Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Ram ProMaster Key Replacement in Arleta, CA

Big Daddy Car Key Replacement makes Ram ProMaster keys on site in Arleta. A mobile technician comes to the car, verifies ownership, cuts the key to factory code and programs it.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Ram ProMaster Key Replacement in Arleta, CA by Big Daddy Car Key Replacement

Quick answer

Big Daddy Car Key Replacement cuts and programs Ram ProMaster keys on site in Arleta, CA, 24 hours a day, including transponder keys, remote head keys and smart keys where the vehicle uses them. Call (562) 550-7206 for a price range.

Last updated

Vehicle
Ram ProMaster
Model years covered
2014–present
Service area
Arleta, CA
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your vehicle
Phone
(562) 550-7206
On this page

Ram ProMaster keys made and programmed on site

The Ram ProMaster was sold in the United States for model years 2014–present, and its key technology changed along the way. We make keys for every one of those years in Arleta: cut to factory code, programmed to the immobilizer where the car has one, and tested before we leave. Ram trucks use remote-head and Fobik keys, with Keyless Enter-N-Go proximity fobs on higher trims since 2013. Trucks from 2018 on have a secure gateway module, and ProMaster vans use a laser-cut flip key.

Ram ProMaster key replacement in Arleta
Ram ProMaster keys are cut and programmed at the vehicle in Arleta.

Ram ProMaster key types by model year

The table shows the key most Ram ProMaster models left the factory with in each period. Trim levels and options vary, so we always confirm against your vehicle and VIN.

Typical factory key equipment for the Ram ProMaster.
Model yearsTypical keyTransponder chipBlade
2014–2026Remote head keyYesLaser-cut

Choose your Ram ProMaster year

Select a model year for the exact key type, programming method and what to expect.

Types of Ram ProMaster keys

Remote head key

A remote head key puts three parts into one housing: a cut metal blade, a transponder chip that satisfies the immobilizer, and a remote transmitter for lock, unlock, trunk and panic. Flip keys, where the blade folds into the fob, work the same way. The remote and the chip are separate systems and are often programmed in separate steps. For the Ram ProMaster we match the remote by its frequency and part number, cut the blade to code, program the transponder so the engine starts, and then pair the remote buttons. If your old key’s electronics still work and only the shell or blade is broken, moving them into a new case is a cheaper repair.

How Ram key and immobilizer systems work

Chrysler, Dodge, Jeep and Ram vehicles use the Sentry Key Immobilizer System. Early versions used a grey-headed transponder key, later ones the Fobik, a plastic pod that turns in the dash, and then Keyless Enter-N-Go proximity fobs. Programming requires the vehicle’s four-digit PIN. From the 2018 model year a Secure Gateway Module blocks unauthorized diagnostic access, so registered equipment is needed to program keys.

Common Ram key and lock problems

These are the issues we see most often on Ram vehicles in Arleta:

  • Fobik keys that are not recognized because of a worn wireless ignition node
  • "Key not detected" messages on push-button models with a weak fob battery
  • Lost keys on vehicles protected by the secure gateway, which defeats generic tools
  • Worn door and ignition wafers on older Wranglers and Cherokees

All keys lost or just need a spare?

There are two very different jobs hiding behind the phrase "key replacement." If you still have one working key, we are adding a key: the existing key proves the cuts and, on most systems, helps authorize the new one, so the work is quick. If every key is gone, it is an all-keys-lost job. The cut code has to be generated from the VIN or read from a lock, and the immobilizer must be accessed with security credentials before it will accept a new key. Both are done at your vehicle, but the second takes longer and costs more, which is the best argument for having a spare made now.

Stranded with your Ram right now?

If you are stranded right now, start with safety. Move to a lit, visible place and stay with the vehicle if it is safe to do so. Check the obvious: a second key at home, a key someone else holds, or a roadside plan that covers lockouts. Then call (562) 550-7206 with the year, make and model, the exact location and whether the car is locked. If a child or pet is inside a locked vehicle, call 911 first.

Ram ProMaster key replacement across Arleta

Located in Los Angeles County, Arleta is a neighborhood of the City of Los Angeles within our San Fernando Valley service area. Our Ram key replacement service reaches all of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, as well as the streets in between. You do not need to bring anything to a shop. That includes addresses in ZIP code 91331.

Arleta is mostly postwar single-family tract homes from the late 1940s and 1950s, many still carrying original knob locks and aging deadbolts that are due for a rekey or an upgrade.

If you are out and about near Branford Park, Arleta High School, or Hansen Dam Recreation Area, give us that location when you call and wait somewhere safe and visible. Arleta is served by I-5, SR-170, Woodman Avenue, Van Nuys Boulevard, Osborne Street, and Terra Bella Street, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Getting a Ram ProMaster key made, step by step

  1. Call with the year, make and model

    Tell us you need a key for a Ram ProMaster, whether any working key remains, and where the vehicle is parked. We give you a price range and an estimated arrival time before anyone drives out.

  2. We verify ownership

    Before making any key we check a photo ID against the registration, title or insurance for the vehicle. It takes a minute and it protects every owner from having a key made for their car by someone else.

  3. We identify the exact key system

    Using the VIN and the vehicle itself, the technician confirms the key blank, chip type, remote frequency and immobilizer generation, so the right parts and procedure are used the first time.

  4. The key is cut to code

    The blade is cut on a code machine in the van to original factory depths, not traced from a worn key. It is then tested in the door, trunk and ignition.

  5. The key is programmed to the car

    For chip and smart keys, we connect to the diagnostic port, obtain security access, and register the new key. Lost keys can usually be erased from memory at the same time.

  6. Everything is tested before we leave

    We start the engine several times, test every remote button and the emergency blade, and make sure any keys you already had still work.

Programming a Ram ProMaster key in Arleta
Keys are programmed through the vehicle’s diagnostic port and tested before we leave.

What to have ready

  • A government-issued photo ID
  • The vehicle registration, title or current insurance card in your name
  • The VIN, found on the dashboard at the base of the windshield, the driver’s door jamb, and your registration
  • Any remaining keys or remotes, including ones that no longer work
  • The vehicle itself, parked where a technician can open the driver’s door fully

Mobile locksmith or dealership for a Ram key?

Mobile locksmithDealership
Where the work happensAt your vehicle, wherever it is parkedAt the dealer’s service department
Towing with all keys lostNot neededUsually required
AvailabilityOpen 24 hours, including weekends and holidaysService department business hours
Typical waitOften the same dayAppointment, plus time to order the key by VIN
Key optionsOEM or quality aftermarket where availableOEM only
Restricted late-model systemsSome require a dealer key; we tell you up frontSupported

A car key that is cut wrong can jam in the ignition, and a programming attempt with the wrong procedure can lock an immobilizer for hours or erase the keys that still work. Automotive locksmiths invest in manufacturer-level tools and current software for exactly that reason. We also verify ownership before making any key, a step that anonymous online sellers and key kiosks skip.

What affects the cost of a Ram ProMaster key

Key technology
A plain metal key costs the least, a transponder key more, a remote head key more again, and a proximity smart key the most, because of the parts and the programming involved.
Whether a working key exists
Copying or adding a key with a working original present is quicker than an all-keys-lost job, which requires generating the cut code and gaining security access to the immobilizer.
Time and location
Late-night calls and long distances can affect the price. You are given the range on the phone, before dispatch.
Lock or ignition condition
If the ignition or door lock is worn or damaged, it may need repair so the new key turns properly. We check before cutting.
OEM or aftermarket parts
Where a quality aftermarket key exists, it usually costs less than the manufacturer’s part and works the same. Some vehicles accept only OEM keys.

Call (562) 550-7206 with the year, make and model and we will give you a price range for your vehicle before a technician is sent.

Lost keys and vehicle security

A lost key is a security question as well as an inconvenience. When we program new chip or smart keys, the vehicle’s list of accepted keys can usually be rewritten so that missing keys no longer start the engine. A lost key with a cut blade could still open the door mechanically, so if you believe the key was stolen, ask about rekeying the door locks too.

Equipment we bring to the vehicle

Automotive work relies on specialized equipment. Our vans carry a computer-controlled key machine that cuts edge-cut and laser-cut blades by code, Lishi tools for reading and picking vehicle locks, and several diagnostic key programmers covering domestic, Asian and European immobilizer systems, including secure gateway access for late-model vehicles. We stock transponder keys, remote head keys, flip keys and proximity fobs for the most common vehicles on Southern California roads.

Car key terms explained

Diagnostic port
The connector under the dashboard through which keys are programmed to the vehicle’s computer.
VIN
The 17-character vehicle identification number, found on the dashboard, the door jamb and the registration.
Transponder
A small chip in the key head that answers a coded radio signal from the car so the engine is allowed to run.
All keys lost
A job where no working key exists, so the key must be generated from the VIN or the lock and programmed from scratch.
Proximity key
A fob the car detects nearby, allowing keyless entry and push-button start. Also called a smart key.
Remote head key
A key with the lock and unlock buttons built into its head, alongside the blade and chip.
Laser-cut key
A key with a groove milled into the side of a thick blade, cut on a computer-controlled machine. Also called a sidewinder.

Situations we are called to most often

  • A hardware-store copy opens the door but the engine will not start.
  • The only key to the car is lost somewhere between the beach, the restaurant and home.
  • A used car was sold with one worn key and no spare.
  • The ignition will not turn and the key will not come out.
  • The key fob went through the washing machine.

Why drivers in Arleta choose Big Daddy

A real, reachable business
Big Daddy Car Key Replacement has a published address at 450 W Wilken Way, Anaheim, CA 92802, one phone number and one email address. You always know who you are dealing with.
A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Ram car key service in Arleta
Big Daddy Car Key Replacement: mobile, open 24 hours.

Looking after your Ram key

  • Be cautious with very cheap keys sold online. Many have the wrong chip or frequency and cannot be programmed.
  • Have a spare made while you still have one working key. It is the cheapest and fastest car key you can buy.
  • Attach a tracker tag to your keys if you misplace them often, and remove any tag showing your address.
  • Replace a fob battery at the first low-battery warning, and use the brand and size printed inside the fob.
  • Keep the spare at home, not in the car. A key hidden in or under the vehicle defeats the immobilizer for a thief.
  • When buying a used car, insist on all keys and have lost ones erased from the car’s memory.
  • Check your auto insurance and roadside plan. Some reimburse key replacement or lockout service.

Choosing a car locksmith you can trust

  • Get an itemized receipt showing labor, parts and the business details.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.

Other Ram models

Ram ProMaster keys near Arleta

We make Ram ProMaster keys in the communities around Arleta as well. See the main Ram ProMaster key replacement page or the Arleta locksmith page.

Ram ProMaster key replacement in Arleta: frequently asked questions

Do I need a PIN code to program a Ram key?

Yes. The immobilizer PIN is required for key programming. We retrieve it from the vehicle or through authorized channels after verifying ownership.

Can you program keys for a 2018 or newer Ram with the secure gateway?

Yes. We use equipment registered for secure gateway access, so late-model vehicles can be programmed on site.

Is a locksmith-made Ram key as good as a dealer key?

Yes. A key cut to factory code with the correct chip and remote performs the same as one from the parts counter. Where we use aftermarket parts, we say so and offer OEM when available.

Can you unlock my Ram ProMaster if the keys are inside?

Yes. We open vehicles without damage using air wedges and reach tools or by picking the door lock, at any hour.

How much does a Ram ProMaster key cost?

It depends on the key type for your exact trim and on whether you still have a working key. Call (562) 550-7206 with the year, make and model and we will give you a price range before sending anyone.

Do I have to tow my Ram ProMaster to you?

No. We are a mobile service. The key machines and programming equipment are in the van, and the work is done where the vehicle is parked.

Can you make a Ram ProMaster key at night or on a weekend?

Yes. We are open 24 hours, seven days a week, including holidays, which is when dealership parts and service departments are closed.

Will my lost Ram ProMaster key still start the car?

For chip and smart keys we can usually erase lost keys from the car’s memory during programming, so they no longer start the engine. A lost key could still open the door mechanically unless the locks are rekeyed.

Can you program a key I bought online for my Ram ProMaster?

We can try, if it is the correct part. We test the chip and frequency first. Many low-cost online keys are the wrong type or locked to another car, so we cannot guarantee a customer-supplied key.

Which parts of Arleta do you serve?

All of Arleta, including Branford Park, the Arleta Avenue corridor, and the Woodman Avenue corridor, and addresses in ZIP code 91331.

Do you have a locksmith shop in Arleta?

We are a mobile service. Our business address is 450 W Wilken Way, Anaheim, CA 92802, and our technicians travel to customers throughout Arleta and the rest of the San Fernando Valley area. All work is done at your location.

Where is Big Daddy Car Key Replacement located?

Our business address is 450 W Wilken Way, Anaheim, CA 92802. Service is mobile, so the work is carried out wherever you and your vehicle or property are.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Call Now (562) 550-7206Open 24 hours · mobile locksmith