s homes and student-friendly apartments around Valley College, where rekeys after roommate changes and budget-friendly spare car keys are common.

If you are out and about near Los Angeles Valley College, the Great Wall of Los Angeles mural, Valley Glen Community Park, or the Tujunga Wash greenway, give us that location when you call and wait somewhere safe and visible. Depending on where the closest technician is, the drive into Valley Glen follows SR-170, Victory Boulevard, Burbank Boulevard, Oxnard Street, Fulton Avenue, and Coldwater Canyon Avenue. You get a realistic arrival estimate when you call.

Getting a Ram key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Ram, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Ram key in Valley Glen
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ram key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Ram key

OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.

Situations we are called to most often

  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The key is locked in the trunk and the trunk release is disabled.
  • The dash reads "key not detected" and the start button does nothing.
  • The key fob went through the washing machine.

Why drivers in Valley Glen choose Big Daddy

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Valley Glen.
Ram car key service in Valley Glen
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ram key

  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.

Choosing a car locksmith you can trust

  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.

Other makes

Ram keys near Valley Glen

We make Ram keys in the communities around Valley Glen as well. See the main Ram key replacement page or the Valley Glen locksmith page.

Ram key replacement in Valley Glen: frequently asked questions

Do I need a PIN code to program a Ram key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Ram with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Does car insurance cover a replacement Ram key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

What do you need from me to make a Ram key?

A photo ID and proof that the vehicle is yours, such as registration, title or insurance, plus access to the vehicle. Having the VIN ready when you call speeds things up.

How many keys should I have for my Ram?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Can you unlock my Ram if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

Can you program a key I bought online for my Ram?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

How much does a Ram key cost?

It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.

Do you also repair the ignition on a Ram?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

Can you make car keys in Valley Glen?

Yes. We cut and program car keys on site anywhere in Valley Glen, including transponder keys, remote head keys and push-to-start smart keys for most makes and models.

Do you have a locksmith shop in Valley Glen?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Valley Glen and the rest of the San Fernando Valley area. All work is done at your location.

How can I contact you other than by phone?

You can email sam@bigdaddycarkeyreplacement.com. For anything urgent, calling (562) 550-7206 is always the fastest route.

What are your hours?

We are open 24 hours a day, seven days a week, including weekends and holidays.

Call Now (562) 550-7206Open 24 hours · mobile locksmith