Skip to content
Big Daddy Car Key Replacement logo(562) 550-7206

Security Strike Plate Installation in East Los Angeles, CA

Big Daddy Car Key Replacement provides security strike plate installation service throughout East Los Angeles. We come to you at any hour with the tools and parts to finish the job on site. Installing stronger strike plates with longer screws for added protection.

(562) 550-7206
  • Open 24 hours, every day
  • We come to you
  • Price range before we dispatch
Security Strike Plate Installation in East Los Angeles, CA by Big Daddy Car Key Replacement

Quick answer

Security Strike Plate Installation: Installing stronger strike plates with longer screws for added protection. Big Daddy Car Key Replacement provides security strike plate installation service in East Los Angeles as a mobile service, open 24 hours. Call (562) 550-7206 for a price range and an estimated arrival time.

Last updated

Service
Security Strike Plate Installation
Area
East Los Angeles, Los Angeles County, CA (90022, 90023, 90063)
Hours
Open 24 hours, 7 days a week
Service type
Mobile, at your location
Category
Door Hardware Services
Phone
(562) 550-7206
On this page

What security strike plate installation involves

Installing stronger strike plates with longer screws for added protection. The small strike plate supplied with most locks is held by short screws into thin door-jamb trim. A security strike is longer, made of heavier steel, and fastened with three-inch screws that reach the wall framing, so a kick has to break the stud, not just the trim.

Security Strike Plate Installation in East Los Angeles, CA by Big Daddy Car Key Replacement
Security Strike Plate Installation in East Los Angeles: mobile service, carried out at your location.

A lock can only do its job if the door around it works. Hinges, latches, strike plates and frames move over time, and the lock is usually blamed for problems that begin elsewhere. Our security strike plate installation service in East Los Angeles looks at the whole opening and fixes the cause, so the door closes with a push and locks without force.

Who we help in East Los Angeles

Door hardware calls in East Los Angeles come from homeowners with doors that stick or will not latch, landlords preparing units, businesses with heavily used entrances, and anyone who has had a door forced. Older buildings with settled frames and newer homes with lightly built doors both benefit from proper alignment and reinforcement.

This service is part of our door hardware services in East Los Angeles.

Reasons to call for security strike plate installation service

These are the most common reasons customers in East Los Angeles ask for security strike plate installation service:

  • Your strike plate is held by short screws
  • The jamb is cracked or has been repaired before
  • You are installing a new deadbolt
  • You want an inexpensive, meaningful upgrade

Security Strike Plate Installation across East Los Angeles

East Los Angeles is an unincorporated community in Los Angeles County, part of the Central & South Los Angeles area we cover every day. We cover every part of East Los Angeles, including Belvedere, City Terrace, Maravilla, Eastmont, and Wellington Heights. Wherever you are in town, the technician comes to your door, driveway or parking space. We serve the 90022, 90023, and 90063 ZIP codes.

East Los Angeles is a dense, long-established community of early-1900s homes, duplexes and family-run storefronts along Whittier Boulevard, where older mortise locks and security doors need experienced hands.

People call us from all over East Los Angeles, including the areas around the Whittier Boulevard arch, Belvedere Community Regional Park, the East Los Angeles Civic Center, and Atlantic Park. A landmark or cross street helps the technician reach you quickly. East Los Angeles is served by I-5, I-710, SR-60, I-10, Whittier Boulevard, and Cesar E. Chavez Avenue, and our drivers know how those routes behave at different hours. We quote an arrival time based on where the nearest van actually is.

Our security strike plate installation process, step by step

  1. Describe the symptom

    Tell us what the door does: rubs, rattles, will not latch, needs lifting to lock, or sticks at certain times of year. Symptoms point to the cause.

  2. Inspect the whole opening

    The technician checks the hinge screws, the gap around the door, the latch, the bolt, the strike plate and the frame for movement or damage.

  3. Find the root cause

    Marks on the strike plate, uneven gaps and loose hinges show whether the door has dropped, the frame has shifted, or the hardware itself has failed.

  4. Agree the repair and price

    You hear what needs adjusting, what needs replacing and what would be worth reinforcing, with prices, before work starts.

  5. Make the repair

    Hinges are re-anchored or shimmed, strikes repositioned and secured with long screws, latches replaced and bolt pockets deepened as required.

  6. Test under real conditions

    The door is closed normally, latched and locked several times. The deadbolt should extend fully without pushing or pulling on the door.

On arrival the technician confirms who you are and what is needed, inspects the job, and tells you the price before starting. If the situation differs from what was described on the phone, you hear the options first. Once the work is complete, you try every lock and key yourself and are given an itemized receipt.

Locksmith providing security strike plate installation service in East Los Angeles, California
Our technicians work from fully equipped vans throughout East Los Angeles.

Situations we handle regularly

  • A previous break-in left the jamb cracked around the strike.
  • The back door swings outward and its latch is visible through the gap.
  • A latch has jammed and someone is stuck in a room.
  • The top corner of the door rubs the frame and the paint is wearing through.
  • The deadbolt only turns if you pull the door hard toward you.
  • The door drifts open by itself because the latch no longer catches.

Tools, parts and hardware we carry

For door hardware work we carry replacement latches and deadlatches, adjustable and extended strike plates, heavy security strikes, jamb reinforcement kits, wrap-around door plates in common finishes and sizes, latch guards, residential and commercial hinges, hinge shims, three-inch case-hardened screws, door viewers, swing-bar guards and chains. For commercial openings we add pivot sets, continuous hinges and door closers. The right small part, fitted properly, is usually all a troublesome door needs.

Trade terms explained

Latch guard
A plate covering the gap at the lock so the latch cannot be reached with a pry tool.
Door wrap
A metal plate that wraps the door edge around the lock to reinforce it against splitting.
Strike plate
The plate on the frame that receives the latch or bolt.
Bolt throw
How far a deadbolt extends from the door edge. One inch is the standard for security.
Deadlatch
A latch with a small plunger that stops it being pushed back with a card once the door is closed.
Shim
A thin spacer placed behind a hinge to adjust how the door sits in its frame.
Latch
The spring-loaded bolt that holds a door closed and retracts when the handle is turned.
Jamb
The vertical part of the door frame that carries the hinges on one side and the strike on the other.

What affects the cost of security strike plate installation service

Door and frame material
Wood is the easiest to adjust. Metal frames, aluminum storefronts and fiberglass doors need different methods and parts.
Extent of damage
A split jamb or cracked door edge from a kick-in needs reinforcement hardware and more time than a simple alignment.
Number of doors
Several doors in one visit cost less per door than separate calls.
Adjustment or replacement
Tightening, shimming and repositioning are labor only. New latches, hinges, strikes or reinforcement plates add parts.
Reinforcement level
A security strike is inexpensive. A full jamb shield and door wrap kit costs more and adds much more strength.
Hardware quality
Heavy-duty hinges, commercial closers and Grade 1 latches cost more than light residential parts and last longer.

Prices depend on the details above, so the honest way to quote is to ask a few questions first. Call (562) 550-7206, describe the job, and you will hear a price range before anyone drives to East Los Angeles. The technician confirms the figure before starting.

What you can expect from us

A price range before we dispatch
When you call (562) 550-7206 we ask a few questions and tell you what your type of job normally costs. If the technician finds something different on site, you hear about it before any work starts.
Non-destructive methods first
Locks are picked or bypassed and vehicles opened with purpose-made tools wherever possible. Drilling and replacement are last resorts, used only when a lock has truly failed and only with your agreement.
Plain explanations
We explain what is wrong, what the options are and what each costs in ordinary language, and we recommend the least expensive fix that actually solves the problem.
Ownership is always verified
We check identification and proof of ownership or occupancy before opening a door, making a car key or changing a lock. It is the safeguard that stops anyone else from doing the same to your property.
A workshop that comes to you
Our vans carry key cutting machines, key programmers, lock stock and installation tools. Car keys are made beside the car and locks are serviced at your door, so there is no tow and no trip to a shop.
Most jobs finished in one visit
Because the common locks, cylinders, key blanks and parts are already on the van, lockouts, rekeys, installations and key replacements are normally completed the first time we come out.
Car key specialists
Car keys are in our name for a reason. We cut and program transponder keys, remote head keys and push-to-start smart keys for the great majority of makes, and we tell you honestly when a vehicle needs a dealer-supplied key.
Door Hardware locksmith work in East Los Angeles, CA
Door Hardware Services from Big Daddy Car Key Replacement.

Tips to avoid problems

  • Out-swinging doors should have hinges with non-removable pins or security studs.
  • Do not file the strike larger each season. Fix the alignment so the bolt enters cleanly.
  • A deadbolt must extend fully to be locked. If it stops short, it can be pushed back.
  • Lubricate latches and hinges lightly once a year, and wipe away the excess.
  • Replace hollow-core exterior doors. No lock makes a weak door strong.
  • Look for shiny rub marks on the strike plate. They show exactly where the latch or bolt is hitting.
  • Seal the top and bottom edges of wood doors with paint so they absorb less moisture and swell less.
  • If a door suddenly starts sticking, check for plumbing leaks or foundation movement.

Why this is a job for a locksmith

Door adjustment is a matter of small measurements with large effects. Moving a strike two millimetres the wrong way, over-shimming a hinge or deepening a mortise carelessly can turn a sticking door into one that will not close. A locksmith reads the wear marks, corrects the cause instead of the symptom, and uses fasteners and reinforcement that actually reach the structure of the wall.

What we commit to

We keep to a consistent set of standards on every call. You hear a price range before dispatch and a confirmed price before work begins. Identification is checked, because the same care that slows a job by a minute protects your own property from someone else. Non-destructive methods come first. You try every key and lock yourself before the technician leaves, and you are given an itemized receipt.

How to choose a locksmith you can trust

  • Ask for a price range for your specific job before anyone is sent, and confirm the price on site before work starts.
  • In California, locksmith companies are licensed by the Bureau of Security and Investigative Services. You can ask for the license number and check it on the state’s website.
  • Be cautious of advertised service fees that seem far too low. The final bill in those cases is often many times higher.
  • Get an itemized receipt showing labor, parts and the business details.
  • Keep the number of a locksmith you trust in your phone, so you are not choosing one under pressure.
  • Expect the technician to ask for your identification. A locksmith who opens doors without checking who is asking is a risk to everyone.
  • Ask whether the lock will be picked or drilled. Standard locks rarely need drilling, and you should be told why if it is proposed.
  • Ask for the legal business name and where the company is based. A legitimate locksmith answers the phone with a name, not a generic phrase.

How to prepare for the visit

  • Your exact location: a street address, or a cross street and a landmark if you are in a parking lot or on the road.
  • What you need help with: the type of door, lock or vehicle, and what has happened.
  • For vehicles, the year, make and model, and whether you have any working key.
  • A photo ID, and something that connects you to the property or vehicle, such as registration, a lease or a utility bill.
  • A phone number where the technician can reach you on the way.
  • Any detail that affects access: a gate code, a parking level, a guard desk or a locked lobby.

After the visit

Keep the receipt from your visit. It lists the hardware fitted and the work carried out, which is useful for insurance, for a landlord or homeowners association, and for anyone who works on the same locks later. Make a note of who holds each new key and where the spares are kept. If anything we worked on does not feel right in the days that follow, call (562) 550-7206 and tell us what you have noticed so it can be looked at promptly. When circumstances change, such as a new tenant, a new employee or a new vehicle, the same number reaches us at any hour.

Customers who need security strike plate installation service often ask about these as well. Each can usually be handled in the same visit to East Los Angeles.

Security Strike Plate Installation near East Los Angeles

We provide the same security strike plate installation service in the communities around East Los Angeles. See the main security strike plate installation page or the full list of service areas.

Security Strike Plate Installation in East Los Angeles: frequently asked questions

Are longer strike plate screws really worth it?

Yes. Replacing short strike screws with three-inch screws into the stud, and fitting a heavier strike, is one of the cheapest and most effective ways to resist a kick-in.

How can I make my door harder to kick in?

Install a reinforced strike plate with three-inch screws into the stud, a wrap-around plate at the lock, and long screws in the hinges. Together they resist the forces of a kick far better than standard hardware.

How long does a door adjustment take?

Most single-door alignments and strike adjustments take 30 to 60 minutes. Reinforcement kits take a little longer.

Can door problems be fixed without replacing the lock?

Very often. Most latching and locking complaints are alignment issues, and the existing lock works properly once the door and strike are corrected.

Will the repair damage my door or paint?

We work carefully and keep changes within the existing hardware footprint wherever possible. Any new mortising is cut cleanly.

Why do I have to push my door to lock it in East Los Angeles?

The bolt and the strike plate no longer line up, usually because the door has sagged on its hinges or the frame has moved. Realigning the door and resetting the strike fixes it.

Why does my door lock fine in summer but not winter?

Wood swells and shrinks with humidity, moving the bolt relative to the strike. A proper adjustment leaves clearance for that movement.

Do you work on commercial doors as well?

Yes. We service aluminum storefront doors, hollow metal doors, pivots, continuous hinges, closers and exit devices.

Are you open 24 hours in East Los Angeles?

Yes. We take calls and dispatch to East Los Angeles 24 hours a day, including weekends and holidays.

How long does it take a locksmith to reach me in East Los Angeles?

It depends on where the nearest technician is and on traffic along I-5, I-710, or SR-60. We give you a specific estimated arrival time when you call (562) 550-7206, not a blanket promise.

Is there a travel charge for East Los Angeles?

Any travel charge is part of the price range you are given on the phone before a technician is dispatched to East Los Angeles, so you know the cost in advance.

Can I book an appointment in advance?

Yes. Non-urgent work such as rekeying, lock installation, spare car keys and commercial projects can be scheduled for a time that suits you.

Do you check identification?

Yes. We verify identity and ownership or occupancy before opening locks, making vehicle keys or changing locks.

Do you only make car keys?

No. Car keys are our specialty, and we also provide residential, commercial and emergency locksmith services: lockouts, rekeying, lock installation and repair, door hardware, access control, safes and more.

How do I get a price?

Call (562) 550-7206. Tell us what you need and where you are, and we will give you a price range for the job before sending anyone.

Call Now (562) 550-7206Open 24 hours · mobile locksmith