Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Ram Key Replacement in Arleta, CA

Big Daddy Car Key Replacement makes Ram keys on site in Arleta. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Ram Key Replacement in Arleta, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Ram keys on site in Arleta, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Ram
Model years covered
1990–2026
Models covered
5
Service area
Arleta, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Ram car keys made and programmed on site

Big Daddy Car Key Replacement cuts and programs Ram keys in Arleta for 5 models spanning model years 1990 to 2026. A mobile technician comes to the vehicle, verifies ownership, cuts the key to factory code and programs it to the car. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram key replacement in Arleta
Ram keys are cut and programmed at the vehicle in Arleta.

Ram models we make keys for

Choose a model to see its key types by year and a page for every model year.

Types of Ram keys

Smart proximity key

A smart key never needs to leave your pocket. Antennas in the doors and cabin detect it, the doors unlock when you touch the handle, and the engine starts with a button once the car confirms the key is inside. The key and car exchange encrypted, constantly changing codes. A small metal emergency blade hides inside the fob for the door lock when the fob battery is flat. For the Ram we supply a fob with the exact part number and frequency for the car’s system generation, cut the emergency blade, and program the fob through the diagnostic port using the security access the manufacturer requires. On many vehicles all keys are registered in one session, so bring every key you want to keep.

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.

How Ram key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Common Ram key and lock problems

These are the issues we see most often on Ram vehicles in Arleta:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

How many keys you still have matters more than almost anything else. With one working key present, a second key can usually be copied or added in a short visit. With no keys at all, the technician must first work out the correct cuts, from the VIN or by decoding a lock, and then gain security access to the immobilizer so a new key can be registered. That all-keys-lost process is routine for us and is done on site, but it takes more time. If you are down to your last key, adding a spare today is far cheaper than replacing every key later.

Stranded with your Ram right now?

Stuck without a working key? First make sure you are somewhere safe and visible. Think about whether a spare exists at home or with a family member. Then call (562) 550-7206 and give us the year, make, model, your location and whether the vehicle is locked or open. We will tell you the likely cost and how long a technician will take to reach you. For a child or pet locked inside, call 911 before anything else.

Ram key replacement across Arleta

Arleta is a neighborhood of the City of Los Angeles in Los Angeles County, part of the San Fernando Valley area we cover every day. We cover every part of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 91331 ZIP code.

Arleta is mostly postwar single-family tract homes from the late 1940s and 1950s, many still carrying original knob locks and aging deadbolts that are due for a rekey or an upgrade.

People call us from all over Arleta, including the areas around Branford Park, Arleta High School, and Hansen Dam Recreation Area. A landmark or cross street helps the technician reach you quickly. Arleta is served by I-5, SR-170, Woodman Avenue, Van Nuys Boulevard, Osborne Street, and Terra Bella Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Getting a Ram key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Ram, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Ram key in Arleta
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ram key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Ram key

Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Model year and system generation
Two cars with the same name can use very different systems a few years apart. Newer encrypted systems need more expensive equipment and sometimes online authorization.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

Whoever finds a lost key might find the car. During programming we can usually remove lost keys from the vehicle’s memory, which stops them starting the engine. That does not change the mechanical door lock, so if theft is a concern, the door cylinders can be rekeyed to a new cut as well.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Immobilizer
The anti-theft system that prevents the engine from running unless it recognizes a programmed key.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.

Situations we are called to most often

  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • The key is locked in the trunk and the trunk release is disabled.
  • A used car was sold with one worn key and no spare.
  • A hardware-store copy opens the door but the engine will not start.
  • The dash reads "key not detected" and the start button does nothing.

Why drivers in Arleta choose Big Daddy

A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Open 24 hours, every day
Lock and key problems do not wait for business hours, and neither do we. A dispatcher answers the phone at any time of day or night, on weekends and on holidays, and sends a technician to Arleta.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
One company for home, business and vehicle
The same team handles house lockouts, storefront hardware, master key systems, safes and car keys. You do not need a different number for each kind of lock.
Ram car key service in Arleta
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ram key

  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Photograph your VIN and keep a copy of your registration on your phone so ownership can be verified quickly.
  • If a key starts sticking, deal with it early. A worn key or ignition gets worse, never better.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Do not hang heavy keychains from the ignition key. The weight wears the ignition cylinder over time.

Choosing a car locksmith you can trust

  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Get an itemized receipt showing labor, parts and the business details.

Other makes

Ram keys near Arleta

We make Ram keys in the communities around Arleta as well. See the main Ram key replacement page or the Arleta locksmith page.

Ram key replacement in Arleta: frequently asked questions

Do I need a PIN code to program a Ram key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Ram with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Is a locksmith-made Ram key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you program a key I bought online for my Ram?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Do I have to tow my Ram to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Does car insurance cover a replacement Ram key?

Some comprehensive policies, roadside plans and dealer key-protection plans do. Check your policy; we provide an itemized receipt you can submit.

Can you make a Ram key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

How many keys should I have for my Ram?

At least two. With two working keys you are never stranded, and on some makes two keys let you add another yourself.

Do you also repair the ignition on a Ram?

Yes. If the key will not turn, will not come out, or the cylinder is damaged, we repair or replace the ignition and match it to your key where possible.

How long does it take a locksmith to reach me in Arleta?

It depends on where the nearest technician is and on traffic along I-5, SR-170, or Woodman Avenue. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Is there a travel charge for Arleta?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to Arleta, so you know the cost in advance.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Is Big Daddy Car Key Replacement a mobile locksmith?

Yes. Our technicians travel to you throughout Los Angeles County and Ventura County. Keys are cut and programmed, and locks are opened, rekeyed, repaired and installed, at your location.

Call Now (562) 550-7206Open 24 hours · mobile locksmith